How to service and repair the Windshield Washer Fluid Reservoir on Ford Taurus?

Starting the Windshield Washer Fluid Reservoir service and repair requires hoisting and neutral position of the vehicle. Before starting the service remove both RH front fender splash shield and lower splash shield when present. Service technicians should disconnect three electrical connectors: the windshield washer pump connector and the low washer fluid level sensor connector and the RH fog lamp connector when it exists. The product label contains vital cautions which demand immediate medical attention according to emergency protocols while MSDS provides supplementary guidance after reading these warnings. Failure to follow these instructions results in major personal harm. Before removal of the windshield washer fluid reservoir it is essential to drain the liquid then disconnect all washer pump hoses. Screw-fasteners must be removed from the windshield washer reservoir while you unmount the reservoir. Install the components at 7 Nm (62 lb-in) torque. Running the pump for windshield wipers and rear windows should be avoided before reservoir filling because it leads to early pump failure. The windshield washer installation process ends by substituting removal steps and adding windshield washer fluid to the reservoir.

OEM Ford Taurus Windshield Washer Fluid Reservoir

Windshield Washer Reservoir

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Windshield Washer Fluid Reservoirs found

View related parts
Ford Taurus Washer Reservoir Part Number: DA5Z-17618-D
$72.59 MSRP: $115.27
You Save: $42.68 (38%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Reservoir - Windshield Washer; Washer Fluid Reservoir; Windshield Washer Reservoir; Reservoir Assembly
- Replaces: DA5Z-17618-C, DA5Z-17618-B, DA5Z-17618-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2019 Ford Taurus | Limited, Police, SE, SEL, SHO | 2.0L L4, 3.5L V6, 3.7L V6, 4 Cyl 2.0 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
View related parts
Ford Taurus Washer Reservoir Part Number: 1F1Z-17618-AA
$135.79 MSRP: $187.85
You Save: $52.06 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Reservoir - Windshield Washer; Washer Fluid Reservoir; Windshield Washer Reservoir
- Manufacturer Note: Complete Assembly
- Replaces: F7DZ-17618-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1997-2007 Ford Taurus | G, GL, LX, SE, SE Comfort, SEL, SES, SHO, SVG | 3.0L V6, 3.4L V8, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 8 Cyl 3.4 L GAS
View related parts
Ford Taurus Washer Reservoir Part Number: 8A5Z-17618-A
Product Specifications
- Other Name: Reservoir - Windshield Washer; Washer Fluid Reservoir; Windshield Washer Reservoir; Reservoir Assembly
- Replaces: 8G1Z-17618-B, 8G1Z-17618-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2013 Ford Taurus | Base, Deluxe, Limited, SE, SEL, SHO | 3.5L V6, 4 Cyl 2.0 L GAS, 6 Cyl 3.5 L GAS
View related parts
Ford Taurus Washer Reservoir Part Number: 6F1Z-17618-A
Product Specifications
- Other Name: Reservoir - Windshield; Washer Fluid Reservoir; Windshield Washer Reservoir
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2002-2005 Ford Taurus | SE, SE Comfort, SEL | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Ford Taurus Washer Reservoir Part Number: F7DZ-17618-BA
Product Specifications
- Other Name: Reservoir - Windshield; Windshield Washer Reservoir; Reservoir - Windshield Washer
- Manufacturer Note: w/low fluid sensor
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1997-1999 Ford Taurus | G, GL, LX, SE, SE Comfort, SHO | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 8 Cyl 3.4 L GAS
View related parts
Ford Taurus Washer Reservoir Part Number: F6DZ17618C
Product Specifications
- Other Name: Reservoir - Windshield; Washer Fluid Reservoir; Windshield Washer Reservoir; Reservoir; Reservoir - Windshield Washer
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1996-2001 Ford Taurus | GL, LX, SE, SE Comfort | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Ford Taurus Washer Reservoir Part Number: F6DZ17618A
Product Specifications
- Other Name: Reservoir - Windshield Washer; Windshield Washer Reservoir
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1996 Ford Taurus | G, GL, LX, SHO | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 8 Cyl 3.4 L GAS
View related parts
Ford Taurus Reservoir Tank Part Number: E6DZ17618B
Product Specifications
- Other Name: Reservoir - Water; Windshield Washer Reservoir; Coolant Reservoir; Washer Reservoir
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1986-1989 Ford Taurus | GL, L, LX, MT5, SHO | 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS

Ford Taurus Windshield Washer Fluid Reservoir

OEM Windshield Washer Fluid Reservoir boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Windshield Washer Fluid Reservoir with long life and a perfect fit. Come to our website and find genuine Ford Taurus parts. We keep a wide inventory of OEM Taurus parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

Ford Taurus Windshield Washer Fluid Reservoir Parts and Q&A

Washer Reservoir
8A5Z-17618-A
Q: How to service and repair the Windshield Washer Fluid Reservoir on Ford Taurus?
A:
Starting the Windshield Washer Fluid Reservoir service and repair requires hoisting and neutral position of the vehicle. Before starting the service remove both RH front fender splash shield and lower splash shield when present. Service technicians should disconnect three electrical connectors: the Windshield Washer Pump connector and the low washer fluid level sensor connector and the RH fog lamp connector when it exists. The product label contains vital cautions which demand immediate medical attention according to emergency protocols while MSDS provides supplementary guidance after reading these warnings. Failure to follow these instructions results in major personal harm. Before removal of the windshield washer fluid reservoir it is essential to drain the liquid then disconnect all washer pump hoses. Screw-fasteners must be removed from the windshield washer reservoir while you unmount the reservoir. Install the components at 7 Nm (62 lb-in) torque. Running the pump for windshield wipers and rear windows should be avoided before reservoir filling because it leads to early pump failure. The windshield washer installation process ends by substituting removal steps and adding windshield washer fluid to the reservoir.