Other Name: Valve Assembly - Evaporator Expansion; A/C Expansion Valve
Replaces: DG9Z-19849-A
Fits the following Lincoln Models:
Continental | 2017-2020 | 80th Anniversary Coach Door Edition, Base, Black Label, Coach Door Edition, Livery, Premiere, Reserve, Select | 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.7 L GAS
MKX | 2016-2018 | Black Label, Premiere, Reserve, Select | 6 Cyl 2.7 L GAS, 6 Cyl 3.7 L GAS
MKZ | 2013-2020 | Base, Black Label, Black Label Hybrid, Hybrid, Premiere, Premiere Hybrid, Reserve, Reserve Hybrid, Reserve I, Reserve I Hybrid, Reserve II, Reserve II Hybrid, Select, Select Hybrid | 4 Cyl 2.0 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.0 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.7 L GAS
Nautilus | 2019-2023 | Base, Black Label, Reserve, Select | 4 Cyl 2.0 L GAS, 6 Cyl 2.7 L GAS
Aviator | 2020-2023 | Base, Black Label, Black Label Grand Touring, Grand Touring, Livery, Reserve | 6 Cyl 3.0 L GAS, 6 Cyl 3.0 L PLUG-IN HYBRID EV-GAS (PHEV)
Corsair | 2020-2023 | Base, Grand Touring, Reserve | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L PLUG-IN HYBRID EV-GAS (PHEV)
Aviator | 2020-2023 | Base, Black Label, Black Label Grand Touring, Grand Touring, Livery, Reserve | 6 Cyl 3.0 L GAS, 6 Cyl 3.0 L PLUG-IN HYBRID EV-GAS (PHEV)
Corsair | 2020-2023 | Base, Grand Touring, Reserve | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L PLUG-IN HYBRID EV-GAS (PHEV)
Q: How to Service and Repair the A/C Expansion Valve on Lincoln Aviator?
A: To repair the A/C expansion valve, recover the refrigerant, remove components in order, and install the new valve with clean PAG oil. Use new lubricated O-ring seals before reconnecting fittings. Finally, evacuate, leak test, and charge the system. Replace the receiver/drier only if contaminated by a failed compressor.
Q: How to Service the A/C Expansion Valve on Lincoln Navigator?
A: To service the A/C expansion valve on the Expedition EL and Navigator L, hoist the vehicle in neutral, recover refrigerant, and remove the outlet and inlet line fittings. Replace the A/C expansion valve with new O-rings and gaskets, tightening bolts to specified torque, then evacuate and charge the system.