Begin rear brake disc replacement by taking off the wheel together with its tire. It is essential to remove the
Brake Caliper and anchor plate assembly from the brake hose because they should never dangle. Instead, use mechanic's wire to secure the assembly together while you remove the two brake caliper anchor plate bolts. Next, remove the brake disc. Install the brake disc after cleaning and drying its mounting surface at the hub while also applying anti-seize lubricant if instructed. Fasten the brake disc onto the wheel hub followed by reinstallation of the brake caliper and anchor plate assembly and bolted installation of the two brake caliper anchor plate bolts with a torque setting of 90 Nm (66 lb-ft). Reinstall the wheel together with tire before performing brake application several times to verify correct operation.