How to remove and replace the engine mount on Mercury Milan?

Starting the task to replace or remove the engine mount requires positioning the vehicle on a hoist with neutral gear selected. Start by taking off the engine coolant degas bottle followed by attaching the engine support bar at the front and rear engine lifting eyes. The procedure for installment and removal requires you to detach both the bolt and radio frequency interference capacitor then tighten the bolt to 10 Nm (89 lb-in) before reinstalling. The engine mount bracket bolt requires tightening to 115 Nm (85 lb-ft) when installing the part. Lift the engine using the engine support bar to 25 mm (0.98 in) then take out the two engine mount bracket nuts before torquing them to 103 Nm (76 lb-ft). Next remove the engine mount securing nut and bolts and follow the installation by tightening them to 55 Nm (41 lb-ft). You should lower the engine by 25 mm (0.98 in) before you take out the engine mount bracket to avoid A/C tube contact with the bracket. Reverse the process of removal for reinstallation of the components.

OEM Mercury Milan Engine Mount

Engine Motor Mount

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

31 Engine Mounts found

View related parts
Mercury Milan Front Mount, Passenger Side Part Number: 6E5Z-6038-CK
$68.91 MSRP: $100.30
You Save: $31.39 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator Assembly; Engine Mount, Front; Engine Mount Bracket; Motor Mount; Mount
- Manufacturer Note: Requires Multiple Replacment Parts
- Position: Front Passenger Side
- Replaced by: 9E5Z-6038-F
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2009 Mercury Milan | Base, Premier | 4 Cyl 2.3 L GAS
View related parts
Mercury Milan Transmission Mount Part Number: 9E5Z-6038-A
$80.12 MSRP: $116.62
You Save: $36.50 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator Assembly; Automatic Transmission Mount; Manual Transmission Mount; Transfer Case Mount
- Replaces: 6E5Z-6038-CB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2011 Mercury Milan | Base, Premier | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS
View related parts
Mercury Milan Transmission Mount, Driver Side Part Number: 6H6Z-6038-BA
$80.12 MSRP: $116.62
You Save: $36.50 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator Assembly; Automatic Transmission Mount; Transfer Case Mount
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2009 Mercury Milan | Base, Premier | 6 Cyl 3.0 L GAS
View related parts
Mercury Milan Front Mount Part Number: 6E5Z-6038-DF
$111.64 MSRP: $162.50
You Save: $50.86 (32%)
ADD TO CART
Product Specifications
- Other Name: Bracket; Engine Mount, Front; Engine Mount Bracket; Motor Mount; Mount
- Position: Front
- Replaces: 6E5Z-6038-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2009 Mercury Milan | Base, Premier | 6 Cyl 3.0 L GAS
View related parts
Mercury Milan Strut Assembly, Lower Part Number: 9E5Z-6068-D
$56.87 MSRP: $82.78
You Save: $25.91 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Housing; Engine Torque Strut, Lower; Engine Support Rod; Engine Mount Torque Strut; Engine Mount Bracket; Motor Mount; Torque Strut; Strut
- Position: Lower
- Replaces: 7E5Z-6068-BA, 8E5Z-6068-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2011 Mercury Milan | Base, Premier | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Mercury Milan Torque Strut, Lower Part Number: 9E5Z-6068-C
$37.68 MSRP: $52.13
You Save: $14.45 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Housing; Engine Torque Strut, Lower; Engine Mount Torque Strut; Engine Mount Bracket; Motor Mount; Strut
- Position: Lower
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2011 Mercury Milan | Base, Premier | 4 Cyl 2.5 L GAS
View related parts
Mercury Milan Strut Assembly Part Number: 8E5Z-6068-D
$56.76 MSRP: $82.62
You Save: $25.86 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Housing; Engine Torque Strut; Engine Support Rod; Engine Mount Torque Strut; Engine Mount Bracket; Motor Mount; Torque Strut; Strut
- Replaces: 6E5Z-6068-FC, 6E5Z-6068-B, 6E5Z-6068-A, 8E5Z-6068-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2009 Mercury Milan | Base, Premier | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
Mercury Milan Transmission Mount, Upper Part Number: 8H6Z-6038-A
$83.62 MSRP: $121.72
You Save: $38.10 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator Assembly; Automatic Transmission Mount, Upper; Transfer Case Mount
- Position: Upper
- Replaces: 7H6Z-6038-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2011 Mercury Milan | Premier | 6 Cyl 3.0 L FLEX
View related parts
Mercury Milan Front Mount Part Number: 9E5Z-6038-C
$69.49 MSRP: $101.15
You Save: $31.66 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket - Engine Front Support; Engine Mount, Front; Engine Mount Bracket; Motor Mount; Mount
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2011 Mercury Milan | Hybrid | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
Mercury Milan Mount Bracket Part Number: 9E5Z-6061-D
$46.10 MSRP: $63.78
You Save: $17.68 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket - Engine Support; Engine Mount Bracket; Motor Mount
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2011 Mercury Milan | Premier | 6 Cyl 3.0 L FLEX
View related parts
Mercury Milan Transmission Mount Bracket, Driver Side Part Number: 6E5Z-6031-GA
Product Specifications
- Other Name: Bracket - Engine Mounting; Automatic Transmission Mount Bracket; Transfer Case Mount; Transmission Mount
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2009 Mercury Milan | Base, Premier | 6 Cyl 3.0 L GAS
View related parts
Mercury Milan Transmission Mount Bracket, Upper Part Number: 6E5Z-6031-HA
Product Specifications
- Other Name: Bracket - Engine Mounting; Manual Transmission Mount Bracket, Upper; Transfer Case Mount; Transmission Mount
- Position: Upper
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2011 Mercury Milan | Base, Premier | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS
View related parts
Mercury Milan Damper Part Number: 6E5Z-6F028-B
Product Specifications
- Other Name: Damper Assembly; Motor Mount
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2009 Mercury Milan | Base, Premier | 4 Cyl 2.3 L GAS
View related parts
Mercury Milan Transmission Mount Bracket Part Number: 8E5Z-6031-A
Product Specifications
- Other Name: Bracket - Engine Mounting; Transfer Case Mount; Transmission Mount
- Replaces: 6E5Z-6031-JA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2009 Mercury Milan | Base, Premier | 4 Cyl 2.3 L GAS
View related parts
Mercury Milan Transmission Mount Bracket Part Number: 9E5Z-6038-B
Product Specifications
- Other Name: Insulator Assembly - Engine; Automatic Transmission Mount Bracket; Transfer Case Mount; Insulator Assembly - Engine Support; Transmission Mount
- Replaced by: BE5Z-6038-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2011 Mercury Milan | Hybrid | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
Mercury Milan Transmission Mount Part Number: BE5Z-6038-B
Product Specifications
- Other Name: Insulator Assembly - Engine Support; Automatic Transmission Mount; Transfer Case Mount; Transmission Mount Bracket
- Replaces: 9E5Z-6038-D, 9E5Z-6038-B, BE5Z-6038-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2011 Mercury Milan | Hybrid | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
Mercury Milan Transmission Mount Part Number: BE5Z-6038-A
Product Specifications
- Other Name: Insulator Assembly; Transfer Case Mount
- Replaced by: BE5Z-6038-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2011 Mercury Milan | Hybrid | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
Mercury Milan Transmission Mount Bracket, Upper Part Number: 9E5Z-6031-A
Product Specifications
- Other Name: Bracket - Engine Mounting; Automatic Transmission Mount Bracket, Upper; Transfer Case Mount; Transmission Mount
- Position: Upper
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2011 Mercury Milan | Base, Premier | 4 Cyl 2.5 L GAS
View related parts
Mercury Milan Transmission Mount Bracket Part Number: 9E5Z-6031-B
Product Specifications
- Other Name: Bracket - Engine Mounting; Automatic Transmission Mount Bracket; Transfer Case Mount; Transmission Mount
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2011 Mercury Milan | Premier | 6 Cyl 3.0 L FLEX
View related parts
Mercury Milan Mount Bracket, Front Part Number: 9E5Z-6061-B
Product Specifications
- Other Name: Bracket - Engine Support; Engine Mount Bracket, Front; Motor Mount; Engine Mount Bracket
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2011 Mercury Milan | Hybrid | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV)

