How to service the upper intake manifold on Lincoln MKZ?

The service of the upper intake manifold requires removing the air cleaner outlet pipe followed by disconnecting the throttle body electrical connector with the evaporative emissions (EVAP) tube and brake booster vacuum hose along with a positive crankcase ventilation (PCV) tube from the PCV valve. After disconnecting the PCV fitting electrical connector users should remove the wiring harness retainers from the upper intake manifold. The cylinder block heater wiring harness retainer needs to be detached if it applies. First remove upper intake manifold support bracket bolts then take away the six bolts holding the upper intake manifold in place while discarding the gaskets. All sealing surfaces on both the upper and lower intake manifold need inspection before mounting new gaskets for installation. The installer must use new gaskets for the upper intake manifold before bolting it into place using the specified sequence to a torque setting of 10 Nm (89 inch lbs.). Secure the two upper intake manifold support bracket bolts while torquing them to 10 Nm (89 inch lbs.). Reinstall the cylinder block heater wiring harness retainer whenever needed followed by reattachment of wiring harness retainers. Secure the PCV fitting electrical connector and the PCV tube to the PCV valve after attaching the brake booster vacuum hose and the throttle body electrical connector as well as the EVAP tube. Reinstall the air cleaner outlet pipe as the last step.

OEM Lincoln MKZ Intake Manifold

Engine Intake Manifold

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

11 Intake Manifolds found

View related parts
Lincoln MKZ Intake Manifold
Part Number: 9E5Z-9424-C
$154.58 MSRP: $225.00
You Save: $70.42 (32%)
ADD TO CART
Product Specifications
- Other Name: Manifold Assembly - Inlet; Engine Intake Manifold
- Replaces: 9E5Z-9424-A, 9E5Z-9424-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2011-2012 Lincoln MKZ | Hybrid | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
Lincoln MKZ Intake Manifold
Part Number: CJ5Z-9424-G
$54.41 MSRP: $77.83
You Save: $23.42 (31%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Manifold Assembly - Inlet; Engine Intake Manifold
- Replaces: CJ5Z-9424-B, CJ5Z-9424-C, CJ5Z-9424-D
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2017-2020 Lincoln MKZ | Base, Black Label, Premiere, Reserve, Reserve I, Reserve II, Select | 4 Cyl 2.0 L GAS
View related parts
Lincoln MKZ Intake Manifold
Part Number: DS7Z-9424-L
$80.95 MSRP: $117.83
You Save: $36.88 (32%)
ADD TO CART
Product Specifications
- Other Name: Manifold Assembly - Inlet; Engine Intake Manifold
- Replaces: DS7Z-9424-A, DS7Z-9424-F
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2020 Lincoln MKZ | Black Label Hybrid, Hybrid, Premiere Hybrid, Reserve Hybrid, Reserve I Hybrid, Reserve II Hybrid, Select Hybrid | 4 Cyl 2.0 L FULL HYBRID EV-GAS (FHEV)
View related parts
Lincoln MKZ Intake Manifold
Part Number: FT4Z-9424-E
$82.10 MSRP: $119.50
You Save: $37.40 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Manifold Assembly - Inlet; Engine Intake Manifold
- Replaces: FT4Z-9424-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2017-2020 Lincoln MKZ | Black Label, Reserve, Reserve II, Select | 6 Cyl 3.0 L GAS
View related parts
Lincoln MKZ Intake Manifold
Part Number: CJ5Z-9424-E
$47.30 MSRP: $67.67
You Save: $20.37 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Manifold Assembly - Inlet; Engine Intake Manifold
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2016 Lincoln MKZ | Base, Black Label | 4 Cyl 2.0 L GAS
View related parts
Lincoln MKZ Intake Manifold, Upper
Part Number: FT4Z-9424-D
$116.79 MSRP: $170.00
You Save: $53.21 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Manifold Assembly - Inlet
- Position: Upper
- Replaces: FT4Z-9424-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2016 Lincoln MKZ | Base, Black Label | 6 Cyl 3.7 L GAS
View related parts
Lincoln MKZ Intake Manifold, Lower
Part Number: CT4Z-9424-C
$129.39 MSRP: $188.33
You Save: $58.94 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Manifold Assembly - Inlet; Engine Intake Manifold, Lower
- Position: Lower
- Replaces: AT4Z-9424-F, CT4Z-9424-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2016 Lincoln MKZ | Base, Black Label | 6 Cyl 3.7 L GAS
View related parts
Lincoln MKZ Intake Manifold, Lower
Part Number: 7T4Z-9424-C
Product Specifications
- Other Name: Manifold Assembly - Inlet; Engine Intake Manifold, Lower
- Position: Lower
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2012 Lincoln MKZ | Base | 6 Cyl 3.5 L GAS
View related parts
Lincoln MKZ Intake Manifold, Upper
Part Number: 7T4Z-9424-D
$130.53 MSRP: $190.00
You Save: $59.47 (32%)
Product Specifications
- Other Name: Manifold Assembly - Inlet; Engine Intake Manifold, Upper; Intake Plenum
- Position: Upper
- Replaces: 7T4Z-9424-DA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2008 Lincoln MKZ | Base | 6 Cyl 3.5 L GAS
View related parts
Lincoln MKZ Intake Manifold, Lower
Part Number: CT4Z-9424-B
Product Specifications
- Other Name: Manifold Assembly - Inlet
- Position: Lower
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2016 Lincoln MKZ | Base, Black Label | 6 Cyl 3.7 L GAS
View related parts
Lincoln MKZ Intake Manifold, Upper
Part Number: 7T4Z-9424-E
Product Specifications
- Other Name: Manifold Assembly - Inlet; Engine Intake Manifold, Upper
- Position: Upper
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2012 Lincoln MKZ | Base | 6 Cyl 3.5 L GAS

Lincoln MKZ Intake Manifold

Welcome to our website where you can discover high-quality, genuine Lincoln MKZ Intake Manifold. We offer an extensive inventory of OEM Lincoln MKZ Intake Manifold at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.

Lincoln MKZ Intake Manifold Parts Questions & Experts Answers

Intake Manifold, Upper
7T4Z-9424-D
Q: How to service the upper intake manifold on Lincoln MKZ?
A: The service of the upper intake manifold requires removing the air cleaner outlet pipe followed by disconnecting the throttle body electrical connector with the evaporative emissions (EVAP) tube and brake booster vacuum hose along with a positive crankcase ventilation (PCV) tube from the PCV Valve. After disconnecting the PCV fitting electrical connector users should remove the wiring harness retainers from the upper intake manifold. The cylinder block heater wiring harness retainer needs to be detached if it applies. First remove upper intake manifold support bracket bolts then take away the six bolts holding the upper intake manifold in place while discarding the gaskets. All sealing surfaces on both the upper and lower intake manifold need inspection before mounting new gaskets for installation. The installer must use new gaskets for the upper intake manifold before bolting it into place using the specified sequence to a torque setting of 10 Nm (89 inch lbs.). Secure the two upper intake manifold support bracket bolts while torquing them to 10 Nm (89 inch lbs.). Reinstall the cylinder block heater wiring harness retainer whenever needed followed by reattachment of wiring harness retainers. Secure the PCV fitting electrical connector and the PCV tube to the PCV valve after attaching the brake booster vacuum hose and the throttle body electrical connector as well as the EVAP tube. Reinstall the air cleaner outlet pipe as the last step.