How to service the Air Bag Sensor located in the B-pillar on Mercury Milan?

Service of the B-pillar side impact sensor begins with disabling the SRS system. The service begins by removing scuff plate trim pieces from both front and rear doors before sliding down the lower B-pillar trim to detach it from the upper B-pillar trim. Cut the electrical wire connection of the side impact sensor. The restraints control module RCM along with the impact sensor require proper torque tightening because this action improves restraint system performance which reduces crash-related injuries. Clean the mating surfaces on the B-pillar joint with side impact sensor while removing any foreign matter. Document the sensor position and its locating tab before reinstalltion. The bolt and side impact sensor need removal before installing a new sensor which must get tightened to 12 Nm (9 lb-ft). Repeated steps in reverse order will enable the installation of components followed by restart of SRS operation.

OEM Mercury Milan Air Bag Sensor

Air Bag Impact Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Air Bag Sensors found

View related parts
Mercury Milan Side Impact Sensor, Front
Part Number: CT4Z-14B345-A
$34.63 MSRP: $49.12
You Save: $14.49 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Side Air Bag; Air Bag Impact Sensor, Center, Center Front, Front; Air Bag Sensor; Side Sensor
- Position: Front
- Replaces: AE9Z-14B345-A, DR3Z-14B345-B, AE9Z-14B345-B, DR3Z-14B345-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2011 Mercury Milan | Hybrid | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
Mercury Milan Impact Sensor, Rear
Part Number: 9L3Z-14B345-A
$43.95 MSRP: $63.97
You Save: $20.02 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Side Air Bag; Air Bag Impact Sensor, Center Front, Center Rear, Front, Rear; Air Bag Sensor; Front Impact Sensor; Front Sensor; Side Impact Sensor; Side Sensor
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2011 Mercury Milan | Base, Hybrid, Premier | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX
View related parts
Mercury Milan Diagnostic Module
Part Number: AE5Z-14B321-B
$276.39 MSRP: $379.21
You Save: $102.82 (28%)
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly - Airbag; Air Bag Control Module; Diagnostic Unit
- Replaces: 9E5Z-14B321-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010 Mercury Milan | Hybrid | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
Mercury Milan Diagnostic Module
Part Number: AE5Z-14B321-A
$437.13 MSRP: $685.37
You Save: $248.24 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly - Airbag; Air Bag Control Module; Diagnostic Unit
- Replaces: 9E5Z-14B321-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010 Mercury Milan | Base, Premier | 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX
View related parts
Mercury Milan Side Impact Sensor
Part Number: 9E5Z-14B345-A
$30.33 MSRP: $41.27
You Save: $10.94 (27%)
ADD TO CART
Product Specifications
- Other Name: Sensor - Side Air Bag; Air Bag Impact Sensor; Air Bag Sensor; Side Sensor
- Replaces: 6E5Z-14B345-AA, 8E5Z-14B345-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2009 Mercury Milan | Base, Premier | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
Mercury Milan Front Sensor
Part Number: 9E5Z-14B004-A
Product Specifications
- Other Name: Sensor Assembly; Air Bag Sensor
- Position: Front
- Replaces: 8E5Z-14B004-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2009 Mercury Milan | Base, Premier | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
Mercury Milan Front Sensor
Part Number: 6E5Z-14B004-A
Product Specifications
- Other Name: Sensor Assembly; Air Bag Impact Sensor, Front; Air Bag Sensor
- Position: Front
- Replaces: 6E5Z-14B004-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2007 Mercury Milan | Base, Premier | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS

Mercury Milan Air Bag Sensor

Welcome to our website where you can discover high-quality, genuine Mercury Milan Air Bag Sensor. We offer an extensive inventory of OEM Mercury Milan Air Bag Sensor at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.

Mercury Milan Air Bag Sensor Parts Questions & Experts Answers

Side Impact Sensor
9E5Z-14B345-A
Q: How to service the Air Bag Sensor located in the B-pillar on Mercury Milan?
A: Service of the B-pillar side impact sensor begins with disabling the SRS system. The service begins by removing scuff plate trim pieces from both front and rear doors before sliding down the lower B-pillar trim to detach it from the upper B-pillar trim. Cut the electrical wire connection of the side impact sensor. The restraints control module RCM along with the impact sensor require proper torque tightening because this action improves restraint system performance which reduces crash-related injuries. Clean the mating surfaces on the B-pillar joint with side impact sensor while removing any foreign matter. Document the sensor position and its locating tab before reinstalltion. The bolt and side impact sensor need removal before installing a new sensor which must get tightened to 12 Nm (9 lb-ft). Repeated steps in reverse order will enable the installation of components followed by restart of SRS operation.