How to remove and replace the front bumper cover for all on Ford Fusion?

All vehicles require front bumper cover replacement after positioning them on a hoist while keeping them in neutral gear. The first step involves unfastening 6 pin-type retainers located on each bumper side before proceeding to remove the 8 fender splash shield screws that exist across four points on each side. The installation of the next step requires removing the 4 air deflector bolts. The removal of electrical connectors from the fog lamps must happen if the vehicle includes this equipment. Manufacturers should remove 5 bolts that secure the radiator grille's top section for all MKZ models. To remove the radiator grille top on Fusion and Milan models you should first remove 2 bolts and 2 pin-type retainers before taking out the side marker lamp. Unclip the bumper cover by pulling the rearward upper portion out from its mounting bracket until separation occurs while releasing the tabs adhering it to the mounting bracket. The process to attach the new bumper cover requires doing everything in reverse order to the removal steps.

How to service and repair the front bumper cover on Ford Fusion?

Service and repair of Ford Fusion and Mercury Milan and MKZ front bumper covers requires first positioning the vehicle on a hoist with it set to neutral. The first step includes taking out six pin-type retainers which are present on each side and following with the removal of eight fender splash shield screws which are found four on each side. You need to remove the 4 air deflector bolts from the work. Rationale service requires the removal of 5 bolts which secure the radiator grille top on the MKZ model. The Fusion, Milan owners need to extract two bolts and two pin-type retainers which are situated atop the radiator grille. The fog lamp system requires removal of electrical wiring connections before these steps can commence. The installation of the front bumper cover requires performing the opposite steps of removal.

