How to service and repair the ignition switch on Ford Taurus?

Service and repair operations on the ignition switch must begin by disabling the supplemental restraint system (SRS). The procedure requires removal of two lower screws from the instrument panel steering cover followed by removing the cover itself and installing both components tightly at 9 Nm (80 inch lbs). The service requires two bolt removals that secure the instrument panel steering column opening cover reinforcement before tightening them to 15 Nm (11 ft. lbs) for reinstallation. Disconnect the ignition switch electrical connector followed by removing two ignition switch screws while taking appropriate measures to tighten everything to 7 Nm (62 inch lbs) during installation. Conclude the procedure by reinstalling the supplemental restraint system (SRS) and perform all required power sequence.

OEM Ford Taurus Ignition Switch

Starter Ignition Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Ignition Switches found

View related parts
Ford Taurus Ignition Switch
Part Number: F4DZ-11572-B
$46.77 MSRP: $75.45
You Save: $28.68 (39%)
ADD TO CART
Product Specifications
- Other Name: Switch Assembly - Ignition
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1994-2007 Ford Taurus | G, GL, LX, SE, SE Comfort, SEL, SES, SHO, SVG | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 3.4 L GAS
View related parts
Ford Taurus Ignition Switch
Part Number: DG9Z-11572-A
$61.43 MSRP: $101.07
You Save: $39.64 (40%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Switch Assembly - Ignition; Ignition Starter Switch; Ignition Lock Cylinder
- Replaces: 98AZ-11572-A, YS4Z-11572-AC, SW-6343
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2019 Ford Taurus | Limited, SE, SEL, SHO | 4 Cyl 2.0 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
View related parts
Ford Taurus Ignition Switch
Part Number: E7DZ-11572-A
$9.66 MSRP: $13.37
You Save: $3.71 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly - Ignition
- Manufacturer Note: REFER TO GROUP 14A411 FOR MATING WIRE ASY.
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1986-1990 Ford Taurus | GL, L, LX, MT5, SHO | 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS
View related parts
Ford Taurus Ignition Switch
Part Number: CG1Z-12A145-A
$68.23 MSRP: $105.00
You Save: $36.77 (36%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch - Ignition Impulse Counter; Switch Assembly; Switch - Ignition Impulse Counting
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2019 Ford Taurus | Limited, SE, SEL, SHO | 4 Cyl 2.0 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
View related parts
Ford Taurus Ignition Switch
Part Number: AG1Z-12A145-A
Product Specifications
- Other Name: Switch - Ignition Impulse Counter; Switch - Ignition Impulse Counting
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2012 Ford Taurus | Limited, SE, SEL, SHO | 6 Cyl 3.5 L GAS

Ford Taurus Ignition Switch

Welcome to our website where you can discover high-quality, genuine Ford Taurus Ignition Switch. We offer an extensive inventory of OEM Ford Taurus Ignition Switch at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.

Ford Taurus Ignition Switch Parts Questions & Experts Answers

Ignition Switch
F4DZ-11572-B
Q: How to service and repair the ignition switch on Ford Taurus?
A: Service and repair operations on the ignition switch must begin by disabling the supplemental restraint system (SRS). The procedure requires removal of two lower screws from the instrument panel steering cover followed by removing the cover itself and installing both components tightly at 9 Nm (80 inch lbs). The service requires two bolt removals that secure the instrument panel steering column opening cover reinforcement before tightening them to 15 Nm (11 ft. lbs) for reinstallation. Disconnect the ignition switch electrical connector followed by removing two ignition switch screws while taking appropriate measures to tighten everything to 7 Nm (62 inch lbs) during installation. Conclude the procedure by reinstalling the supplemental restraint system (SRS) and perform all required power sequence.