How to service the rear bumper cover on Ford Fusion?

The service of the rear bumper cover begins by taking out the rear lamp assembly. Begin the service by removing three pin-type retainers on each side of the rear splash shield and degrade two pin-type retainers on each side of the lower rear bumper cover. The service on rear bumper cover begins by removing two bolts together with two pin-type retainers which secure the top portion of the rear bumper cover. The correct next step requires screw removal of the two upper bumper cover screws positioned at each side. A vehicle with parking aid system requires disconnecting its electrical connector. Milan and MKZ owners should disconnect the license plate lamp electrical connector as well. Use the opposite order of steps when reinstalling the rear bumper cover after its removal.

How to remove and replace the front bumper cover for all on Ford Fusion?

All vehicles require front bumper cover replacement after positioning them on a hoist while keeping them in neutral gear. The first step involves unfastening 6 pin-type retainers located on each bumper side before proceeding to remove the 8 fender splash shield screws that exist across four points on each side. The installation of the next step requires removing the 4 air deflector bolts. The removal of electrical connectors from the fog lamps must happen if the vehicle includes this equipment. Manufacturers should remove 5 bolts that secure the radiator grille's top section for all MKZ models. To remove the radiator grille top on Fusion and Milan models you should first remove 2 bolts and 2 pin-type retainers before taking out the side marker lamp. Unclip the bumper cover by pulling the rearward upper portion out from its mounting bracket until separation occurs while releasing the tabs adhering it to the mounting bracket. The process to attach the new bumper cover requires doing everything in reverse order to the removal steps.

