FordParts
My Garage
My Account
Cart
OEM Ford Taurus X Seat Cushion
Seat Pad Cushion- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
12 Seat Cushions found
Ford Taurus X Seat Back Pad, Front Passenger Side
Part Number: 5F9Z-7464810-DA$32.88 MSRP: $45.49You Save: $12.61 (28%)Ships in 1-2 Business Days
Ford Taurus X Seat Cushion Pad, Rear Center Driver Side
Part Number: 5F9Z-7463841-BA$23.39 MSRP: $32.36You Save: $8.97 (28%)Ships in 1-2 Business Days
Ford Taurus X Seat Cushion Pad, Rear Center Passenger Side
Part Number: 5F9Z-7463840-AA$27.67 MSRP: $38.27You Save: $10.60 (28%)Ships in 1-2 Business Days
Ford Taurus X Seat Cushion Pad, Rear
Part Number: 6F9Z-7463841-A
Ford Taurus X Seat Cushion
Welcome to our website where you can discover high-quality, genuine Ford Taurus X Seat Cushion. We offer an extensive inventory of OEM Ford Taurus X Seat Cushion at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.
Ford Taurus X Seat Cushion Parts Questions & Experts Answers
- Q: How to service the second-row, 40 percent seat cushion on Ford Taurus X?A: Service of the Taurus X second-row 40 percent seat cushion begins with removal of both the 40 percent rear seat and rear seat backrest. First secure the inboard latch foot to make the backrest pivot up. To begin the cushion service, remove the J-clip located under the seat and then access the J-clip below from underneath to separate the cushion pad from its frame. Extract the retainers of the cushion trim cover starting from the edge between the riser/seat track and cushion frame and subsequently remove the cushion foam pan together with the cushion trim cover. To disarm the riser/seat track outboard inner, first dispose of the two screws before eliminating the outer outboard cover by taking out its three screws. The recliner operation requires removing the manual recliner handle screw and the two screws to detach the recliner outer cover but ensure the release strap passes through the cover opening before reassembly. Disassemble the recliner inner cover by first removing the pin-type retainer followed by releasing the locator tabs while being mindful to handle the system which contains quick-folding springs that generate a potential injury risk. Pull out the two cables from the recliner and direct them toward the seat cushion framework. Your installation of these recliner bolts requires detaching them first then tightening them to 50 Nm (37 lb-ft). To remove the riser/seat track you need to unscrew the six cushion frame-to-riser/seat track nuts before tightness them to 23 Nm (17 lb-ft). Position the safety belt buckle bolt then tighten it to 37 Nm (27 lb-ft) before putting on the screw and inboard pivot cover and pivot grommet and finally the two screws for the riser inboard inner cover and the three screws for the riser inboard outer cover. The last step requires removing the cushion trim cover from the cushion foam pad before performing all steps in reverse order to reassemble the product.
Related Ford Taurus X Parts
Ford Taurus X Car Speakers
Ford Taurus X Floor Pan
Ford Taurus X Front Door Striker
Ford Taurus X Fuel Filler Housing
Ford Taurus X Mirror Cover
Ford Taurus X Rear Crossmember
Ford Taurus X Seat Cover
Ford Taurus X Seat Heater
Ford Taurus X Seat Motor
Ford Taurus X Seat Switch
Ford Taurus X Trunk Lid Lift Support
Ford Taurus X Window Run