OEM Ford Fusion Bumper

Bumper Fascia

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

32 Bumpers found

View related parts
Ford Fusion Impact Bar, Rear Part Number: AE5Z-17906-A
$154.03 MSRP: $224.20
You Save: $70.17 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Rear; Bumper Cover Reinforcement Beam, Rear; Bumper Impact Bar, Rear
- Manufacturer Note: Impact Bar - Steel
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2012 Ford Fusion | Hybrid, S, SE, SEL, Sport | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.5 L GAS
View related parts
Ford Fusion Bumper Cover, Front Part Number: HS7Z-17D957-AAPTM
$531.40 MSRP: $780.32
You Save: $248.92 (32%)
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Front; Bumper Cover, Front
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2017-2018 Ford Fusion | Energi Platinum, Energi SE, Energi Titanium, Platinum, Platinum Hybrid, S, S Hybrid, SE, SE Hybrid, Titanium, Titanium Hybrid | 4 Cyl 1.5 L GAS, 4 Cyl 2.0 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 4 Cyl 2.5 L FLEX, 4 Cyl 2.5 L GAS
View related parts
Ford Fusion Impact Bar, Front Part Number: AE5Z-17757-A
$192.48 MSRP: $297.03
You Save: $104.55 (36%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Front; Bumper Cover Reinforcement Beam, Front; Bumper Impact Bar, Front
- Manufacturer Note: Impact Bar - Steel
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2012 Ford Fusion | Hybrid, S, SE, SEL, Sport | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.5 L GAS
View related parts
Ford Fusion Bumper Cover, Front Part Number: HS7Z-17D957-VAPTM
$580.44 MSRP: $859.92
You Save: $279.48 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Front; Bumper Cover, Front
- Manufacturer Note: Paint to match
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2017-2019 Ford Fusion | Sport | 6 Cyl 2.7 L GAS
View related parts
Ford Fusion Tow Bracket Cover, Front Part Number: HS7Z-17A900-APTM
$15.02 MSRP: $21.87
You Save: $6.85 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover - Bumper; Tow Eye Cap, Front
- Manufacturer Note: Paint to match
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2017-2018 Ford Fusion | Energi Platinum, Energi SE, Energi Titanium, Platinum, Platinum Hybrid, S, S Hybrid, SE, SE Hybrid, Titanium, Titanium Hybrid | 4 Cyl 1.5 L GAS, 4 Cyl 2.0 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 4 Cyl 2.5 L FLEX, 4 Cyl 2.5 L GAS
View related parts
Ford Fusion Tow Bracket Cover, Front Passenger Side Part Number: ES7Z-17A900-AAPTM
$43.12 MSRP: $61.68
You Save: $18.56 (31%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Cover - Bumper; Tow Hook Cover, Front Right
- Position: Front Passenger Side
- Replaces: DS7Z-17A900-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2016 Ford Fusion | Energi SE, Energi Titanium, S, S Hybrid, SE, SE Hybrid, Titanium, Titanium Hybrid | 4 Cyl 1.5 L GAS, 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 4 Cyl 2.5 L GAS
View related parts
Ford Fusion Bumper Cover, Front Part Number: DS7Z-17D957-AAPTM
$447.83 MSRP: $493.20
You Save: $45.37 (10%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Front; Bumper Cover, Front
- Manufacturer Note: Paint to match
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2016 Ford Fusion | Energi SE, Energi Titanium, S, S Hybrid, SE, SE Hybrid, Titanium, Titanium Hybrid | 4 Cyl 1.5 L GAS, 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 4 Cyl 2.5 L GAS
View related parts
Ford Fusion Impact Bar, Rear Part Number: 6E5Z-17906-AA
$204.83 MSRP: $298.15
You Save: $93.32 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Rear; Bumper Impact Bar, Rear
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2009 Ford Fusion | S, SE, SEL | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
Ford Fusion Impact Bar, Front Part Number: 6E5Z-17757-AA
$287.57 MSRP: $422.28
You Save: $134.71 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Front; Bumper Impact Bar, Front
- Manufacturer Note: Impact Bar - Steel
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2009 Ford Fusion | S, SE, SEL | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
Ford Fusion Bumper Cover, Front Part Number: KS7Z-17D957-SCPTM
$567.11 MSRP: $840.17
You Save: $273.06 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Front; Bumper Cover, Front
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2019-2020 Ford Fusion | Energi Titanium, S, SE, SE Hybrid, SEL, SEL Hybrid, Titanium, Titanium Hybrid | 4 Cyl 1.5 L GAS, 4 Cyl 2.0 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 4 Cyl 2.5 L FLEX, 4 Cyl 2.5 L GAS
View related parts
Ford Fusion Bumper Cover, Rear Part Number: KS7Z-17K835-ADPTM
$655.04 MSRP: $1039.75
You Save: $384.71 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Rear; Bumper Cover, Rear
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2019-2020 Ford Fusion | Energi Titanium, S, SE, SE Hybrid, SEL, SEL Hybrid, Sport, Titanium, Titanium Hybrid | 4 Cyl 1.5 L GAS, 4 Cyl 2.0 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 4 Cyl 2.5 L FLEX, 4 Cyl 2.5 L GAS, 6 Cyl 2.7 L GAS
View related parts
Ford Fusion Bumper Cover, Rear Part Number: 8E5Z-17K835-GAPTM
$161.82 MSRP: $235.55
You Save: $73.73 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover; Bumper Cover, Rear
- Position: Rear
- Replaces: 6E5Z-17K835-CAPTM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2009 Ford Fusion | S, SE, SEL | 4 Cyl 2.3 L GAS
View related parts
Ford Fusion Bumper Cover, Rear Part Number: KS7Z-17K835-SBPTM
$821.27 MSRP: $1216.70
You Save: $395.43 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Rear; Bumper Cover, Rear
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2019-2020 Ford Fusion | Energi Titanium, S, SE, SE Hybrid, SEL, SEL Hybrid, Sport, Titanium, Titanium Hybrid | 4 Cyl 1.5 L GAS, 4 Cyl 2.0 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 4 Cyl 2.5 L FLEX, 4 Cyl 2.5 L GAS, 6 Cyl 2.7 L GAS
View related parts
Ford Fusion Bumper Cover, Front Part Number: KS7Z-17D957-SBPTM
$552.83 MSRP: $819.00
You Save: $266.17 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Front; Bumper Cover, Front
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2019-2020 Ford Fusion | Energi Titanium, S, SE, SE Hybrid, SEL, SEL Hybrid, Titanium, Titanium Hybrid | 4 Cyl 1.5 L GAS, 4 Cyl 2.0 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 4 Cyl 2.5 L FLEX, 4 Cyl 2.5 L GAS
View related parts
Ford Fusion Bumper Cover, Front Part Number: ES7Z-17D957-EPTM
$172.23 MSRP: $250.70
You Save: $78.47 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover; Bumper Cover, Front
- Position: Front
- Replaces: DS7Z-17757-EAPTM, ES7Z-17757-EAPTM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2016 Ford Fusion | Energi SE, Energi Titanium, S, S Hybrid, SE, SE Hybrid, Titanium, Titanium Hybrid | 4 Cyl 1.5 L GAS, 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 4 Cyl 2.5 L GAS
View related parts
Ford Fusion Tow Bracket Cover, Front Part Number: KS7Z-17A900-AA
$25.09 MSRP: $35.58
You Save: $10.49 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover - Bumper; Tow Hook Cover, Front
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2019-2020 Ford Fusion | Energi Titanium, S, SE, SE Hybrid, SEL, SEL Hybrid, Titanium, Titanium Hybrid | 4 Cyl 1.5 L GAS, 4 Cyl 2.0 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 4 Cyl 2.5 L FLEX, 4 Cyl 2.5 L GAS
View related parts
Ford Fusion Bumper Cover, Rear Part Number: KS7Z-17K835-SAPTM
$906.81 MSRP: $1007.56
You Save: $100.75 (10%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Rear; Bumper Cover, Rear
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2019-2020 Ford Fusion | Energi Titanium, S, SE, SE Hybrid, SEL, SEL Hybrid, Sport, Titanium, Titanium Hybrid | 4 Cyl 1.5 L GAS, 4 Cyl 2.0 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 4 Cyl 2.5 L FLEX, 4 Cyl 2.5 L GAS, 6 Cyl 2.7 L GAS
View related parts
Ford Fusion Bumper Cover, Front Part Number: HS7Z-17D957-APTM
$889.65 MSRP: $988.50
You Save: $98.85 (10%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Front; Bumper Cover, Front
- Manufacturer Note: Paint to match
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2017-2018 Ford Fusion | Energi Platinum, Energi SE, Energi Titanium, Platinum, Platinum Hybrid, S, S Hybrid, SE, SE Hybrid, Titanium, Titanium Hybrid | 4 Cyl 1.5 L GAS, 4 Cyl 2.0 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 4 Cyl 2.5 L FLEX, 4 Cyl 2.5 L GAS
View related parts
Ford Fusion Bumper Cover, Rear Part Number: HS7Z-17K835-VFPTM
$625.24 MSRP: $688.59
You Save: $63.35 (10%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Rear; Bumper Cover, Rear
- Position: Rear
- Replaces: DS7Z-17K835-BAPTM, ES7Z-17K835-BPTM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2018 Ford Fusion | Energi Platinum, Energi SE, Energi Titanium, Platinum, Platinum Hybrid, S, S Hybrid, SE, SE Hybrid, Sport, Titanium, Titanium Hybrid | 4 Cyl 1.5 L GAS, 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 4 Cyl 2.5 L FLEX, 4 Cyl 2.5 L GAS, 6 Cyl 2.7 L GAS
View related parts
Ford Fusion Bumper Cover, Front Part Number: HS7Z-17D957-VBPTM
Product Specifications
- Other Name: Bumper Assembly - Front; Bumper Cover, Front
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2017-2019 Ford Fusion | Sport | 6 Cyl 2.7 L GAS

