How to Service the LH Halfshaft Wheel Seal on Mercury Mariner?

When changing the LH halfshaft seal, make sure that the vehicle is in neutral on a hoist. Take off the front LH halfshaft, stab the seal with a hole, and with a dent puller, take the seal off. Install a new seal using a seal installer, reconnect the halfshaft and fill the transmission with fluid.

OEM Mercury Mariner Wheel Seal

Wheel Axle Seal

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Wheel Seal found

View related parts
Mercury Mariner Axle Seal, Rear Driver Side Part Number: 5L8Z-4B416-AA
$14.99 MSRP: $21.27
You Save: $6.28 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal; Drive Axle Shaft Seal, Front Left; Rear; CV Axle Shaft Seal, Front; Left; Rear.; Axle Seals; Side Seal; Outer Seal; Inner Joint Assembly Seal; Drive Axle Shaft Seal
- Manufacturer Note: 58mm
- Position: Rear Driver Side
- Replaces: F57Z-3254-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2011 Mercury Mariner | Base, Hybrid, Premier | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS

Mercury Mariner Wheel Seal

Welcome to our website where you can discover high-quality, genuine Mercury Mariner Wheel Seal. We offer an extensive inventory of OEM Mercury Mariner Wheel Seal at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.

Mercury Mariner Wheel Seal Parts and Q&A

Axle Seal, Rear Driver Side
5L8Z-4B416-AA
Q: How to Service the LH Halfshaft Wheel Seal on Mercury Mariner?
A: When changing the LH halfshaft seal, make sure that the vehicle is in neutral on a hoist. Take off the front LH halfshaft, stab the seal with a hole, and with a dent puller, take the seal off. Install a new seal using a seal installer, reconnect the halfshaft and fill the transmission with fluid.