How to Properly Maintain the Backing Plate on a Mercury Mariner?

Start the brake backing plate service by deleting the rear wheel cylinder from the system. Replacement requires the removal of brake flexible hose bracket bolt which needs tightening to 15 Nm (133 lb-in) during reinstallation. Use a tool to compressor the parking brake cable conduit locking tabs and draw the parking brake cable assembly through the backing plate. The service requires users to first take off the rear wheel hub along with four backing plate bolts that detach the backing plate until reinstallation tighten the bolts to 85 Nm (63 lb-ft). The setup process will finish with the reverse order of the previous removal procedures.

How to service and repair the brake backing plate on Mercury Mariner?

Brake backing plate repair and servicing begins by eliminating the rear wheel cylinder and jounce hose bracket bolt before torquing the bolt to 17 Nm (13 ft. lbs.). Press the parking brake cable conduit locking tabs until you can draw the brake cable assembly through the backing plate. After taking off the rear wheel hub you must detach the four backing plate bolts and backing plate before reinstalling all components while tightening the bolts to 85 Nm (63 ft. lbs.). The installation process will conclude by reversing the steps of removal.

OEM Mercury Mariner Backing Plate

Brake Dust Shield

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Backing Plates found

View related parts
Mercury Mariner Splash Shield, Front Part Number: YL8Z-2K004-AA
Product Specifications
- Other Name: Shield - Splash; Brake Dust Shield, Front; Dust Shield; Brake Dust Shield
- Manufacturer Note: RH/LH
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2011 Mercury Mariner | Base, Convenience, Hybrid, Luxury, Premier | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Mercury Mariner Backing Plate, Rear Driver Side Part Number: CL8Z-2B540-B
Product Specifications
- Other Name: Bracket; Disc Brake Caliper Bracket, Rear Left; Brake Dust Shield; Caliper Mount
- Position: Driver Side
- Replaces: 6L8Z-2C220-B, 6L8Z-2B540-B, 6L8Z-2B540-D
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Mercury Mariner | Base, Convenience, DX, Ford Hybrid, Hybrid, Limited, Luxury, LX, Mercury Convenience, Mercury Hybrid, Mercury Luxury, Mercury Premier, Premier, XL, XLS, XLT | 2.3L L4, 3.0L V6, 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
Mercury Mariner Backing Plate, Rear Passenger Side Part Number: CL8Z-2B540-A
Product Specifications
- Other Name: Bracket; Disc Brake Caliper Bracket, Rear Right; Brake Dust Shield; Caliper Mount
- Position: Passenger Side
- Replaces: 6L8Z-2B540-C, 6L8Z-2B540-A, 6L8Z-2C220-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Mercury Mariner | Base, Convenience, DX, Ford Hybrid, Hybrid, Limited, Luxury, LX, Mercury Convenience, Mercury Hybrid, Mercury Luxury, Mercury Premier, Premier, XL, XLS, XLT | 2.3L L4, 3.0L V6, 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
Mercury Mariner Backing Plate, Rear Driver Side Part Number: 8L8Z-2212-B
Product Specifications
- Other Name: Plate Assembly - Brake Back; Brake Backing Plate, Rear Left; Brake Dust Shield
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2011 Mercury Mariner | Base, Hybrid, Premier | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Mercury Mariner Backing Plate, Rear Passenger Side Part Number: 8L8Z-2211-B
Product Specifications
- Other Name: Plate Assembly - Brake Back; Brake Backing Plate, Rear Right; Brake Dust Shield
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2011 Mercury Mariner | Base, Hybrid, Premier | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Mercury Mariner Backing Plate, Rear Driver Side Part Number: 8M6Z-2C220-B
Product Specifications
- Other Name: Adaptor; Disc Brake Caliper Bracket, Rear Left; Brake Dust Shield; Caliper Mount
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2011 Mercury Mariner | Base, Hybrid, Premier | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Mercury Mariner Backing Plate, Rear Driver Side Part Number: YL8Z-2212-AA
Product Specifications
- Other Name: Plate Assembly - Brake Backing; Brake Backing Plate, Rear Left; Brake Dust Shield; Plate Assembly - Brake Back
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Mercury Mariner | Base, Convenience, Hybrid, Luxury, Premier | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
Mercury Mariner Backing Plate, Rear Passenger Side Part Number: YL8Z-2211-AA
Product Specifications
- Other Name: Plate Assembly - Brake Backing; Brake Backing Plate, Rear Right; Brake Dust Shield; Plate Assembly - Brake Back
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Mercury Mariner | Base, Convenience, Hybrid, Luxury, Premier | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
Mercury Mariner Backing Plate, Rear Passenger Side Part Number: 8M6Z-2C220-A
Product Specifications
- Other Name: Adaptor; Disc Brake Caliper Bracket, Rear Right; Brake Dust Shield; Caliper Mount
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2011 Mercury Mariner | Base, Hybrid, Premier | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS

Mercury Mariner Backing Plate

OEM Backing Plate boasts unmatched quality. Each part goes through full quality checks. They adhere to Mercury's official factory standards. These steps remove flaws and inconsistencies. So you can get Backing Plate with long life and a perfect fit. Come to our website and find genuine Mercury Mariner parts. We keep a wide inventory of OEM Mariner parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

Mercury Mariner Backing Plate Parts and Q&A

Splash Shield, Front
YL8Z-2K004-AA
Q: How to Properly Maintain the Backing Plate on a Mercury Mariner?
A:
Start the brake backing plate service by deleting the rear Wheel Cylinder from the system. Replacement requires the removal of brake flexible hose bracket bolt which needs tightening to 15 Nm (133 lb-in) during reinstallation. Use a tool to compressor the Parking Brake Cable conduit locking tabs and draw the parking brake cable assembly through the backing plate. The service requires users to first take off the rear wheel hub along with four backing plate bolts that detach the backing plate until reinstallation tighten the bolts to 85 Nm (63 lb-ft). The setup process will finish with the reverse order of the previous removal procedures.
Backing Plate, Rear Passenger Side
CL8Z-2B540-A
Q: How to service and repair the brake backing plate on Mercury Mariner?
A:
Brake backing plate repair and servicing begins by eliminating the rear Wheel Cylinder and jounce hose bracket bolt before torquing the bolt to 17 Nm (13 ft. lbs.). Press the Parking Brake Cable conduit locking tabs until you can draw the brake cable assembly through the backing plate. After taking off the rear wheel hub you must detach the four backing plate bolts and backing plate before reinstalling all components while tightening the bolts to 85 Nm (63 ft. lbs.). The installation process will conclude by reversing the steps of removal.