How to Service and Repair the Brake Line on Mercury Mariner?

Begin the service of brake flexible hose with a fitting disconnection from the wheel cylinder while tightening it to 15 Nm (11 lb-ft) before reinstallation. After removal of the brake flexible hose bracket bolt proceed to apply torque at 17 Nm (13 lb-ft) during installation. The brake tube fitting must be disconnected from the brake flexible hose before tightening it to 15 Nm (11 lb-ft) when reattaching it. You must take the flexible hose clip and brake hose away before installation where you should tighten the brake hose to 15 Nm (11 lb-ft). The process should end with the return of brake system bleeding. Customers need to replace brake fluid with manufacturer-approved clean fluid from new bottles instead of using fluid drained before to protect brake system health. A leak of brake fluid must be cleaned right away with water because it poses a threat to paint and plastic materials. To obtain emergency medical information regarding Ford/Motorcraft products dial 1-800-959-3673 within USA or Canada as well as refer to the product Material Safety Data Sheet (MSDS) when available.

OEM Mercury Mariner Brake Line

Brake Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Brake Lines found

View related parts
Mercury Mariner Flex Hose, Front Part Number: BL8Z-2078-A
$43.40 MSRP: $68.91
You Save: $25.51 (38%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Hose Assembly - Brake; Brake Hydraulic Hose, Front; Brake Hose; Brake Line; Front Flex Hose; Hydraulic Hose
- Position: Front
- Replaces: 9L8Z-2078-A, 8L8Z-2078-A, 8L8Z-2078-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2011 Mercury Mariner | Base, Hybrid, Premier | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Mercury Mariner Flex Hose, Driver Side Part Number: 9L8Z-2A442-B
$27.37 MSRP: $43.45
You Save: $16.08 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly - Brake; Brake Hydraulic Hose, Rear Left; Brake Hose; Brake Line; Hydraulic Hose
- Position: Driver Side
- Replaces: 8L8Z-2282-B, 8L8Z-2A442-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2011 Mercury Mariner | Base, Convenience, Hybrid, Luxury, Premier | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Mercury Mariner Flex Hose, Passenger Side Part Number: 9L8Z-2A442-A
$25.53 MSRP: $40.55
You Save: $15.02 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly - Brake; Brake Hydraulic Hose, Rear Right; Brake Hose; Brake Line; Hydraulic Hose
- Position: Passenger Side
- Replaces: 8L8Z-2282-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2011 Mercury Mariner | Base, Convenience, Hybrid, Luxury, Premier | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Mercury Mariner Brake Hose, Front Part Number: 7L8Z-2078-B
$23.01 MSRP: $36.55
You Save: $13.54 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly - Brake; Hydraulic Hose; Brake Line; Front Flex Hose
- Position: Front
- Replaces: 7L8Z-2078-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Mercury Mariner | Base, Convenience, Hybrid, Luxury, Premier | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
Mercury Mariner Flex Hose, Driver Side Part Number: 5L8Z-2282-AC
$47.29 MSRP: $75.09
You Save: $27.80 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly - Brake; Brake Hydraulic Hose, Rear Left, Rear Right; Brake Hose; Brake Line; Hydraulic Hose
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Mercury Mariner | Base, Convenience, Hybrid, Luxury, Premier | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
Mercury Mariner Flex Hose Part Number: 5L8Z-2282-AA
$38.70 MSRP: $61.45
You Save: $22.75 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly - Brake; Brake Hydraulic Hose, Rear Left, Rear Right; Brake Hose; Brake Line; Hydraulic Hose
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Mercury Mariner | Base, Convenience, Hybrid, Luxury, Premier | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
Mercury Mariner Flex Hose, Rear Driver Side Part Number: 8M6Z-2282-B
Product Specifications
- Other Name: Hose Assembly - Brake; Brake Hydraulic Hose, Rear Left; Brake Hose; Brake Line; Hydraulic Hose
- Position: Rear Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2008 Mercury Mariner | Hybrid | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV)
View related parts
Mercury Mariner Flex Hose, Rear Passenger Side Part Number: 8M6Z-2282-A
Product Specifications
- Other Name: Hose Assembly - Brake; Brake Hydraulic Hose, Rear Right; Brake Hose; Brake Line; Brake Hydraulic Hose; Hydraulic Hose
- Position: Rear Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2008 Mercury Mariner | Convenience, Hybrid, Luxury, Premier | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS

Mercury Mariner Brake Line

OEM Brake Line boasts unmatched quality. Each part goes through full quality checks. They adhere to Mercury's official factory standards. These steps remove flaws and inconsistencies. So you can get Brake Line with long life and a perfect fit. Come to our website and find genuine Mercury Mariner parts. We keep a wide inventory of OEM Mariner parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

The Brake Line of Mercury Mariner car is the hydraulic system that transmits brake fluid from the master cylinder to brake caliper pistons for proper functioning of hydraulic brake system. The brake systems that utilize metal brake lines are vulnerable to corrosion and impact and this makes the fluid to leak thus causing a loss of hydraulic pressure. Rear brake hoses can also be damaged mechanically and chimically, and this influences the brakes. In cases of replacement, pre-bent brake line kits and direct replacement brake hoses are used and are considered convenient as they are not prone to corrosion. It should also be noted that replacement of the flexible brake lines with the rigid braided stainless steel ones can enhance the vehicle's brake performance in a various ways, as well as for extreme dynamic maneuvering.

Mercury Mariner Brake Line Parts and Q&A

Flex Hose, Front
BL8Z-2078-A
Q: How to Service and Repair the Brake Line on Mercury Mariner?
A:
Begin the service of brake flexible hose with a fitting disconnection from the Wheel Cylinder while tightening it to 15 Nm (11 lb-ft) before reinstallation. After removal of the brake flexible hose bracket bolt proceed to apply torque at 17 Nm (13 lb-ft) during installation. The brake tube fitting must be disconnected from the brake flexible hose before tightening it to 15 Nm (11 lb-ft) when reattaching it. You must take the flexible hose clip and brake hose away before installation where you should tighten the brake hose to 15 Nm (11 lb-ft). The process should end with the return of brake system bleeding. Customers need to replace brake fluid with manufacturer-approved clean fluid from new bottles instead of using fluid drained before to protect brake system health. A leak of brake fluid must be cleaned right away with water because it poses a threat to paint and plastic materials. To obtain emergency medical information regarding Ford/Motorcraft products dial 1-800-959-3673 within USA or Canada as well as refer to the product Material Safety Data Sheet (MSDS) when available.