OEM Ford Ranger Car Batteries

Ford Ranger Car Batteries Parts and Q&A

• Battery
  BXS-59
  Q: What Safety Precautions Should Be Observed When Servicing Car Batteries on Ford Ranger?

  A:

  The process of servicing battery equipment requires strict safety measures because batteries emit explosive gases that present danger to personal safety. Flames and sparks along with lighted substances must stay away from the battery area where you need to wear protective equipment including eye cover and arrange enough ventilation. The prevention of air bag deployment requires disconnecting the battery ground cable until back up power becomes depleted which should take at least one minute after all other auxiliary power systems are disconnected from the system. The correct method for lifting a battery includes either using a battery carrier or gripping opposite walls to prevent end-wall deformation which would lead to vent-cap acid release. A battery holds sulfuric acid components along with other corrosive materials making it essential to both store it away from children and protect it from contact with all body areas including eyes. You should constantly use eye protection when handling batteries because acid splashes are possible and in case of battery contact you should rinse the affected area under water for 15 minutes then consult a doctor. Getting in touch with a medical professional becomes essential when acid enters the body. An appropriate battery disconnection procedure starts with removing the ground cable then continuing with the positive Battery Cable. The reversed battery installation steps should be followed to complete the process. The vehicle may need driving to finish an adaptive strategy update because it shows abnormal driving indicators between disconnecting then reconnecting the battery.
• Battery
  BXT-59
  Q: What Precautions Should Be Taken When Handling Car Batteries and Working with Air Bag Systems to Prevent Injury on Ford Ranger?

  A:

  Personal injury risks from exploding battery gases require that users must eliminate fire sources and sparks from batteries while protecting their eyes and face and maintaining adequate airflow. Repairing or installing any front or side Air Bag supplemental restraint system (SRS) components along with working on components situated near front or side air bag sensors requires the complete depletion of back up power supply to eliminate deployment hazards and associated injuries. A successful depleting of back up power supply energy requires disconnecting the battery ground cable followed by waiting about one minute without auxiliary batteries and power supplies connected. To avoid damaging the vent caps through end wall pressure using a battery carrier or by lifting from opposite corners is essential. The sulfuric acid in batteries needs to remain unreachable from children and should never touch your skin eyes or clothing; in case of contact wash with water for 15 minutes before seeking medical help. The driver will face unusual behavior while driving after reconnecting the battery as the vehicle adapts its computational method which requires indicator flasher programming or reset procedures. The process for disconnecting the battery begins by taking off the ground cable followed by the positive Battery Cable. Installation requires performing the steps in the opposite order.