How to service and repair the battery cables on Ford Ranger?

Service and repair operations on battery cables should begin with the vehicle positioned on a hoist while in NEUTRAL gear along with battery disconnection. You should set aside the body ground terminal of the battery cable by removing its nut while applying 9 Nm (80 lb-in) torque when reinstalling it. Remove the battery cable connector from near the radiator support followed by disconnecting the three battery cable locators installed on the battery tray and fender. To repair the BJB terminal area remove its cover, unfasten the two nuts and safely set it aside while reinstallation requires 12 Nm (9 lb-ft) torque. The battery cable connector must be taken off from the fender well and the A/C compressor electrical connector only if present. The removal procedure includes taking off two cable locators from the A/C compressor before unthreading the battery cable engine bracket nut for installation while tightening to 25 Nm (18 lb-ft). Place the engine ground terminal of the battery cable aside by removing its nut then reinstall it after torqueing it to 27 Nm (20 lb-ft). First remove the starter solenoid terminal cover followed by removing the nut to set aside the battery cable starter solenoid terminal, reinstall it with a torque of 12 Nm (9 lb-ft). You should set aside the battery cable starter solenoid wire terminal after removing its nut. This terminal needs to be tightened at 5 Nm (44 lb-in) when reinstalling. Separate the battery cable locator from its generator bracket position then eliminate the two generator electric links. Place the generator B+ protective cover to the side while detaching the nut from the B+ terminal and securing the battery cable at 8 Nm (71 lb-in). When replacing the parts return every cable and component according to their original placement order.

OEM Ford Ranger Battery Cable

Car Battery Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

46 Battery Cables found

View related parts
Ford Ranger Cable Assembly
Part Number: 4L5Z-14300-DA
Product Specifications
- Other Name: Battery Cable Harness; Battery Cables
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2004-2005 Ford Ranger | Edge, STX, Tremor, XL, XLT | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Ford Ranger Cable Assembly
Part Number: 7L5Z-14300-BA
Product Specifications
- Other Name: Battery Cable Harness; Battery Cables
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2010 Ford Ranger | Sport, STX, XL, XLT | 4 Cyl 2.3 L GAS
View related parts
Ford Ranger Cable Assembly
Part Number: 7L5Z-14300-CA
Product Specifications
- Other Name: Battery Cable Harness; Battery Cables
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2008 Ford Ranger | Sport, STX, XL, XLT | 6 Cyl 3.0 L GAS
View related parts
Ford Ranger Cable Assembly
Part Number: 7L5Z-14300-DA
Product Specifications
- Other Name: Battery Cable Harness; Battery Cables
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2008 Ford Ranger | Sport, STX, XL, XLT | 6 Cyl 3.0 L GAS
View related parts
Ford Ranger Cable Assembly
Part Number: 7L5Z-14300-EA
Product Specifications
- Other Name: Battery Cable Harness; Battery Cables
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2009 Ford Ranger | FX4, Sport, STX, XL, XLT | 6 Cyl 4.0 L GAS
View related parts
Ford Ranger Cable Assembly
Part Number: AL5Z-14300-B
Product Specifications
- Other Name: Battery Cable Harness; Battery Cables
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2011 Ford Ranger | XL, XLT | 4 Cyl 2.3 L GAS
View related parts
Ford Ranger Cable Assembly
Part Number: AL5Z-14300-C
Product Specifications
- Other Name: Battery Cable Harness; Battery Cables
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2011 Ford Ranger | Sport, XL, XLT | 6 Cyl 4.0 L GAS
View related parts
Ford Ranger Positive Cable
Part Number: F37Z-14300-C
Product Specifications
- Other Name: Cable - Battery To Starter Motor; Battery Cables
- Manufacturer Note: FROM 9/93
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1993-1994 Ford Ranger | Splash, Sport, STX, XL, XLT
View related parts
Ford Ranger Cable Assembly
Part Number: FOTZ-14301-F
Product Specifications
- Other Name: Battery Cables; Ground Strap; Negative Cable
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1990-1992 Ford Ranger | Custom, S, S Plus, Sport, STX, XLT | 6 Cyl 2.9 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
Ford Ranger Cable Assembly
Part Number: 4L5Z-14300-AA
Product Specifications
- Other Name: Battery Cable Harness; Battery Cables
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2004-2005 Ford Ranger | XL, XLT | 4 Cyl 2.3 L GAS
View related parts
Ford Ranger Cable Assembly
Part Number: 4L5Z-14300-BA
Product Specifications
- Other Name: Battery Cable Harness; Battery Cables
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2004-2005 Ford Ranger | XL, XLT | 4 Cyl 2.3 L GAS
View related parts
Ford Ranger Cable Assembly
Part Number: 2L5Z-14300-EA
Product Specifications
- Other Name: Battery Cables
- Manufacturer Note: Complete assembly - inclueds positive & negative battery cables, alternator & starter motor cables, without A/C, FROM 11/28/2001
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003 Ford Ranger | XL, XLT | 4 Cyl 2.3 L GAS
View related parts
Ford Ranger Cable Assembly
Part Number: 4L5Z-14300-CA
Product Specifications
- Other Name: Battery Cable Harness; Battery Cables
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2004-2005 Ford Ranger | Edge, STX, Tremor, XL, XLT | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Ford Ranger Cable Assembly
Part Number: 4L5Z-14300-EA
Product Specifications
- Other Name: Battery Cable Harness; Battery Cables
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2004-2005 Ford Ranger | Edge, FX4, Tremor, XL, XLT | 6 Cyl 4.0 L GAS
View related parts
Ford Ranger Cable Assembly
Part Number: 4L5Z-14300-FB
Product Specifications
- Other Name: Battery Cable Harness; Battery Cables
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2004-2005 Ford Ranger | Edge, FX4, Tremor, XL, XLT | 6 Cyl 4.0 L GAS
View related parts
Ford Ranger Cable Assembly
Part Number: 6L5Z-14300-AA
Product Specifications
- Other Name: Battery Cable Harness; Battery Cables
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006 Ford Ranger | XL, XLT | 4 Cyl 2.3 L GAS
View related parts
Ford Ranger Cable Assembly
Part Number: 6L5Z-14300-BA
Product Specifications
- Other Name: Battery Cable Harness; Battery Cables
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006 Ford Ranger | XL, XLT | 4 Cyl 2.3 L GAS
View related parts
Ford Ranger Cable Assembly
Part Number: 6L5Z-14300-CA
Product Specifications
- Other Name: Battery Cable Harness; Battery Cables
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006 Ford Ranger | Sport, STX, XL, XLT | 6 Cyl 3.0 L GAS
View related parts
Ford Ranger Cable Assembly
Part Number: 6L5Z-14300-DA
Product Specifications
- Other Name: Battery Cable Harness; Battery Cables
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006 Ford Ranger | Sport, STX, XL, XLT | 6 Cyl 3.0 L GAS
View related parts
Ford Ranger Cable Assembly
Part Number: 6L5Z-14300-EA
Product Specifications
- Other Name: Battery Cable Harness; Battery Cables
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006 Ford Ranger | FX4, Sport, STX, XL, XLT | 6 Cyl 4.0 L GAS

