MKZ | 2017-2020 | Base, Black Label, Black Label Hybrid, Hybrid, Premiere, Premiere Hybrid, Reserve, Reserve Hybrid, Reserve I, Reserve I Hybrid, Reserve II, Reserve II Hybrid, Select, Select Hybrid | 4 Cyl 2.0 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.0 L GAS, 6 Cyl 3.0 L GAS
MKZ | 2017-2020 | Base, Black Label, Black Label Hybrid, Hybrid, Premiere, Premiere Hybrid, Reserve, Reserve Hybrid, Reserve I, Reserve I Hybrid, Reserve II, Reserve II Hybrid, Select, Select Hybrid | 4 Cyl 2.0 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.0 L GAS, 6 Cyl 3.0 L GAS
MKZ | 2017-2020 | Base, Black Label, Black Label Hybrid, Hybrid, Premiere, Premiere Hybrid, Reserve, Reserve Hybrid, Reserve I, Reserve I Hybrid, Reserve II, Reserve II Hybrid, Select, Select Hybrid | 4 Cyl 2.0 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.0 L GAS, 6 Cyl 3.0 L GAS
MKZ | 2017-2020 | Base, Black Label, Black Label Hybrid, Hybrid, Premiere, Premiere Hybrid, Reserve, Reserve Hybrid, Reserve I, Reserve I Hybrid, Reserve II, Reserve II Hybrid, Select, Select Hybrid | 4 Cyl 2.0 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.0 L GAS, 6 Cyl 3.0 L GAS
Q: How to Address Issues with the HVAC Control Module in a Lincoln Navigator?
A: The servicing of Heating Ventilation Air Conditioning (HVAC) Module starts with the removal of the center instrument panel finish panel. Start by unscrewing the four screws which secure the HVAC module before removing this unit from its place. The installation process for the new module matches the steps of removal in reverse order.
Q: How to Address Issues with the HVAC Control Module in a Lincoln Continental?
A: Service and repairs on the Control Module HVAC start by removing the instrument panel insulator by unscrewing pushpins then disconnecting the courtesy light. The first step requires removal of the vacuum harness connector followed by placement of the disconnected piece aside. Detach the wiring harness connector of the A/C blower motor speed control then unscrew its screws. Completion of the service and repair of Control Module HVAC requires that all mounting brackets get removed. Installation can be performed by executing the opposite steps of removal.
Q: How to service and repair the HVAC control module on Lincoln Town Car?
A: Maintenance of the HVAC control module requires service workers to drain the engine cooling system first. The vacuum hoses and wire harness connector need to be removed from the evaporative emission canister purge valve which has part number 9C915. First remove and then disconnect the nut and nuts used for securing the evaporative emission canister purge valve before pulling out the valve itself. After loosening the heater hose clamps the heater hoses can be disconnected from the heater core while the heater hose can be removed by unclipping its clamp. The wire harness connector needs to disconnect next while removing the nut along with the stud. To remove the motor speed control perform screw removal. Installation requires following the reversal of removal steps while cleaning coolant hoses with MERPOL ESE-M99B144-B (Coolant Hose Lubricant) or plain water according to need. Finish the process by adding coolant to the correct amount.