OEM Ford Fusion Bumper Cover

Bumper Shell

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

25 Bumper Covers found

View related parts
Ford Fusion Bumper Cover, Front Part Number: ES7Z-17757-DAPTM
$340.06 MSRP: $533.18
You Save: $193.12 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Front; Bumper Cover, Front
- Manufacturer Note: Paint to match
- Position: Front
- Replaces: DS7Z-17757-DAPTM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2016 Ford Fusion | Energi SE, Energi Titanium, Hev Taxi Version, Hybrid, Performance, Plug-In Hybrid, Police, S, S Hybrid, SE, SE Hybrid, Series 10, Series 15, Series 20, Series 25, Series 40, Series 5, Series 50, Series 55, Titanium, Titanium Hybrid | 1.5L L4, 1.6L L4, 2.0L L4, 2.5L L4, 4 Cyl 1.5 L GAS, 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 4 Cyl 2.5 L GAS
View related parts
Ford Fusion Bumper Cover, Front Part Number: HS7Z-17D957-VAPTM
$622.56 MSRP: $922.32
You Save: $299.76 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Front; Bumper Cover, Front
- Manufacturer Note: Paint to match
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2017-2019 Ford Fusion | Sport | 6 Cyl 2.7 L GAS
View related parts
Ford Fusion Bumper Cover, Front Part Number: HS7Z-17D957-BBPTM
$653.00 MSRP: $967.40
You Save: $314.40 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Front; Bumper Cover, Front
- Position: Front
- Replaces: HS7Z-17D957-BAPTM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2017-2018 Ford Fusion | Energi Platinum, Energi SE, Energi Titanium, Platinum, Platinum Hybrid, S, S Hybrid, SE, SE Hybrid, Titanium, Titanium Hybrid | 4 Cyl 1.5 L GAS, 4 Cyl 2.0 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 4 Cyl 2.5 L FLEX, 4 Cyl 2.5 L GAS
View related parts
Ford Fusion Bumper Cover, Front Part Number: HS7Z-17D957-AAPTM
$446.73 MSRP: $700.42
You Save: $253.69 (37%)
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Front; Bumper Cover, Front
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2017-2018 Ford Fusion | Energi Platinum, Energi SE, Energi Titanium, Platinum, Platinum Hybrid, S, S Hybrid, SE, SE Hybrid, Titanium, Titanium Hybrid | 4 Cyl 1.5 L GAS, 4 Cyl 2.0 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 4 Cyl 2.5 L FLEX, 4 Cyl 2.5 L GAS
View related parts
Ford Fusion Bumper Cover, Front Part Number: DS7Z-17D957-AAPTM
$444.60 MSRP: $489.65
You Save: $45.05 (10%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Front; Bumper Cover, Front
- Manufacturer Note: Paint to match
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2016 Ford Fusion | Energi SE, Energi Titanium, S, S Hybrid, SE, SE Hybrid, Titanium, Titanium Hybrid | 4 Cyl 1.5 L GAS, 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 4 Cyl 2.5 L GAS
View related parts
Ford Fusion Bumper Cover, Front Part Number: KS7Z-17D957-SAPTM
$586.36 MSRP: $930.73
You Save: $344.37 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Front; Bumper Cover, Front
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2019-2020 Ford Fusion | Energi Titanium, S, SE, SE Hybrid, SEL, SEL Hybrid, Titanium, Titanium Hybrid | 4 Cyl 1.5 L GAS, 4 Cyl 2.0 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 4 Cyl 2.5 L FLEX, 4 Cyl 2.5 L GAS
View related parts
Ford Fusion Bumper Cover, Front Part Number: HS7Z-17D957-CBPTM
$456.26 MSRP: $715.37
You Save: $259.11 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Front; Bumper Cover, Front
- Position: Front
- Replaces: HS7Z-17D957-CAPTM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2017-2018 Ford Fusion | Energi Platinum, Energi SE, Energi Titanium, Platinum, Platinum Hybrid, S, S Hybrid, SE, SE Hybrid, Titanium, Titanium Hybrid | 4 Cyl 1.5 L GAS, 4 Cyl 2.0 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 4 Cyl 2.5 L FLEX, 4 Cyl 2.5 L GAS
View related parts
Ford Fusion Bumper Cover, Front Part Number: 6E5Z-17D957-CAPTM
$208.52 MSRP: $324.80
You Save: $116.28 (36%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover; Bumper Cover, Front
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2009 Ford Fusion | S, SE, SEL | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
Ford Fusion Bumper Cover, Front Part Number: KS7Z-17D957-SBPTM
$552.83 MSRP: $819.00
You Save: $266.17 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Front; Bumper Cover, Front
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2019-2020 Ford Fusion | Energi Titanium, S, SE, SE Hybrid, SEL, SEL Hybrid, Titanium, Titanium Hybrid | 4 Cyl 1.5 L GAS, 4 Cyl 2.0 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 4 Cyl 2.5 L FLEX, 4 Cyl 2.5 L GAS
View related parts
Ford Fusion Bumper Cover, Front Part Number: KS7Z-17D957-SCPTM
$514.02 MSRP: $754.80
You Save: $240.78 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Front; Bumper Cover, Front
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2019-2020 Ford Fusion | Energi Titanium, S, SE, SE Hybrid, SEL, SEL Hybrid, Titanium, Titanium Hybrid | 4 Cyl 1.5 L GAS, 4 Cyl 2.0 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 4 Cyl 2.5 L FLEX, 4 Cyl 2.5 L GAS
View related parts
Ford Fusion Bumper Cover, Rear Part Number: HS7Z-17K835-VEPTM
$573.33 MSRP: $849.38
