How to service and repair the heater core on Ford Taurus?

A heater core service or repair must start with conducting a pressure leak test for suspected leakages. Start by removing the instrument panel after which you should proceed with the right-side cowl vent screen removal. Take out the screws then the water shield before clamping off heater hoses and disconnecting them. Vehicle owners should take out the Remote Climate Control (RCC) module by first disconnecting its electrical connector then removing the two nuts along with disconnecting the vacuum harness followed by removing the two screws. All vehicles need continued steps that include removing screws and shield before disconnecting the temperature blend door actuator electrical connector while taking out the actuator and its screws. First detach the temperature blend door assist spring then gently remove the supplemental temperature blend lever shaft by depressing its tab to break free from the supplemental blend door before rotating off the supplemental blend door pivot shaft from its metal link. Begin by detaching the metal link from the temperature blend door pivot shaft before you remove the heat core cover by unscrewing it while rotating the pivot shaft and then removing the cover and its attached seal. You must extract the heater core after rotating the blend door pivot shaft from its place. Reverse the installation steps while lubricating coolant hoses with plain water if needed before refilling the cooling system.

OEM Ford Taurus Heater Core

HVAC Heater Core

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Heater Cores found

View related parts
Ford Taurus Evaporator Core, Front Part Number: DG1Z-19850-D
$310.88 MSRP: $498.00
You Save: $187.12 (38%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Evaporator Assembly; A/C Evaporator Core and Case; HVAC Unit Case; A/C Evaporator Repair Kit; Heater Core.; Evaporator Case; Case Assembly; A/C & Heater Assembly
- Position: Front
- Replaces: DG1Z-19850-C, DG1Z-19850-A, DG1Z-19850-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2019 Ford Taurus | Limited, SE, SEL, SHO | 4 Cyl 2.0 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
View related parts
Ford Taurus Heater Core Part Number: E6DZ18476A
$43.98 MSRP: $59.85
You Save: $15.87 (27%)
ADD TO CART
Product Specifications
- Other Name: Heater Assembly - Less Radiator; HVAC Heater Core
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1986-1991 Ford Taurus | GL, L, LX, MT5, SHO | 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS
View related parts
Ford Taurus Heater Core, Front Part Number: CG1Z-18476-B
$195.46 MSRP: $324.55
You Save: $129.09 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Radiator And Seal Assembly - Heater; HVAC Heater Core, Front; HVAC Heater Core
- Manufacturer Note: Includes Seal
- Position: Front
- Replaces: CG1Z-18476-A, HC-59
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2011-2019 Ford Taurus | Limited, SE, SEL, SHO | 4 Cyl 2.0 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
View related parts
Ford Taurus Heater Core Part Number: H2MZ-18476-A
Product Specifications
- Other Name: Heater Assembly - Less Radiator; HVAC Heater Core
- Replaces: F5OY-18476-A, HC-19, F8OZ-18476-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1995-2007 Ford Taurus | G, GL, LX, SE, SE Comfort, SEL, SES, SHO, SVG | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 3.4 L GAS
View related parts
Ford Taurus Evaporator Core, Front Part Number: CG1Z-19850-D
Product Specifications
- Other Name: Evaporator Assembly; A/C Evaporator Core and Case; HVAC Unit Case; Repair Kit; Heater Core.; Evaporator Case; Case Assembly; A/C & Heater Assembly
- Position: Front
- Replaces: BB5Z-19850-B, CG1Z-19850-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2011-2012 Ford Taurus | Limited, SE, SEL, SHO | 6 Cyl 3.5 L GAS
View related parts
Ford Taurus Heater Core Part Number: E9DZ-18476-A
Product Specifications
- Other Name: Heater Assembly - Less Radiator; HVAC Heater Core
- Manufacturer Note: CORE - ALUMINUM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1991-1995 Ford Taurus | GL, L, LX, SE, SHO | 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.8 L GAS
View related parts
Ford Taurus Heater Core, Front Part Number: AA5Z-18476-B
Product Specifications
- Other Name: Radiator And Seal Assembly - Heater; HVAC Heater Core, Front; HVAC Heater Core
- Manufacturer Note: Includes Seal
- Position: Front
- Replaces: HC-53, AA5Z-18476-A, 8G1Z-18476-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2011 Ford Taurus | Limited, SE, SEL, SHO | 6 Cyl 3.5 L GAS

Ford Taurus Heater Core

OEM Heater Core boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Heater Core with long life and a perfect fit. Come to our website and find genuine Ford Taurus parts. We keep a wide inventory of OEM Taurus parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

The Heater Core in the Ford Taurus automobiles is located within the climate control system and it performs operations of the radiator by transferring more heat generated in the car engine, to the cabin. Constructed using materials such as aluminium or brass, some of the constituents of the core extract hot coolant from the engine and utilize. fan to warm the cabin air. Some Heater Cores may have temperature control mechanisms such as valves or doors Depending on the style and detailing some advanced models have electromechanical actuators and thermistors for the purpose of dual climate control. This is readily seen in air-conditioned vehicles whereby the heater core also serves to dehumidify by reheating cooled air. Some of the common problems are blockage, leakage and rusting of the system, and the repair may extend to include the dashboard. Other methods of heating the air-cooled engines are available, but they are dangerous to use in comparison to the already mentioned techniques.

Ford Taurus Heater Core Parts and Q&A

Heater Core
H2MZ-18476-A
Q: How to service and repair the heater core on Ford Taurus?
A:
A heater core service or repair must start with conducting a pressure leak test for suspected leakages. Start by removing the instrument panel after which you should proceed with the right-side cowl vent screen removal. Take out the screws then the water shield before clamping off heater hoses and disconnecting them. Vehicle owners should take out the Remote Climate Control (RCC) module by first disconnecting its electrical connector then removing the two nuts along with disconnecting the vacuum harness followed by removing the two screws. All vehicles need continued steps that include removing screws and shield before disconnecting the temperature Blend Door Actuator electrical connector while taking out the actuator and its screws. First detach the temperature blend door assist spring then gently remove the supplemental temperature blend lever shaft by depressing its tab to break free from the supplemental blend door before rotating off the supplemental blend door pivot shaft from its metal link. Begin by detaching the metal link from the temperature blend door pivot shaft before you remove the heat core cover by unscrewing it while rotating the pivot shaft and then removing the cover and its attached seal. You must extract the heater core after rotating the blend door pivot shaft from its place. Reverse the installation steps while lubricating coolant hoses with plain water if needed before refilling the cooling system.