How to service the fuel level sensor safely and effectively on Lincoln MKZ?

Service of the fuel level sensor must begin with safety precautions such as preventing smoking and using open flames and personal electronic devices close to fuel components because these areas contain flammable mixtures. You must first drain fuel system pressure while disconnecting the ground cable from the battery. Rotate the fuel tank filler cap in the counterclockwise direction only a quarter turn then place it safely aside. The Fuel Draining Hose removal must involve slow hose movement to stop fitting detachment while proper funnel placement inside the fuel tank filler pipe until the fitting activates safety valve operation. The Fuel Storage Tanker needs attachment to the Fuel Draining Hose for fuel removal until the sensor mounting flange reaches a position below the fuel level. Afterward, the fuel level sensor access cover can be accessed by removing three screws which must be torqued to 2 Nm (18 lb-in) following reinstallation. The sensor requires you to disconnect its electrical connector then put absorbent pads under work area and release the lock tab to rotate counterclockwise until you lift it out. Carefully handle the fuel level sensor to prevent damage to its float arm while inspecting the sensor flange and O-ring contact areas of the mating surfaces; bendage or corrosion or scratches require replacement of the sensor or fuel tank. Always replace the O-ring seal and apply clean engine oil to it before the installation process. Reverse all removal steps by placing the locking tab of the fuel level sensor in its correct position.

