How to service and repair the parking brake cable and conduit at the front on Ford Mustang?

Before servicing or repairing the front parking brake cable and conduit it is necessary to release cable tension since any work on brake system components or a rear axle housing removal requires this step. The first step involves disconnecting the parking brake rear cables and conduits after which the parking brake control nuts should be removed to separate the parking brake cable. Users should pull the front cable and equalizer through the floorpan after entering inside the vehicle. Install the device by performing the backward steps of removal.

How to remove and replace the rear parking brake cable on all on Ford Mustang?

All vehicles require a hoist for cable replacement work when positioned with the transmission in the neutral gear and when brake cable tension reaches zero point. The specification for convertible vehicles includes removing both rear support brace bolts followed by installing new ones which should be tightened to 63 Nm (46 lb-ft). The procedure starts with unbolting and discarding the upper support brace bolts before unbolting the front support brace bolts while you install replacement bolts that must get tightened to 63 Nm (46 lb-ft). At the equalizer detect the rear parking brake cable from the front cable before freeing it from the body bracket. The boot needs to be connected between conduit end fitting and strand end fitting while a clamp on the t-end fitting protects exposed strands which could result in brake drag or lock-up. To replace the brake caliper disconnect both the rear cable from its position on the caliper using tools to remove the retaining clip. For the installation replace the parking brake cable bracket bolt by tightening it to 27 Nm (20 lb-ft). The installation includes tightening the new lot to 20 Nm (177 lb-in) after placing it on the parking brake cable crossmember bracket bolt when working with the right-hand cable. The process ends by performing the reverse installation duties while adjusting the parking brake cable tension correctly.

OEM Ford Mustang Parking Brake Cable

Emergency Parking Brake Release Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

18 Parking Brake Cables found

View related parts
Ford Mustang Rear Cable, Passenger Side Part Number: F4ZZ-2A635-A
$21.21 MSRP: $29.34
You Save: $8.13 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly - Parking Brake; Brake Cable
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1994-1998 Ford Mustang | Base, GT, GTS, SVT Cobra | 6 Cyl 3.8 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L GAS
View related parts
Ford Mustang Rear Cable Part Number: FR3Z-2A635-M
$44.97 MSRP: $70.18
You Save: $25.21 (36%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly - Parking Brake; Brake Cable
- Replaces: BRCA-285, BRCA-102, FR3Z-2A635-J, BRCA-141, FR3Z-2A635-E, FR3Z-2A635-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2015-2023 Ford Mustang | EcoBoost, EcoBoost Premium, GT, GT Premium, Mach 1, Shelby GT350, Shelby GT350R, Shelby GT500 | 4 Cyl 2.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.2 L GAS
View related parts
Ford Mustang Rear Cable, Driver Side Part Number: FR3Z-2A635-K
$41.56 MSRP: $66.00
You Save: $24.44 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly - Parking Brake; Brake Cable
- Position: Driver Side
- Replaces: BRCA-142, FR3Z-2A635-B, BRCA-103, FR3Z-2A635-F
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2015-2023 Ford Mustang | EcoBoost, EcoBoost Premium, GT, GT Premium, Mach 1, Shelby GT350, Shelby GT350R, Shelby GT500 | 4 Cyl 2.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.2 L GAS
View related parts
Ford Mustang Rear Cable, Driver Side Part Number: BR3Z-2A635-B
$54.92 MSRP: $90.36
You Save: $35.44 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly - Parking Brake; Brake Cable
- Position: Driver Side
- Replaces: AR3Z-2A635-B, AR3Z-2A635-D
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2014 Ford Mustang | Base, Boss 302, Bullitt, GT, Shelby GT, Shelby GT500, Shelby GT500KR | 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 5.8 L GAS
View related parts
Ford Mustang Rear Cable, Passenger Side Part Number: AR3Z-2A635-C
$52.30 MSRP: $87.64
You Save: $35.34 (41%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly - Parking Brake; Brake Cable
- Position: Passenger Side
- Replaces: 9R3Z-2A635-A, AR3Z-2A635-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2010 Ford Mustang | Base, Bullitt, GT, Shelby GT, Shelby GT500, Shelby GT500KR | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
Ford Mustang Rear Cable, Passenger Side Part Number: DR3Z-2A635-B
$36.54 MSRP: $50.54
You Save: $14.00 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly - Parking Brake; Brake Cable
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2014 Ford Mustang | Base, GT, Shelby GT500 | 6 Cyl 3.7 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.8 L GAS
View related parts
Ford Mustang Rear Cable, Driver Side Part Number: BR3Z-2A635-C
$40.39 MSRP: $55.88
You Save: $15.49 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly - Parking Brake; Brake Cable
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2014 Ford Mustang | Base, GT, Shelby GT500 | 6 Cyl 3.7 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.8 L GAS
View related parts
Ford Mustang Rear Cable Part Number: FR3Z-2A635-L
$52.21 MSRP: $82.91
You Save: $30.70 (38%)
ADD TO CART
Product Specifications
- Other Name: Cable Assembly - Parking Brake; Brake Cable
- Replaces: FR3Z-2A635-C, FR3Z-2A635-G
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2015-2023 Ford Mustang | EcoBoost, EcoBoost Premium, GT, GT Premium, Mach 1, Shelby GT350, Shelby GT350R, Shelby GT500 | 4 Cyl 2.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.2 L GAS
View related parts
Ford Mustang Rear Cable, Driver Side Part Number: FR3Z-2A635-H
$46.13 MSRP: $72.00
You Save: $25.87 (36%)
ADD TO CART
Product Specifications
- Other Name: Cable Assembly - Parking Brake; Brake Cable
- Manufacturer Note: Service Part May Differ From Production
- Position: Driver Side
- Replaces: FR3Z-2A635-D
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2015-2023 Ford Mustang | EcoBoost, EcoBoost Premium, GT, GT Premium, Mach 1, Shelby GT350, Shelby GT350R, Shelby GT500 | 4 Cyl 2.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.2 L GAS
View related parts
Ford Mustang Rear Cable, Driver Side Part Number: F4ZZ-2A635-B
Product Specifications
- Other Name: Cable Assembly - Parking Brake; Brake Cable
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1994-1998 Ford Mustang | Base, GT, GTS, SVT Cobra | 6 Cyl 3.8 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L GAS
View related parts
Ford Mustang Front Cable Part Number: E7ZZ-2A603-A
Product Specifications
- Other Name: Cable Assembly - Parking Brake; Brake Cable
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1992-1993 Ford Mustang | GT, LX, SVT Cobra, SVT Cobra R | 4 Cyl 2.3 L GAS, 8 Cyl 5.0 L GAS
View related parts
Ford Mustang Front Cable Part Number: F4ZZ-2A603-A
Product Specifications
- Other Name: Cable Assembly - Parking Brake; Brake Cable
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1994-1998 Ford Mustang | Base, GT, GTS, SVT Cobra | 6 Cyl 3.8 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L GAS
View related parts
Ford Mustang Rear Cable Part Number: DR3Z-2A635-A
Product Specifications
- Other Name: Cable Assembly - Parking Brake; Brake Cable
- Replaces: BR3Z-2A635-A, BRCA-2
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2014 Ford Mustang | Base, Boss 302, GT, Shelby GT500 | 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 5.8 L GAS
View related parts
Ford Mustang Rear Cable, Driver Side Part Number: 3R3Z-2A635-BA
Product Specifications
- Other Name: Cable Assembly - Parking Brake; Brake Cable
- Position: Driver Side
- Replaces: 1R3Z-2A635-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1999-2004 Ford Mustang | Base, GT, GT Bullitt, Mach 1 | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS
View related parts
Ford Mustang Rear Cable, Passenger Side Part Number: 3R3Z-2A635-AA
Product Specifications
- Other Name: Cable Assembly - Parking Brake; Brake Cable
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2001-2004 Ford Mustang | Base, GT, GT Bullitt, Mach 1 | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS
View related parts
Ford Mustang Rear Cable, Passenger Side Part Number: 1R3Z-2A635-DA
Product Specifications
- Other Name: Cable Assembly - Parking Brake; Brake Cable
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2004, 2001 Ford Mustang | SVT Cobra | 8 Cyl 4.6 L GAS
View related parts
Ford Mustang Rear Cable, Driver Side Part Number: 1R3Z-2A635-CA
Product Specifications
- Other Name: Cable Assembly - Parking Brake; Brake Cable
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2004, 2001 Ford Mustang | SVT Cobra | 8 Cyl 4.6 L GAS
View related parts
Ford Mustang Front Cable Part Number: F9ZZ-2A603-BA
Product Specifications
- Other Name: Cable Assembly - Parking Brake; Brake Cable
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1999-2004 Ford Mustang | Base, GT, GT Bullitt, Mach 1, SVT Cobra, SVT Cobra 10th Anniversary | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS

