How to service and repair the throttle body on Mercury Mariner?

A service or repair of the throttle body needs the initial step to be removing the battery ground cable. The service starts by removing the air cleaner outlet pipe after which you will remove the upper snow shield bolt along with its pin-type retainer to separate the upper snow shield. Reinstall the bolt with a torque of 10 Nm (89 lb-in). Cable removal from the throttle body must begin with disconnected accelerator and speed control cables before ending with disconnecting the throttle position sensor electrical connection. Check the throttle body gasket by removing its four bolts before making necessary replacements. The completion of the throttle body installation requires reversing the removal steps while the bolts receive a torque setting of 10 Nm (89 lb-in).

OEM Mercury Mariner Throttle Body

Fuel Injection Throttle Body

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Throttle Bodies found

View related parts
Mercury Mariner Throttle Body
Part Number: DS7Z-9E926-D
$177.48 MSRP: $281.82
You Save: $104.34 (38%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Throttle Body And Motor Assembly; Electronic Fuel Injection Throttle Body Assembly.
- Replaces: 9L8Z-9E926-A, DS7Z-9E926-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009-2011 Mercury Mariner | Base, Hybrid, Premier | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Mercury Mariner Throttle Body
Part Number: 5L8Z-9E926-AA
$24.61 MSRP: $34.04
You Save: $9.43 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Body Assembly - Carburetor Throttle; Fuel Inject Electronic Throttle Assembly; Body Assembly - Carburettor Throttle
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2008 Mercury Mariner | Base, Luxury, Premier | 6 Cyl 3.0 L GAS
View related parts
Mercury Mariner Throttle Body
Part Number: 5M6Z-9E926-CA
$851.55 MSRP: $1474.55
You Save: $623.00 (43%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Throttle Body And Motor Assembly; Fuel Inject Electronic Throttle Body Assembly; Fuel Injection Throttle Body Assembly
- Replaces: 5M6Z-9E926-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008 Mercury Mariner | Hybrid | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV)
View related parts
Mercury Mariner Throttle Body
Part Number: 5L8Z-9E926-A
Product Specifications
- Other Name: Body Assembly - Carburetor Throttle; Fuel Inject Electronic Throttle Assembly
- Replaces: 5L8Z-9E926-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2008 Mercury Mariner | Base, Convenience, Hybrid | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS

Mercury Mariner Throttle Body

Welcome to our website where you can discover high-quality, genuine Mercury Mariner Throttle Body. We offer an extensive inventory of OEM Mercury Mariner Throttle Body at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.

Mercury Mariner Throttle Body Parts Questions & Experts Answers

Throttle Body
5L8Z-9E926-A
Q: How to service and repair the throttle body on Mercury Mariner?
A: A service or repair of the throttle body needs the initial step to be removing the battery ground cable. The service starts by removing the air cleaner outlet pipe after which you will remove the upper snow shield bolt along with its pin-type retainer to separate the upper snow shield. Reinstall the bolt with a torque of 10 Nm (89 lb-in). Cable removal from the throttle body must begin with disconnected accelerator and speed control cables before ending with disconnecting the throttle position sensor electrical connection. Check the throttle body gasket by removing its four bolts before making necessary replacements. The completion of the throttle body installation requires reversing the removal steps while the bolts receive a torque setting of 10 Nm (89 lb-in).