OEM Lincoln MKZ Fuel Level Sensor

Gas Gauge Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

17 Fuel Level Sensors found

View related parts
Lincoln MKZ Fuel Pump Part Number: HG9Z-9H307-K
$776.25 MSRP: $1254.55
You Save: $478.30 (39%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sender And Pump Assembly; Fuel Pump Assembly
- Replaces: HG9Z-9H307-H, HG9Z-9H307-D
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2017-2020 Lincoln MKZ | Black Label, Reserve, Reserve II, Select | 6 Cyl 3.0 L GAS
View related parts
Lincoln MKZ Fuel Gauge Sending Unit, Driver Side Part Number: AE5Z-9A299-F
$69.47 MSRP: $96.10
You Save: $26.63 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sender Assembly - Fuel Tank; Fuel Pump Module; Fuel Level Sensor; Sending Unit; Fuel Sender Unit; Sending Unit
- Manufacturer Note: Service Kit
- Position: Driver Side
- Replaces: AE5Z-9A299-B, PS-392
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2012 Lincoln MKZ | Base | 6 Cyl 3.5 L GAS
View related parts
Lincoln MKZ Fuel Gauge Sending Unit Part Number: 7E5Z-9A299-T
$56.80 MSRP: $78.58
You Save: $21.78 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sender Assembly - Fuel Tank; Fuel Sender and Hanger Assembly; Fuel Level Sensor; Fuel Sending Unit; Sending Unit
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2009 Lincoln MKZ | Base | 6 Cyl 3.5 L GAS
View related parts
Lincoln MKZ Fuel Gauge Sending Unit Part Number: FP5Z-9A299-B
$117.94 MSRP: $187.27
You Save: $69.33 (38%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sender Assembly - Fuel Tank; Fuel Tank Sending Unit; Fuel Level Sensor; Fuel Sending Unit; Sending Unit
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2017-2020 Lincoln MKZ | Base, Black Label, Premiere, Reserve, Reserve I, Reserve II, Select | 4 Cyl 2.0 L GAS
View related parts
Lincoln MKZ Fuel Gauge Sending Unit Part Number: AE5Z-9A299-E
$37.40 MSRP: $50.89
You Save: $13.49 (27%)
ADD TO CART
Product Specifications
- Other Name: Sender Assembly - Fuel Tank; Fuel Sender & Hanger Assembly; Fuel Level Sensor; Fuel Sender Unit; Sending Unit
- Manufacturer Note: Service Kit
- Replaces: AE5Z-9A299-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2012 Lincoln MKZ | Base, Hybrid | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L GAS
View related parts
Lincoln MKZ Fuel Gauge Sending Unit, Passenger Side Part Number: 7E5Z-9275-C
$66.79 MSRP: $92.40
You Save: $25.61 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sender Assembly - Fuel Tank; Fuel Sender and Hanger; Sending Unit; Fuel Level Sensor; Fuel Pump.; Fuel Pump Assembly; Fuel Sender Unit
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2012 Lincoln MKZ | Base | 6 Cyl 3.5 L GAS
View related parts
Lincoln MKZ Fuel Gauge Sending Unit Part Number: HG9Z-9A299-A
$119.08 MSRP: $189.09
You Save: $70.01 (38%)
ADD TO CART
Product Specifications
- Other Name: Sender Assembly - Fuel Tank; Fuel Tank Sending Unit; Fuel Level Sensor; Fuel Sending Unit; Sending Unit
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2017-2020 Lincoln MKZ | Base, Black Label, Premiere, Reserve, Reserve I, Reserve II, Select | 4 Cyl 2.0 L GAS, 6 Cyl 3.0 L GAS
View related parts
Lincoln MKZ Fuel Gauge Sending Unit Part Number: DG9Z-9A299-G
$111.61 MSRP: $183.64
You Save: $72.03 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sender Assembly - Fuel Tank; Sending Unit; Fuel Pump Module; Level Sensor.; Sending Unit
- Replaces: PS-942, DG9Z-9A299-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2020 Lincoln MKZ | Base, Black Label, Premiere, Reserve, Reserve I, Reserve II, Select | 4 Cyl 2.0 L GAS
View related parts
Lincoln MKZ Fuel Gauge Sending Unit, Passenger Side Part Number: DG9Z-9A299-E
$61.72 MSRP: $98.00
You Save: $36.28 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sender Assembly - Fuel Tank; Fuel Tank Sending Unit, Right; Fuel Transfer Unit; Fuel Level Sensor; Fuel Sending Unit; Sending Unit
- Manufacturer Note: Use With 9275 Fuel Pump
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2016 Lincoln MKZ | Base, Black Label | 4 Cyl 2.0 L GAS, 6 Cyl 3.7 L GAS
View related parts
Lincoln MKZ Fuel Gauge Sending Unit, Driver Side Part Number: DG9Z-9A299-C
$64.46 MSRP: $102.36
You Save: $37.90 (38%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sender Assembly - Fuel Tank; Left Fuel Tank Sending Unit; Fuel Pump Module; Fuel Level Sensor.; Sending Unit
- Manufacturer Note: Use With 9H307 Fuel Pump
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2016 Lincoln MKZ | Base, Black Label | 4 Cyl 2.0 L GAS, 6 Cyl 3.7 L GAS
View related parts
Lincoln MKZ Fuel Pump, Passenger Side Part Number: DG9Z-9275-A
$101.22 MSRP: $160.73
You Save: $59.51 (38%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sender Assembly - Fuel Tank; Electric Fuel Pump, Right; Fuel Transfer Unit; Fuel Pump Assembly
- Manufacturer Note: Before Ordering Please Refer To OASIS Message SSM 46126 Or BCM 3847
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2016 Lincoln MKZ | Base, Black Label | 4 Cyl 2.0 L GAS, 6 Cyl 3.7 L GAS
View related parts
Lincoln MKZ Fuel Pump Part Number: EG9Z-9H307-D
$364.61 MSRP: $623.64
You Save: $259.03 (42%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sender And Pump Assembly; Electric Fuel Pump; Fuel Pump Module Assembly; Fuel Pump Assembly
- Replaces: PFS-1077, DG9Z-9H307-M, EG9Z-9H307-B, PFS-982
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2017-2020 Lincoln MKZ | Black Label Hybrid, Hybrid, Premiere Hybrid, Reserve Hybrid, Reserve I Hybrid, Reserve II Hybrid, Select Hybrid | 4 Cyl 2.0 L FULL HYBRID EV-GAS (FHEV)
View related parts
Lincoln MKZ Fuel Gauge Sending Unit Part Number: HG9Z-9A299-G
$102.56 MSRP: $172.18
You Save: $69.62 (41%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sender Assembly - Fuel Tank; Fuel Level Sensor; Fuel Sending Unit; Sending Unit
- Replaces: HG9Z-9A299-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2017-2020 Lincoln MKZ | Black Label, Reserve, Reserve II, Select | 6 Cyl 3.0 L GAS
View related parts
Lincoln MKZ Fuel Gauge Sending Unit Part Number: EG9Z-9A299-A
$98.88 MSRP: $166.00
You Save: $67.12 (41%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sender Assembly - Fuel Tank; Sending Unit; Fuel Pump Module; Level Sensor.; Sending Unit
- Replaces: DG9Z-9A299-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2016 Lincoln MKZ | Base, Black Label, Black Label Hybrid, Hybrid | 4 Cyl 2.0 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.0 L GAS
View related parts
Lincoln MKZ Fuel Gauge Sending Unit Part Number: DG9Z-9A299-M
$159.84 MSRP: $269.09
You Save: $109.25 (41%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sender Assembly - Fuel Tank; Fuel Tank Sending Unit; Fuel Level Sensor; Fuel Sending Unit; Sending Unit
- Replaces: DG9Z-9A299-F
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2017-2020 Lincoln MKZ | Black Label Hybrid, Hybrid, Premiere Hybrid, Reserve Hybrid, Reserve I Hybrid, Reserve II Hybrid, Select Hybrid | 4 Cyl 2.0 L FULL HYBRID EV-GAS (FHEV)
View related parts
Lincoln MKZ Fuel Gauge Sending Unit Part Number: 8E5Z-9A299-S
Product Specifications
- Other Name: Sender Assembly - Fuel Tank; Fuel Sender and Hanger Assembly; Fuel Level Sensor; Fuel Sending Unit; Fuel Sender Unit; Sending Unit
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2009 Lincoln MKZ | Base | 6 Cyl 3.5 L GAS
View related parts
Lincoln MKZ Fuel Gauge Sending Unit Part Number: 7E5Z-9A299-S
Product Specifications
- Other Name: Sender Assembly - Fuel Tank; Fuel Sender and Hanger Assembly; Fuel Level Sensor; Fuel Sending Unit; Fuel Sender Unit; Sending Unit
- Replaces: 6E5Z-9275-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007 Lincoln MKZ | Base | 6 Cyl 3.5 L GAS