Ford Mustang Parking Brake Cable

OEM Parking Brake Cable boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Parking Brake Cable with long life and a perfect fit. Come to our website and find genuine Ford Mustang parts. We keep a wide inventory of OEM Mustang parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

The Parking Brake Cable in the automobiles especially in the ford mustang cars is abbreviated as the parking brake cable or the emergency brake cable and this is a very important part of the car as far as the safety of the automobile is concerned. The Brake Cable connects the parking brake to the braking system: it holds the vehicle stationary when parked on slopes and additionally as an emergency braking system. It is required for the Brake Cable to be in the right operating condition and not worn or stretched that may lead to the brake not holding the vehicle securely. The signs associated with a faulty Brake Cable are the parking brake light on and the brake is also not working efficiently.

Ford Mustang Parking Brake Cable Parts and Q&A

Front Cable
F9ZZ-2A603-BA
Q: How to service and repair the parking brake cable and conduit at the front on Ford Mustang?
A:
Before servicing or repairing the front parking brake cable and conduit it is necessary to release cable tension since any work on brake system components or a rear axle housing removal requires this step. The first step involves disconnecting the parking brake rear cables and conduits after which the parking brake control nuts should be removed to separate the parking brake cable. Users should pull the front cable and equalizer through the floorpan after entering inside the vehicle. Install the device by performing the backward steps of removal.
Rear Cable, Driver Side
BR3Z-2A635-B
Q: How to remove and replace the rear parking brake cable on all on Ford Mustang?
A:
All vehicles require a hoist for cable replacement work when positioned with the transmission in the neutral gear and when brake cable tension reaches zero point. The specification for convertible vehicles includes removing both rear support brace bolts followed by installing new ones which should be tightened to 63 Nm (46 lb-ft). The procedure starts with unbolting and discarding the upper support brace bolts before unbolting the front support brace bolts while you install replacement bolts that must get tightened to 63 Nm (46 lb-ft). At the equalizer detect the rear parking brake cable from the front cable before freeing it from the body bracket. The boot needs to be connected between conduit end fitting and strand end fitting while a clamp on the t-end fitting protects exposed strands which could result in brake drag or lock-up. To replace the Brake Caliper disconnect both the rear cable from its position on the caliper using tools to remove the retaining clip. For the installation replace the parking brake cable bracket bolt by tightening it to 27 Nm (20 lb-ft). The installation includes tightening the new lot to 20 Nm (177 lb-in) after placing it on the parking brake cable crossmember bracket bolt when working with the right-hand cable. The process ends by performing the reverse installation duties while adjusting the parking brake cable tension correctly.