How to Remove and Replace the Flywheel on Lincoln MKX?

In order to replace flexplate, make sure that the vehicle is in neutral and on a hoist. Take out the transaxle, observe the offset hole, so you can install it correctly. When the bolts are removed, remove the flexplate. Installation to be reinstalled with tightening bolts of 80 Nm (59 lb-ft) and re-follow the installation steps.

OEM Lincoln MKX Flywheel

Clutch Flywheel

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Flywheels found

View related parts
Lincoln MKX Drive Plate Part Number: 7T4Z-6375-AA
$52.28 MSRP: $78.28
You Save: $26.00 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Flywheel Assembly; Automatic Transmission Flexplate; Flywheel
- Manufacturer Note: 3 Bolt Converter
- Replaces: AA5Z-7000-B, AA5Z-7000-D
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2018 Lincoln MKX | Base, Black Label, Premiere, Reserve, Select | 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L GAS
View related parts
Lincoln MKX Drive Plate Part Number: FG9Z-6375-A
$62.60 MSRP: $91.12
You Save: $28.52 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Flywheel Assembly; Flywheel
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2016-2018 Lincoln MKX | Black Label, Premiere, Reserve, Select | 6 Cyl 2.7 L GAS

Lincoln MKX Flywheel

Welcome to our website where you can discover high-quality, genuine Lincoln MKX Flywheel. We offer an extensive inventory of OEM Lincoln MKX Flywheel at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.

Lincoln MKX Flywheel Parts and Q&A

Drive Plate
7T4Z-6375-AA
Q: How to Remove and Replace the Flywheel on Lincoln MKX?
A: In order to replace flexplate, make sure that the vehicle is in neutral and on a hoist. Take out the transaxle, observe the offset hole, so you can install it correctly. When the bolts are removed, remove the flexplate. Installation to be reinstalled with tightening bolts of 80 Nm (59 lb-ft) and re-follow the installation steps.