OEM Ford Freestyle Spark Plug

Ford Freestyle Spark Plug Parts Questions & Experts Answers

• Spark Plug
  AGSF-32W-MX
  Q: How to service the spark plugs on Ford Freestyle?

  A: A technician should start spark plug maintenance by removing the upper intake manifold. The service on Ignition Coil electrical connectors and bolts first requires disconnecting these connections then applying a small turning action for better bolt removal. You should install and tighten the ignition coil bolts to 6 Nm torque setting (53 pounds inch measurement). During removal and installation of spark plugs hand tools must be used because other tools may damage both the cylinder head and the spark plug assembly. You need to use compressed air for clearing all debris from the area where the spark plugs will be installed. When installing the spark plugs tighten them to 15 Nm (11 lb-ft). Follow manufacturer guidelines to use either a wire brush or professional spark plug cleaner to clean the spark plugs before beginning any inspection process. Proceed with the removal reversal steps while correcting the plug gap when needed. Lens on installing the ignition coils requires coating them with Silicon Brake Caliper grease and Dielectric compound XG-3-A that meets Ford specifications ESE-M1C171-A so that you can lubricate the coil boots.