| Page 1 of 3 |Next >

1-20 of 46 Results

Ford Ranger Battery Cable

Welcome to our website where you can discover high-quality, genuine Ford Ranger Battery Cable. We offer an extensive inventory of OEM Ford Ranger Battery Cable at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.

Ford Ranger Battery Cable Parts Questions & Experts Answers

Cable Assembly
6L5Z-14300-AA
Q: How to service and repair the battery cables on Ford Ranger?
A: Service and repair operations on battery cables should begin with the vehicle positioned on a hoist while in NEUTRAL gear along with battery disconnection. You should set aside the body ground terminal of the battery cable by removing its nut while applying 9 Nm (80 lb-in) torque when reinstalling it. Remove the battery cable connector from near the radiator support followed by disconnecting the three battery cable locators installed on the battery tray and fender. To repair the BJB terminal area remove its cover, unfasten the two nuts and safely set it aside while reinstallation requires 12 Nm (9 lb-ft) torque. The battery cable connector must be taken off from the fender well and the A/C compressor electrical connector only if present. The removal procedure includes taking off two cable locators from the A/C compressor before unthreading the battery cable engine bracket nut for installation while tightening to 25 Nm (18 lb-ft). Place the engine ground terminal of the battery cable aside by removing its nut then reinstall it after torqueing it to 27 Nm (20 lb-ft). First remove the starter solenoid terminal cover followed by removing the nut to set aside the battery cable starter solenoid terminal, reinstall it with a torque of 12 Nm (9 lb-ft). You should set aside the battery cable starter solenoid wire terminal after removing its nut. This terminal needs to be tightened at 5 Nm (44 lb-in) when reinstalling. Separate the battery cable locator from its generator bracket position then eliminate the two generator electric links. Place the generator B+ protective cover to the side while detaching the nut from the B+ terminal and securing the battery cable at 8 Nm (71 lb-in). When replacing the parts return every cable and component according to their original placement order.