| Page 1 of 2 |Next >

1-20 of 31 Results

Mercury Milan Engine Mount

OEM Engine Mount boasts unmatched quality. Each part goes through full quality checks. They adhere to Mercury's official factory standards. These steps remove flaws and inconsistencies. So you can get Engine Mount with long life and a perfect fit. Come to our website and find genuine Mercury Milan parts. We keep a wide inventory of OEM Milan parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

Mercury Milan Engine Mount is an important part which has been used in the vehicles of Mercury Milan which is very famous for its quality and performance. Intended to reduce noise and vibration providing a secure attachment point for the engine and transaxle, this Engine Mount delivers of the optimal driving experience. Designed for different Mercury Milan models manufactured between 2006 and 2011, it contributes to improved vehicle performance due to accurate positioning of the engine which is crucial for non-damage of other parts. The Mercury Milan Engine Mount includes several types of suspension attachments, such as traditional rubber ones, fluid filled hydraulic ones, and moreover, the highly developed electronic active ones, which change their stiffness according to the speed of the engine. This has the positive added affect of enhancing stability as well as contributing to ride comfort and thus makes Mercury Milan stand out in the market. Moreover, owing to the higher and heavier duty construction, the failure of Engine Mount due to age or adverse condition are controlled. Therefore, the Mercury Milan Engine Mount is more than just a replacement part; it is an improvement system that greatly enhances the safety and performance of the car making it among the prime recommendation for owners of Mercury Milan vehicle.

Mercury Milan Engine Mount Parts and Q&A

Transmission Mount, Driver Side
6H6Z-6038-BA
Q: How to remove and replace the engine mount on Mercury Milan?
A:
Starting the task to replace or remove the engine mount requires positioning the vehicle on a hoist with neutral gear selected. Start by taking off the engine coolant degas bottle followed by attaching the engine support bar at the front and rear engine lifting eyes. The procedure for installment and removal requires you to detach both the bolt and radio frequency interference capacitor then tighten the bolt to 10 Nm (89 lb-in) before reinstalling. The engine mount bracket bolt requires tightening to 115 Nm (85 lb-ft) when installing the part. Lift the engine using the engine support bar to 25 mm (0.98 in) then take out the two engine mount bracket nuts before torquing them to 103 Nm (76 lb-ft). Next remove the engine mount securing nut and bolts and follow the installation by tightening them to 55 Nm (41 lb-ft). You should lower the engine by 25 mm (0.98 in) before you take out the engine mount bracket to avoid A/C tube contact with the bracket. Reverse the process of removal for reinstallation of the components.