How to service the front bumper cover on Lincoln LS?

The front bumper cover service requires you to remove screws and then proceed with taking out two inner fender splash shield screws along with six more screws from the inner fender splash shields. The service starts with disconnecting the two fog lamp electrical connectors and two sick marker lamp electrical connectors. Make the following moves to service the front bumper cover: First remove the four front bumper cover bracket bolts from the fenders followed by releasing the ambient air temperature sensor. Unfastening the radiator grille opening cover requires removing it from the top shelf of the bumper. The final step involves bumper cover removal by both pulling down on its center tabs while extending outboard tabs located on each side. The installation process of the new bumper cover begins with following the removal steps in reverse order.

How to service and repair the rear bumper cover on Lincoln LS?

Service and repair of the rear bumper cover requires engineers to start by taking out all screws along with four inner fender screws from both right-hand (RH) and left-hand (LH) sides. The rear bumper cover mounting bolt together with its wheelwell area nut must be removed from the RH side. A rear bumper cover bolt should be taken out during the LH side procedure. Start by removing the luggage compartment scuff plate after which you should take out the luggage compartment back and side panel trim. Enter the luggage compartment to take out each of the ten rear bumper cover nuts found on both sides. The reverse procedure applies when installing the new rear bumper cover after its removal.

OEM Lincoln LS Bumper Cover

Bumper Shell

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Bumper Covers found

View related parts
Lincoln LS Bumper Cover Part Number: XW4Z-17K835-BA
$355.51 MSRP: $487.76
You Save: $132.25 (28%)
ADD TO CART
Product Specifications
- Other Name: Cover
- Manufacturer Note: Without Holes For Bumper Impact Pad
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2001-2002 Lincoln LS | LSE | 6 Cyl 3.0 L GAS, 8 Cyl 3.9 L GAS
View related parts
Lincoln LS Bumper Cover Part Number: 6W4Z-17K835-FA
Product Specifications
- Other Name: Cover
- Replaces: 3W4Z-17K835-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2006 Lincoln LS | Appearance, Base, DEW98 High Version, LSE, Luxury, Premium, Sport, STD, Ultimate | 3.0L V6, 3.9L V8, 6 Cyl 3.0 L GAS, 8 Cyl 3.9 L GAS
View related parts
Lincoln LS Bumper Cover Part Number: 6W4Z-17K835-EA
Product Specifications
- Other Name: Cover
- Replaces: 3W4Z-17K835-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2006 Lincoln LS | Appearance, Base, DEW98 High Version, LSE, Luxury, Premium, Sport, STD, Ultimate | 3.0L V6, 3.9L V8, 6 Cyl 3.0 L GAS, 8 Cyl 3.9 L GAS
View related parts
Lincoln LS Bumper Cover, Front Part Number: 4W4Z-17D957-AAB
Product Specifications
- Other Name: Bumper Assembly - Front
- Manufacturer Note: Paint to match
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2004-2006 Lincoln LS | Appearance, Base, Luxury, Premium, Sport, Ultimate | 6 Cyl 3.0 L GAS, 8 Cyl 3.9 L GAS
View related parts
Lincoln LS Bumper Cover Part Number: 6W4Z-17D957-A
Product Specifications
- Other Name: Cover
- Replaces: 3W4Z-17D957-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2005 Lincoln LS | Base, DEW98 High Version, STD | 3.0L V6, 3.9L V8, 6 Cyl 3.0 L GAS, 8 Cyl 3.9 L GAS
View related parts
Lincoln LS Bumper Cover Part Number: XW4Z-17K835-AA
Product Specifications
- Other Name: Cover
- Manufacturer Note: With Holes For Bumper Impact Pad
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2000-2002 Lincoln LS | Base | 6 Cyl 3.0 L GAS, 8 Cyl 3.9 L GAS
View related parts
Lincoln LS Bumper Cover Part Number: XW4Z-17D957-BA
Product Specifications
- Other Name: Cover
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2001 Lincoln LS | LSE | 6 Cyl 3.0 L GAS, 8 Cyl 3.9 L GAS
View related parts
Lincoln LS Bumper Cover Part Number: XW4Z-17D957-AA
Product Specifications
- Other Name: Cover
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2000-2002 Lincoln LS | Base | 6 Cyl 3.0 L GAS, 8 Cyl 3.9 L GAS
View related parts
Lincoln LS Bumper Cover, Front Part Number: 2W4Z-17D957-AAA
Product Specifications
- Other Name: Bumper Assembly - Front
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2002-2003 Lincoln LS | LSE | 6 Cyl 3.0 L GAS, 8 Cyl 3.9 L GAS

Lincoln LS Bumper Cover

OEM Bumper Cover boasts unmatched quality. Each part goes through full quality checks. They adhere to Lincoln's official factory standards. These steps remove flaws and inconsistencies. So you can get Bumper Cover with long life and a perfect fit. Come to our website and find genuine Lincoln LS parts. We keep a wide inventory of OEM LS parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

The Lincoln LS Bumper Cover is an outer panel that conceals the structural bumper to improve appearance and airflow. The Bumper Cover is made from a flexible yet strong material that absorbs the blow from minor impacts on the LS. The flexible material absorbs the impact and reduces the shock transmitted to the important parts inside the vehicle. By providing a smooth surface on the front or back of the Lincoln LS, the Bumper Cover helps orient air cleanly around the vehicle, an attribute that can benefit speed and fuel economy. The Bumper Cover will also have molded sections with openings through which air will flow to the radiator and other heat exchangers and in the case of Bumper Covers for special equipment vehicles or bumpers with fog lights, the fog lights, parking lights, turn signals, and license plates. All of these openings along with the unused cavity will be sealed with small covers so that style will be consistent. If the tow eye anchor point is not applied, an access cap can mask its appearance, making the exterior neater. Replacing your damaged Bumper Cover will restore your Lincoln LS's protective function and factory look. As a result, your Lincoln will be able to maintain its safety and style without altering any surrounding assembly.

Lincoln LS Bumper Cover Parts and Q&A

Bumper Cover, Front
2W4Z-17D957-AAA
Q: How to service the front bumper cover on Lincoln LS?
A:
The front bumper cover service requires you to remove screws and then proceed with taking out two inner fender splash shield screws along with six more screws from the inner fender splash shields. The service starts with disconnecting the two fog lamp electrical connectors and two sick marker lamp electrical connectors. Make the following moves to service the front bumper cover: First remove the four front bumper cover bracket bolts from the fenders followed by releasing the ambient air temperature sensor. Unfastening the radiator grille opening cover requires removing it from the top shelf of the bumper. The final step involves bumper cover removal by both pulling down on its center tabs while extending outboard tabs located on each side. The installation process of the new bumper cover begins with following the removal steps in reverse order.
Bumper Cover
XW4Z-17K835-AA
Q: How to service and repair the rear bumper cover on Lincoln LS?
A:
Service and repair of the rear bumper cover requires engineers to start by taking out all screws along with four inner fender screws from both right-hand (RH) and left-hand (LH) sides. The rear bumper cover mounting bolt together with its wheelwell area nut must be removed from the RH side. A rear bumper cover bolt should be taken out during the LH side procedure. Start by removing the luggage compartment scuff plate after which you should take out the luggage compartment back and side panel trim. Enter the luggage compartment to take out each of the ten rear bumper cover nuts found on both sides. The reverse procedure applies when installing the new rear bumper cover after its removal.