How to Service and Repair the Motor and Transmission Mount on Lincoln Mark LT?

Begin the transmission mount servicing and repair work by placing the vehicle in neutral position on a hoist. The first step involves removing both transfer case skid plate and exhaust hanger bolts when needed. Install a transmission jack before removing rear transmission insulator nuts then proceed with their installation. A slight transmission lift allows the removal of bolts which exposes the rear transmission insulator for extraction. The new transmission insulator needs to be positioned with bolts followed by torquing them to 80 Nm (59 ft. lbs.). Position the transmission onto the crossmember and fasten the nuts before tightening them to 103 Nm (76 ft. lbs.). Reinstall the exhaust hanger mounting bolts onto the crossmember before securing them with torque at 40 Nm (30 ft. lbs.). Connect the transfer case skid plate only if present and tighten it to 48 Nm (35 ft. lbs.).

OEM Lincoln Mark LT Motor And Transmission Mount

Motor and Trans Mount

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Motor And Transmission Mounts found

View related parts
Lincoln Mark LT Transmission Mount Part Number: 4L3Z-6068-A
$145.42 MSRP: $211.67
You Save: $66.25 (32%)
ADD TO CART
Product Specifications
- Other Name: Insulator Assembly - Engine Support; Automatic Transmission Mount; Engine Mount Bracket; Transfer Case Mount.; Rear Mount
- Replaces: 4L3Z-6068-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2008 Lincoln Mark LT | Base | 8 Cyl 5.4 L GAS
View related parts
Lincoln Mark LT Motor Mount, Passenger Side Part Number: 7L3Z-6038-DA
Product Specifications
- Other Name: Insulator Assembly; Engine Mount, Right; Engine Mount Bracket; Front Mount
- Position: Passenger Side
- Replaces: 5L3Z-6038-HB, 7L3Z-6038-BB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2008 Lincoln Mark LT | Base | 8 Cyl 5.4 L GAS
View related parts
Lincoln Mark LT Motor Mount, Driver Side Part Number: 7L3Z-6038-D
Product Specifications
- Other Name: Insulator Assembly - Engine Support; Engine Mount, Left; Engine Mount Bracket; Front Mount
- Position: Driver Side
- Replaces: 7L3Z-6038-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2008 Lincoln Mark LT | Base | 8 Cyl 5.4 L GAS
View related parts
Lincoln Mark LT Trans Crossmember Part Number: 6L3Z-6A023-A
Product Specifications
- Other Name: Support; Transmission Crossmember
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2008 Lincoln Mark LT | Base | 8 Cyl 5.4 L GAS
View related parts
Lincoln Mark LT Front Mount, Driver Side Part Number: 5L3Z-6038-HA
Product Specifications
- Other Name: Insulator Assembly - Engine; Engine Mount Bracket; Motor Mount; Insulator Assembly - Engine Support
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006 Lincoln Mark LT | Base | 8 Cyl 5.4 L GAS
View related parts
Lincoln Mark LT Transmission Mount Part Number: 4L3Z-6068-AA
Product Specifications
- Other Name: Insulator Assembly - Engine Support; Manual Transmission Mount; Engine Mount Bracket; Transfer Case Mount; Motor Mount; Rear Mount
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2008 Lincoln Mark LT | Base | 8 Cyl 5.4 L GAS

Lincoln Mark LT Motor And Transmission Mount

OEM Motor And Transmission Mount boasts unmatched quality. Each part goes through full quality checks. They adhere to Lincoln's official factory standards. These steps remove flaws and inconsistencies. So you can get Motor And Transmission Mount with long life and a perfect fit. Come to our website and find genuine Lincoln Mark LT parts. We keep a wide inventory of OEM Mark LT parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

The Motor And Transmission Mount is a very important part that defines the durability and the power of the Lincoln Mark LT luxury pickup truck. Being a Motor And Transmission Mount that has been specially fitted for the purpose of supporting the transmission then securely to transfer its power, this mount also protects it from the vibrations of the engine, thus improving the smoothness of the ride. Lincoln Mark LT was launched in the year 2005 and supports several models so Motor And Transmission Mount is part of those vehicles' design. Through safe positioning to reduce vibration and achieving operational equilibrium, the Motor And Transmission Mount supports the capability and the reliability of the Lincoln Mark LT and unleashes the full power of the 5.4L Triton V8 engine. This mount not only enhance the performance of the vehicle but also very much improve the comfort of passengers by reducing vibration pass through. Out there in the automotive market, the Motor And Transmission Mount is uniquely constructed and designed to meet the needs of enthusiasts of luxury trucks. Since the Lincoln Mark LT can be fitted with rear wheel drive and also all wheel drive, the Motor And Transmission Mount is an important component of the entire Lincoln Mark LT operation. All in all, the Motor And Transmission Mount is a clear manifestation of the Lincoln Mark LT's standards of quality focusing on the comfort and security of the Lincoln Mark LT users.

Lincoln Mark LT Motor And Transmission Mount Parts and Q&A

Transmission Mount
4L3Z-6068-A
Q: How to Service and Repair the Motor and Transmission Mount on Lincoln Mark LT?
A:
Begin the transmission mount servicing and repair work by placing the vehicle in neutral position on a hoist. The first step involves removing both transfer case skid plate and exhaust hanger bolts when needed. Install a transmission jack before removing rear transmission insulator nuts then proceed with their installation. A slight transmission lift allows the removal of bolts which exposes the rear transmission insulator for extraction. The new transmission insulator needs to be positioned with bolts followed by torquing them to 80 Nm (59 ft. lbs.). Position the transmission onto the crossmember and fasten the nuts before tightening them to 103 Nm (76 ft. lbs.). Reinstall the exhaust hanger mounting bolts onto the crossmember before securing them with torque at 40 Nm (30 ft. lbs.). Connect the transfer case skid plate only if present and tighten it to 48 Nm (35 ft. lbs.).