OEM Mercury Cougar Cruise Control Servo

Mercury Cougar Cruise Control Servo Parts and Q&A

• Cruise Servo
  1S8Z9C735AA
  Q: How to Address Issues with the Cruise Control Servo on a Mercury Cougar?

  A:

  Start the servicing and repairing process of the cruise control servo by removing the speed control cable from the engine cover along with the intake air resonator. Detach the speed control cable from the throttle body cam before removing the throttle bracket by unhooking the cable and pushing the retaining clip for cable extraction. First disconnect the speed control actuator electrical connector then detach the actuator by removing its bolt. You should remove the speed control cable cap from the speed control actuator by both depressing the locking clip and turning the cap counterclockwise. The speed control cable must be detached from the speed control actuator pulley by releasing the locking spring to push the cable end out of its respective slot. To install the actuator use the reverse steps of removal.
• Cruise Servo
  XS8Z-9C735-AA
  Q: How to service and repair the cruise control servo on Mercury Cougar?

  A:

  Service and repair of the cruise control servo starts with cable detachment from the engine cover followed by intake air resonator removal. The speed control cable should be disconnected from the throttle body cam before manually removing it from the throttle bracket by pushing the retaining clip and pulling out the cable. The service team should first disconnect the electrical connector of the speed control actuator followed by removing the actuator bolt in order to separate the speed control actuator. To access the speed control cable cap from the actuator one must first depress and secure the locking clip followed by turning the cap counterclockwise. The process ends by removing the speed control cable at the actuator pulley through unlocking the spring and pushing the cable out of its pulley slot. Follow the opposite steps used for removal to install the components.