Warranty: This genuine part is guaranteed by Ford's
factory warranty.
Fits the following Vehicles:
2006-2020 Ford Fusion | Hybrid, S, SE, SEL, Titanium | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L FLEX, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS
Other Name: Pump Assembly - Water; Engine Auxiliary Water Pump; Engine Water Pump; Water Pump
Replaces: DS7Z-8C419-B, DS7Z-8C419-D, PW-530
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
Fits the following Vehicles:
2013-2020 Ford Fusion | Energi Platinum, Energi SE, Energi Titanium, Platinum Hybrid, S Hybrid, SE Hybrid, SEL Hybrid, Titanium Hybrid | 4 Cyl 2.0 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV)
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
Fits the following Vehicles:
2013-2020 Ford Fusion | Energi Platinum, Energi SE, Energi Titanium, Platinum Hybrid, S Hybrid, SE Hybrid, SEL Hybrid, Titanium Hybrid | 4 Cyl 2.0 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV)
Other Name: Pump Assembly - Water; Engine Water Pump Assembly; Water Pump Cover; Water Pump Assembly; Engine Water Pump; Water Pump
Replaces: 9L8Z-8501-B
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
Fits the following Vehicles:
2010-2012 Ford Fusion | SE, SEL | 6 Cyl 3.0 L FLEX
Ford Fusion Water Pump
Welcome to our website where you can discover high-quality, genuine Ford Fusion Water Pump. We offer an extensive inventory of OEM Ford Fusion Water Pump at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.
Ford Fusion Water Pump Parts Questions & Experts Answers
Q: How to service the Water Pump on a 2.3L engine on Ford Fusion?
A: The service of a 2.3L coolant pump begins by hoisting the vehicle in NEUTRAL position and draining its cooling system. The service requires separating the accessory Drive Belt and coolant pump pulley through removing the three bolts securing each one. The new pulley bolts need to be tightened at a torque value of 20 Nm (177 lb-in). The correct positioning of the coolant pump on the engine block is essential to avoid damage before installing fasteners. After proper seating, remove the three bolts together with the coolant pump and discard the ancient O-ring seal. Before attaching the new coolant pump apply engine coolant on the seal O-ring and fasten the bolts to 10 Nm torque (89 lb-in). Complete the cooling system filling process while performing a bleeding operation.