| Page 1 of 2 |Next >

1-20 of 32 Results

Ford Fusion Bumper

OEM Bumper boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Bumper with long life and a perfect fit. Come to our website and find genuine Ford Fusion parts. We keep a wide inventory of OEM Fusion parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

Ford Fusion Bumper Parts and Q&A

Bumper Cover, Front
6E5Z-17D957-CAPTM
Q: How to remove and replace the front bumper cover for all on Ford Fusion?
A:
All vehicles require front bumper cover replacement after positioning them on a hoist while keeping them in neutral gear. The first step involves unfastening 6 pin-type retainers located on each bumper side before proceeding to remove the 8 fender splash shield screws that exist across four points on each side. The installation of the next step requires removing the 4 air deflector bolts. The removal of electrical connectors from the fog lamps must happen if the vehicle includes this equipment. Manufacturers should remove 5 bolts that secure the radiator grille's top section for all MKZ models. To remove the radiator grille top on Fusion and Milan models you should first remove 2 bolts and 2 pin-type retainers before taking out the side marker lamp. Unclip the bumper cover by pulling the rearward upper portion out from its mounting bracket until separation occurs while releasing the tabs adhering it to the mounting bracket. The process to attach the new bumper cover requires doing everything in reverse order to the removal steps.
Impact Bar, Front
6E5Z-17757-AA
Q: How to service and repair the front bumper cover on Ford Fusion?
A:
Service and repair of Ford Fusion and Mercury Milan and MKZ front bumper covers requires first positioning the vehicle on a hoist with it set to neutral. The first step includes taking out six pin-type retainers which are present on each side and following with the removal of eight fender splash shield screws which are found four on each side. You need to remove the 4 air deflector bolts from the work. Rationale service requires the removal of 5 bolts which secure the radiator grille top on the MKZ model. The Fusion, Milan owners need to extract two bolts and two pin-type retainers which are situated atop the radiator grille. The fog lamp system requires removal of electrical wiring connections before these steps can commence. The installation of the front bumper cover requires performing the opposite steps of removal.