How to service the radiator cooling fan motor on Lincoln Town Car?

The first step for servicing the radiator cooling fan motor includes removing the degas bottle followed by disconnecting the connector. The first step in servicing the radiator cooling fan motor requires removing two bolts and the fan blade together with the fan motor and fan shroud assembly. The installation process should reverse the steps for removal.

How to Address Issues with the Fan Motor in the Radiator Cooling System of a Lincoln Town Car?

Before servicing the radiator cooling fan motor with its shroud first drain out all cooling system fluid. The power steering reservoir restraining bolt requires removal before the part should be placed aside. The reinstall process requires bolting the component tightly to 10 Nm (89 lb-in). First disconnect both degas bottle hoses before removing its retaining bolt and reinstall it with a torque of 10 Nm (89 lb-in). Start by detaching the upper radiator hose then put it aside. Next, disconnect the transmission cooler tubes from both the cooling fan motor and shroud. The electrical connector of the cooling fan motor must be detached with the lower radiator hose at least one inch away from both the motor and the shroud. The two bolts that secure the cooling fan motor and shroud should be tightened back to 7 Nm (62 lb-in) when reattaching this assembly. The removal process should end with filling and bleeding of the cooling system.

OEM Lincoln Town Car Fan Motor

Cooling Fan Motor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Fan Motors found

View related parts
Lincoln Town Car Fan & Motor Part Number: 8W1Z-8C607-C
$190.46 MSRP: $323.64
You Save: $133.18 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor And Fan Assembly - Engine Cooling; Dual Radiator and Condenser Fan; Radiator Fan; Fan Blade; Fan Assembly; Fan Module
- Replaces: 8W1Z-8C607-A, RF-258, 7W1Z-8C607-B, 8W1Z-8C607-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2011 Lincoln Town Car | Designer Series, Executive, Executive L, Protection Series, Signature, Signature L, Signature Limited | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS
View related parts
Lincoln Town Car Fan & Motor Part Number: F5AZ-8C607-B
Product Specifications
- Other Name: Fan And Motor Assembly; Engine Cooling Fan Assembly; Radiator Fan Assembly; Cooling Fan Assembly; Fan Assembly; Auxiliary Fan
- Manufacturer Note: This application does not have a separate shroud(8146) - this design is a two fan system set-up(mechanical and electrical)- 8C607 includes shroud, electric fan and motor, if belt driven fan, refer to 8600
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1995-1997 Lincoln Town Car | Anniversary, Base, Cartier, Cypress, Executive, Signature, Touring Edition | 8 Cyl 4.6 L GAS
View related parts
Lincoln Town Car Fan & Motor Part Number: 3W1Z-8C607-BD
Product Specifications
- Other Name: Fan and Motor Assembly; Dual Radiator and Condenser Fan; Engine Cooling Fan; Radiator Fan; Cooling Fan; Fan Blade; Fan Assembly; Fan Module
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2005 Lincoln Town Car | Cartier, Cartier L, Executive, Executive L, Executive Protection Series, Protection Series, Signature, Signature L, Signature Limited, Ultimate, Ultimate L | 8 Cyl 4.6 L GAS
View related parts
Lincoln Town Car Fan & Motor Part Number: 1W1Z-8C607-AA
Product Specifications
- Other Name: Fan and Motor Assembly; Dual Radiator and Condenser Fan; Engine Cooling Fan; Radiator Fan; Cooling Fan; Fan Blade; Fan Assembly; Fan Module
- Replaces: YW1Z-8C607-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2000-2003 Lincoln Town Car | Cartier, Cartier L, Executive, Executive L, Executive Protection Series, Signature | 8 Cyl 4.6 L GAS
View related parts
Lincoln Town Car Fan & Motor Part Number: F8VZ-8C607-AA
Product Specifications
- Other Name: Fan and Motor Assembly; Dual Radiator and Condenser Fan; Engine Cooling Fan; Radiator Fan; Cooling Fan; Fan Blade; Fan Assembly; Fan Module
- Manufacturer Note: #F8VH 8C607-AH - this design does not use a resistor on side of the shroud - if wire repair kit is required, order F8AZ-14A411-BA, BEFORE 4/10/00
- Replaced by: 1U2Z-14S411-AGB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1998-2000 Lincoln Town Car | Base, Cartier, Executive, Signature | 8 Cyl 4.6 L GAS

Lincoln Town Car Fan Motor

OEM Fan Motor boasts unmatched quality. Each part goes through full quality checks. They adhere to Lincoln's official factory standards. These steps remove flaws and inconsistencies. So you can get Fan Motor with long life and a perfect fit. Come to our website and find genuine Lincoln Town Car parts. We keep a wide inventory of OEM Town Car parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

The Fan Motor is a component in the car that has a wide acclaim for its operations; especially in cooling the car. This cool air fan motor drives the cooling fan blades to provide air that will circulate to the radiator part is very essential in cooling the engine from overheating. In the course of evolution of the Lincoln Town Car, there have been numerous changes of the fan motor with regard to the output and consumption rates. This kind of flexibility has been a fallout of Lincoln's spirit of innovation and quality to make the Town Car a unique model in the car industry. Available for different Town Car models manufactured from 1981 through 2011, the Fan Motor assists in improving the car's performance as well as increasing safety. This particular fan motor ensures optimum temperatures of the engine and therefore bear a significant role in enhancing the durability of the engine and reliability of the car. Characteristic features of the Fan Motor are its the high build quality and the complex design that ensures the lack of noise during its operation and efficient cooling. Such little touches add not only to the enjoyment of the car when actually driving but also serve to cast the Lincoln Town Car in the role it is perhaps given, a real luxury car. Owning to its features and efficiency in its performance, reliability and compatibility in the different Lincoln Town Car models provides the Town Car Fan Motor as a crucial component of the Town Car model thus keeping up with the Lincoln brand in delivering on its promise of a quality ride.

Lincoln Town Car Fan Motor Parts and Q&A

Fan & Motor
1W1Z-8C607-AA
Q: How to service the radiator cooling fan motor on Lincoln Town Car?
A:
The first step for servicing the radiator cooling fan motor includes removing the degas bottle followed by disconnecting the connector. The first step in servicing the radiator cooling fan motor requires removing two bolts and the Fan Blade together with the fan motor and fan shroud assembly. The installation process should reverse the steps for removal.
Fan & Motor
8W1Z-8C607-C
Q: How to Address Issues with the Fan Motor in the Radiator Cooling System of a Lincoln Town Car?
A:
Before servicing the radiator cooling fan motor with its shroud first drain out all cooling system fluid. The Power Steering Reservoir restraining bolt requires removal before the part should be placed aside. The reinstall process requires bolting the component tightly to 10 Nm (89 lb-in). First disconnect both degas bottle hoses before removing its retaining bolt and reinstall it with a torque of 10 Nm (89 lb-in). Start by detaching the upper radiator hose then put it aside. Next, disconnect the transmission cooler tubes from both the cooling fan motor and shroud. The electrical connector of the cooling fan motor must be detached with the lower radiator hose at least one inch away from both the motor and the shroud. The two bolts that secure the cooling fan motor and shroud should be tightened back to 7 Nm (62 lb-in) when reattaching this assembly. The removal process should end with filling and bleeding of the cooling system.