Lincoln MKZ Fuel Level Sensor

OEM Fuel Level Sensor boasts unmatched quality. Each part goes through full quality checks. They adhere to Lincoln's official factory standards. These steps remove flaws and inconsistencies. So you can get Fuel Level Sensor with long life and a perfect fit. Come to our website and find genuine Lincoln MKZ parts. We keep a wide inventory of OEM MKZ parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

Lincoln MKZ Fuel Level Sensor is such assembly that is very crucial as it contributes immensely towards the Lincoln MKZ cars reliability and its performance. Sited inside the fuel tank or on the fuel pump carrier bracket, this sensor gives accurate fuel level information to the driver, and discourages or encourages the driver to re-fuel as the case maybe. For example, the Lincoln MKZ Fuel Level Sensor does this by a combination of a float that moves along with an actuating rod that features a resistor which sends exact signals to the fuel gauge. Popular for its reliability, this sensor is built for high temperature application while at the Same time enjoying efficiency in power consumption and ease to calibrate. It has to be very reliable especially when it comes to the performance of a vehicle to prevent inconsequential but potentially hazardous diagnoses of the state of fuel. Designed to fit different Lincoln MKZ car models, the Fuel Level Sensor raises its buyers' effectiveness and safety level, making it possible for them to rely on their car's fuel level. As it will be seen, a number of distinct qualities, including its contemporary electronic style and corporate sturdiness, that are unique to the Lincoln MKZ Fuel Level Sensor makes it an even more relevant choice among auto aficionados especially those who have an appreciation for luxury sedans. This sensor is part of Lincoln MKZ company - they have one of the top levels of commitment for producing only the premier quality cars for the market that is why this sensor is a perfect example of the concern's desire to guarantee the comfort and security of using the brand new luxury car.

Lincoln MKZ Fuel Level Sensor Parts and Q&A

Fuel Gauge Sending Unit, Passenger Side
7E5Z-9275-C
Q: How to service the fuel level sensor safely and effectively on Lincoln MKZ?
A:
Service of the fuel level sensor must begin with safety precautions such as preventing smoking and using open flames and personal electronic devices close to fuel components because these areas contain flammable mixtures. You must first drain fuel system pressure while disconnecting the ground cable from the battery. Rotate the fuel tank filler cap in the counterclockwise direction only a quarter turn then place it safely aside. The Fuel Draining Hose removal must involve slow hose movement to stop fitting detachment while proper funnel placement inside the fuel tank filler pipe until the fitting activates safety valve operation. The Fuel Storage Tanker needs attachment to the Fuel Draining Hose for fuel removal until the sensor mounting flange reaches a position below the fuel level. Afterward, the fuel level sensor access cover can be accessed by removing three screws which must be torqued to 2 Nm (18 lb-in) following reinstallation. The sensor requires you to disconnect its electrical connector then put absorbent pads under work area and release the lock tab to rotate counterclockwise until you lift it out. Carefully handle the fuel level sensor to prevent damage to its float arm while inspecting the sensor flange and O-ring contact areas of the mating surfaces; bendage or corrosion or scratches require replacement of the sensor or fuel tank. Always replace the O-ring seal and apply clean engine oil to it before the installation process. Reverse all removal steps by placing the locking tab of the fuel level sensor in its correct position.