You Save: $276.05 (33%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Rear; Bumper Cover, Rear
- Position: Rear
- Replaces: DS7Z-17K835-CAPTM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2018 Ford Fusion | Energi Platinum, Energi SE, Energi Titanium, Hev Taxi Version, Hybrid, Performance, Platinum, Platinum Hybrid, Plug-In Hybrid, Police, S, S Hybrid, SE, SE Hybrid, Series 10, Series 15, Series 20, Series 25, Series 40, Series 5, Series 50, Series 55, Sport, Titanium, Titanium Hybrid | 1.5L L4, 1.6L L4, 2.0L L4, 2.5L L4, 2.7L V6, 4 Cyl 1.5 L GAS, 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 4 Cyl 2.5 L FLEX, 4 Cyl 2.5 L GAS, 6 Cyl 2.7 L GAS
View related parts
Ford Fusion Bumper Cover, Rear Part Number: KS7Z-17K835-ADPTM
$584.31 MSRP: $927.48
You Save: $343.17 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Rear; Bumper Cover, Rear
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2019-2020 Ford Fusion | Energi Titanium, S, SE, SE Hybrid, SEL, SEL Hybrid, Sport, Titanium, Titanium Hybrid | 4 Cyl 1.5 L GAS, 4 Cyl 2.0 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 4 Cyl 2.5 L FLEX, 4 Cyl 2.5 L GAS, 6 Cyl 2.7 L GAS
View related parts
Ford Fusion Bumper Cover, Rear Part Number: KS7Z-17K835-SBPTM
$782.42 MSRP: $1159.13
You Save: $376.71 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Rear; Bumper Cover, Rear
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2019-2020 Ford Fusion | Energi Titanium, S, SE, SE Hybrid, SEL, SEL Hybrid, Sport, Titanium, Titanium Hybrid | 4 Cyl 1.5 L GAS, 4 Cyl 2.0 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 4 Cyl 2.5 L FLEX, 4 Cyl 2.5 L GAS, 6 Cyl 2.7 L GAS
View related parts
Ford Fusion Bumper Cover, Front Part Number: ES7Z-17D957-EPTM
$198.14 MSRP: $288.42
You Save: $90.28 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover; Bumper Cover, Front
- Position: Front
- Replaces: DS7Z-17757-EAPTM, ES7Z-17757-EAPTM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2016 Ford Fusion | Energi SE, Energi Titanium, Hev Taxi Version, Hybrid, Performance, Plug-In Hybrid, Police, S, S Hybrid, SE, SE Hybrid, Series 10, Series 15, Series 20, Series 25, Series 40, Series 5, Series 50, Series 55, Titanium, Titanium Hybrid | 1.5L L4, 1.6L L4, 2.0L L4, 2.5L L4, 4 Cyl 1.5 L GAS, 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 4 Cyl 2.5 L GAS
View related parts
Ford Fusion Bumper Cover, Rear Part Number: 8E5Z-17K835-GAPTM
$161.82 MSRP: $235.55
You Save: $73.73 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover; Bumper Cover, Rear
- Position: Rear
- Replaces: 6E5Z-17K835-CAPTM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2009 Ford Fusion | Base, High Version - Car, Hybrid, Low Version - Car, Mid Version - Car, S, SE, SEL, Sport | 2.3L L4, 4 Cyl 2.3 L GAS
View related parts
Ford Fusion Bumper Cover, Front Part Number: ES7Z-17D957-CPTM
$479.17 MSRP: $703.63
You Save: $224.46 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover; Bumper Cover, Front
- Position: Front
- Replaces: DS7Z-17D957-CAPTM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2016 Ford Fusion | Energi SE, Energi Titanium, Hev Taxi Version, Hybrid, Performance, Plug-In Hybrid, Police, S, S Hybrid, SE, SE Hybrid, Series 10, Series 15, Series 20, Series 25, Series 40, Series 5, Series 50, Series 55, Titanium, Titanium Hybrid | 1.5L L4, 1.6L L4, 2.0L L4, 2.5L L4, 4 Cyl 1.5 L GAS, 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 4 Cyl 2.5 L GAS
View related parts
Ford Fusion Bumper Cover, Front Part Number: HS7Z-17D957-APTM
$727.71 MSRP: $808.56
You Save: $80.85 (10%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Front; Bumper Cover, Front
- Manufacturer Note: Paint to match
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2017-2018 Ford Fusion | Energi Platinum, Energi SE, Energi Titanium, Platinum, Platinum Hybrid, S, S Hybrid, SE, SE Hybrid, Titanium, Titanium Hybrid | 4 Cyl 1.5 L GAS, 4 Cyl 2.0 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 4 Cyl 2.5 L FLEX, 4 Cyl 2.5 L GAS
View related parts
Ford Fusion Bumper Cover, Rear Part Number: AE5Z-17K835-AAPTM
$475.82 MSRP: $559.53
You Save: $83.71 (15%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover; Bumper Cover, Rear
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2012 Ford Fusion | Hybrid, S, SE, SEL, Sport | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.5 L GAS
View related parts
Ford Fusion Bumper Cover, Rear Part Number: KS7Z-17K835-SAPTM
$864.03 MSRP: $960.04
You Save: $96.01 (10%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Rear; Bumper Cover, Rear
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2019-2020 Ford Fusion | Energi Titanium, S, SE, SE Hybrid, SEL, SEL Hybrid, Sport, Titanium, Titanium Hybrid | 4 Cyl 1.5 L GAS, 4 Cyl 2.0 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 4 Cyl 2.5 L FLEX, 4 Cyl 2.5 L GAS, 6 Cyl 2.7 L GAS
View related parts
Ford Fusion Bumper Cover, Front Part Number: AE5Z-17D957-BAPTM
$324.62 MSRP: $357.51
You Save: $32.89 (10%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Front; Bumper Cover, Front
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2012 Ford Fusion | Hybrid, S, SE, SEL, Sport | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.5 L GAS

