How to Service and Repair the Ignition Lock Cylinder on Ford Mustang?

You must detach the steering column cover and lower steering column shroud by their 3 screws to reach and work on the ignition lock cylinder. Turn the key to RUN position and push a small punch tool into the opening to take out the ignition lock cylinder. Put the ignition lock cylinder back in place by following the steps of removal then grease the cylinder when completed.

How to Remove and Install an Ignition Lock Cylinder in a Steering Column on Ford Mustang?

One must start the functional lock cylinder repair process by disconnecting the battery ground wire. Starting with the ignition key you should turn it to the RUN position to remove the ignition switch lock cylinder. A 1/8-inch drift needs application through the access hole to push the ignition switch lock cylinder release pin while using it to remove the ignition lock cylinder. Begin the lock cylinder installation by reversing all steps from removal before testing that the ignition switch lock cylinder functions properly.

OEM Ford Mustang Ignition Lock Cylinder

Ignition Key Lock Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Ignition Lock Cylinders found

View related parts
Ford Mustang Ignition Lock Cylinder Part Number: 1L3Z-11582-A
$59.56 MSRP: $98.00
You Save: $38.44 (40%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Lock Assembly - Steering And Ignition; Trunk Lock Cylinder; Door Lock Cylinder; Ignition Cylinder; Lock & Cylinder; Lock Cylinder; Switch Assembly; Cylinder & Keys; Warning Switch
- Replaces: 1L3Z-11582-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1996-2004 Ford Mustang | Base, GT, GT Bullitt, Mach 1, SVT Cobra, SVT Cobra 10th Anniversary | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS
View related parts
Ford Mustang Ignition Lock Cylinder, Front Part Number: AU5Z-11582-B
$84.30 MSRP: $136.00
You Save: $51.70 (39%)
ADD TO CART
Product Specifications
- Other Name: Cylinder - Ignition; Console Lock Cylinder and Key; Ignition Lock Cylinder, Front; Ignition Cylinder; Lock & Cylinder; Lock Cylinder; Cylinder & Keys; Cylinder Ignition
- Position: Front
- Replaces: SW-6845, SW-6606, SW-6149, 5F9Z-11582-BA, 4L3Z-11582-BB, 7U5Z-11582-B, SW-6390
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2014 Ford Mustang | Base, Boss 302, Bullitt, GT, Shelby GT, Shelby GT500, Shelby GT500KR | 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 5.8 L GAS
View related parts
Ford Mustang Steering Lock Part Number: AA8Z-3F527-A
$242.21 MSRP: $355.67
You Save: $113.46 (32%)
ADD TO CART
Product Specifications
- Other Name: Lock Assembly - Steering And Ignition; Steering Column Lock; Lock Assembly; Column Housing; Lock Housing; Column Assembly Housing; Housing; Lock
- Replaces: 5F9Z-3F527-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2014 Ford Mustang | Base, Boss 302, Bullitt, GT, Shelby GT, Shelby GT500, Shelby GT500KR | 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 5.8 L GAS
View related parts
Ford Mustang Ignition Lock Cylinder Part Number: F3DZ-11582-B
Product Specifications
- Other Name: Lockset - Complete Vehicle; Lock Cylinder
- Replaces: F1AZ-11582-B, F3AZ-11582-B, F1DZ-11582-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1994-1995 Ford Mustang | Base, GT, GTS, SVT Cobra | 6 Cyl 3.8 L GAS, 8 Cyl 5.0 L GAS
View related parts
Ford Mustang Ignition Lock Cylinder, Front Part Number: F3DZ-11582-A
Product Specifications
- Other Name: Lockset - Complete Vehicle; Door Lock Cylinder, Front; Ignition Cylinder; Lock Cylinder; Cylinder & Keys; Door Lock Cylinder
- Position: Front
- Replaces: F1DZ-11582-A, F1AZ-11582-A, F3AZ-11582-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1994-1995 Ford Mustang | Base, GT, GTS, SVT Cobra | 6 Cyl 3.8 L GAS, 8 Cyl 5.0 L GAS
View related parts
Ford Mustang Cylinder & Keys, Black Part Number: E7ZZ-6121984-B
Product Specifications
- Other Name: Lockset - Complete Vehicle; Trunk Lock Cylinder; Door Lock Cylinder; Key Blank
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1990-1992 Ford Mustang | GT, LX | 4 Cyl 2.3 L GAS, 8 Cyl 5.0 L GAS
View related parts
Ford Mustang Ignition Lock Cylinder, Black Part Number: E3DZ-11582-A
Product Specifications
- Other Name: Lock Cylinder With Keys; Cylinder & Keys
- Replaces: E9TZ-11582-A, E3AZ-11582-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1984-1993 Ford Mustang | GT, LX, SVO, SVT Cobra, SVT Cobra R | 4 Cyl 2.3 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.0 L GAS
View related parts
Ford Mustang Lock Cylinder Part Number: F4ZZ-6322050-A
Product Specifications
- Other Name: Lockset - Complete Vehicle; Ignition Lock Cylinder; Trunk Lock Cylinder; Door Lock Cylinder; Cylinder & Keys
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1994-1995 Ford Mustang | Base, GT, GTS, SVT Cobra | 6 Cyl 3.8 L GAS, 8 Cyl 5.0 L GAS

Ford Mustang Ignition Lock Cylinder

OEM Ignition Lock Cylinder boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Ignition Lock Cylinder with long life and a perfect fit. Come to our website and find genuine Ford Mustang parts. We keep a wide inventory of OEM Mustang parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

The Ignition Lock Cylinder plays an important part in the Ford Mustang's vehicle since it enables the driver to have an access to the key that starts the engine. This component can be directly associated with the ignition system that creates the required power to make the vehicle run. In case Ignition Lock Cylinder becomes defective, Mustang may not start, and staying stuck in 'On' position may result to immobilization or higher theft rate. Different types of Ignition Lock Cylinder have been used in the Ford Mustang cars over the years to improve on their security and usability. Such cylinders may contain a specific key and tumbler configuration, therefore, the initially started car can be driven only with the help of the correct key. Thus, the development of Ignition Lock Cylinder is attributed to the developments in automotive engineering, meaning that the Ford Mustang is more safe and reliable today than it was a few years ago.

Ford Mustang Ignition Lock Cylinder Parts and Q&A

Ignition Lock Cylinder, Front
AU5Z-11582-B
Q: How to Service and Repair the Ignition Lock Cylinder on Ford Mustang?
A:
You must detach the steering column cover and lower steering column shroud by their 3 screws to reach and work on the ignition lock cylinder. Turn the key to RUN position and push a small punch tool into the opening to take out the ignition lock cylinder. Put the ignition lock cylinder back in place by following the steps of removal then grease the cylinder when completed.
Ignition Lock Cylinder
1L3Z-11582-A
Q: How to Remove and Install an Ignition Lock Cylinder in a Steering Column on Ford Mustang?
A:
One must start the functional lock cylinder repair process by disconnecting the battery ground wire. Starting with the ignition key you should turn it to the RUN position to remove the Ignition Switch lock cylinder. A 1/8-inch drift needs application through the access hole to push the ignition switch lock cylinder release pin while using it to remove the ignition lock cylinder. Begin the lock cylinder installation by reversing all steps from removal before testing that the ignition switch lock cylinder functions properly.