How to service and repair the antenna cable for satellite radio in both wagon and sedan on Ford Taurus X?

Service and repair procedures for satellite radio antenna cables in wagon and sedan models start with removing right-hand wagon quarter trim panels together with sedan left-hand luggage compartment trim panels followed by both C-pillar and both D-pillar trim panel removal on all vehicles. You must disconnect the satellite radio antenna cable from the electrical connector which belongs to the Satellite Digital Audio Receiver System (SDARS) module. To access the satellite antenna move the lower part of the headliner with caution before you detach the satellite radio antenna cable bolt and remove the cable. Follow the installation steps by tightening the bolt to 7 Nm (62 lb-in) and use the same uninstallation procedure to finish installation.

OEM Ford Taurus X Antenna Cable

Radio Antenna Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Antenna Cables found

View related parts
Ford Taurus X Antenna Cable, Front
Part Number: 8G1Z-18812-A
Product Specifications
- Other Name: Cable Assembly - Extension; Antenna Cable, Front
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2009 Ford Taurus X | Eddie Bauer, Limited, SEL | 6 Cyl 3.5 L GAS
View related parts
Ford Taurus X Antenna Cable, Rear
Part Number: 8F9Z-18812-D
Product Specifications
- Other Name: Cable Assembly - Extension; Antenna Cable, Rear
- Manufacturer Note: Connects To Antenna Base Assembly
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2009 Ford Taurus X | Eddie Bauer, Limited, SEL | 6 Cyl 3.5 L GAS
View related parts
Ford Taurus X Antenna Cable
Part Number: 8A4Z-18812-A
Product Specifications
- Other Name: Cable Assembly - Extension
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2009 Ford Taurus X | Eddie Bauer, Limited, SEL | 6 Cyl 3.5 L GAS
View related parts
Ford Taurus X Antenna Cable, Rear
Part Number: 8F9Z-18812-E
Product Specifications
- Other Name: Cable Assembly - Extension; Antenna Cable, Rear
- Manufacturer Note: Connects To Antenna Base Assembly
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2009 Ford Taurus X | Eddie Bauer, Limited, SEL | 6 Cyl 3.5 L GAS

Ford Taurus X Antenna Cable

Welcome to our website where you can discover high-quality, genuine Ford Taurus X Antenna Cable. We offer an extensive inventory of OEM Ford Taurus X Antenna Cable at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.

Ford Taurus X Antenna Cable Parts Questions & Experts Answers

Antenna Cable, Front
8G1Z-18812-A
Q: How to service and repair the antenna cable for satellite radio in both wagon and sedan on Ford Taurus X?
A: Service and repair procedures for satellite radio antenna cables in wagon and sedan models start with removing right-hand wagon quarter trim panels together with sedan left-hand luggage compartment trim panels followed by both C-pillar and both D-pillar trim panel removal on all vehicles. You must disconnect the satellite radio antenna cable from the electrical connector which belongs to the Satellite Digital Audio Receiver System (SDARS) module. To access the satellite antenna move the lower part of the headliner with caution before you detach the satellite radio antenna cable bolt and remove the cable. Follow the installation steps by tightening the bolt to 7 Nm (62 lb-in) and use the same uninstallation procedure to finish installation.