| Page 1 of 2 |Next >

1-20 of 25 Results

Ford Fusion Bumper Cover

OEM Bumper Cover boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Bumper Cover with long life and a perfect fit. Come to our website and find genuine Ford Fusion parts. We keep a wide inventory of OEM Fusion parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

The Bumper Cover of your Ford Fusion is the soft outer panel that sits over the rigid bumper. It finishes off the car's look. In some configurations, it also helps enhance the airflow for better speed and economy. The Bumper Cover can have cutouts or hollows that allow air into the radiator, oil coolers, power steering coolers, or even to the brakes. It also often provides openings that are for fog lights, parking lights, turn signals, tow hook access, and other such hardware. The Bumper Cover openings may include decorative inserts and grille pieces. Small covers may also be provided. If the specified lights or components are not applied, the small cover will be applied to maintain styling. Due to impacts, exposure to the elements, and road debris, the Bumper Cover may crack, fade, or break, necessitating replacement that varies depending on trim and body style. Restoration of a damaged unit helps to maintain the protective functions of Ford front and rear bumpers. In addition, it keeps the Ford Fusion looking whole and aerodynamically optimized. Therefore, the Ford Bumper Cover is an essential part for any Fusion.

Ford Fusion Bumper Cover Parts and Q&A

Bumper Cover, Rear
8E5Z-17K835-GAPTM
Q: How to service the rear bumper cover on Ford Fusion?
A:
The service of the rear bumper cover begins by taking out the rear lamp assembly. Begin the service by removing three pin-type retainers on each side of the rear splash shield and degrade two pin-type retainers on each side of the lower rear bumper cover. The service on rear bumper cover begins by removing two bolts together with two pin-type retainers which secure the top portion of the rear bumper cover. The correct next step requires screw removal of the two upper bumper cover screws positioned at each side. A vehicle with parking aid system requires disconnecting its electrical connector. Milan and MKZ owners should disconnect the license plate lamp electrical connector as well. Use the opposite order of steps when reinstalling the rear bumper cover after its removal.
Bumper Cover, Front
6E5Z-17D957-CAPTM
Q: How to remove and replace the front bumper cover for all on Ford Fusion?
A:
All vehicles require front bumper cover replacement after positioning them on a hoist while keeping them in neutral gear. The first step involves unfastening 6 pin-type retainers located on each bumper side before proceeding to remove the 8 fender splash shield screws that exist across four points on each side. The installation of the next step requires removing the 4 air deflector bolts. The removal of electrical connectors from the fog lamps must happen if the vehicle includes this equipment. Manufacturers should remove 5 bolts that secure the radiator grille's top section for all MKZ models. To remove the radiator grille top on Fusion and Milan models you should first remove 2 bolts and 2 pin-type retainers before taking out the side marker lamp. Unclip the bumper cover by pulling the rearward upper portion out from its mounting bracket until separation occurs while releasing the tabs adhering it to the mounting bracket. The process to attach the new bumper cover requires doing everything in reverse order to the removal steps.