How to Service and Repair a Shift Cable on Mercury Milan?

The repair process for gearshift cables requires the removal of heater core and evaporator core housing along with battery and battery tray. Clear the spring clip from the cables without damaging it before you remove the gearshift cables from the shift mechanism so you can pull the spring clip out while rotating it 90 degrees upward. The process demands gentle prying of the shift cable retainer while the cables must be disengaged from the transaxle bracket. First remove the clamp nut and gearshift cable clamp then extract the restraint control module (RCM) before positioning the insulation blanket to the side. Releasing the floor from the two gearshift cable nuts allows the cables to become free. The cable nuts need to be tightened to 8 Nm (71 inch lbs.) during reinstallation. Caution must be taken during cable removal from the shift lever assembly to protect retainer hardware before extracting the shift cables through the bulkhead to reach the interior. Put the grommet in with the arrow facing upward when placing cables through the dash panel for installation and follow the removal steps backwards when performing gearshift cable adjustments.

OEM Mercury Milan Shift Cable

Transmission Shift Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Shift Cables found

View related parts
Mercury Milan Shift Control Cable Part Number: 9E5Z-7E395-C
$34.64 MSRP: $49.13
You Save: $14.49 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly - Selector Lever Control; Automatic Transmission Shifter Cable; Cable
- Replaces: 9E5Z-7E395-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2011 Mercury Milan | Base, Premier | 4 Cyl 2.5 L GAS
View related parts
Mercury Milan Shift Control Cable Part Number: AE5Z-7E395-G
$91.94 MSRP: $133.83
You Save: $41.89 (32%)
ADD TO CART
Product Specifications
- Other Name: Cable Assembly - Selector Lever Control; Automatic Transmission Shifter Cable; Cable
- Replaces: 6E5Z-7E395-EA, AE5Z-7E395-E
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2011, 2006-2009 Mercury Milan | Base, Premier | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Mercury Milan Shift Control Cable, Center Part Number: 9E5Z-7E395-AA
$134.77 MSRP: $196.17
You Save: $61.40 (32%)
ADD TO CART
Product Specifications
- Other Name: Cable Assembly - Selector Lever Control; Manual Transmission Shifter Linkage; Automatic Shifter Cable; Cable
- Position: Center
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2011 Mercury Milan | Base, Premier | 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX
View related parts
Mercury Milan Shift Control Cable Part Number: 6E5Z-7E395-D
$121.67 MSRP: $177.10
You Save: $55.43 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly - Selector Lever Control
- Replaces: 6E5Z-7E395-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2009 Mercury Milan | Base, Premier | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
Mercury Milan Shift Control Cable Part Number: AE5Z-7E395-F
$93.08 MSRP: $135.48
You Save: $42.40 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly - Selector Lever Control; Automatic Transmission Shifter Cable; Cable
- Replaces: AE5Z-7E395-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2011 Mercury Milan | Premier | 6 Cyl 3.0 L FLEX
View related parts
Mercury Milan Shift Control Cable Part Number: 6E5Z-7E395-E
Product Specifications
- Other Name: Cable Assembly - Selector Lever Control; Automatic Transmission Shifter Cable; Cable
- Replaces: 6E5Z-7E395-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2009 Mercury Milan | Base, Premier | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
Mercury Milan Shift Control Cable Part Number: 9E5Z-7E395-D
Product Specifications
- Other Name: Cable Assembly - Selector Lever Control; Automatic Transmission Shifter Cable; Cable
- Replaces: 9E5Z-7E395-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2011 Mercury Milan | Hybrid | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV)

Mercury Milan Shift Cable

OEM Shift Cable boasts unmatched quality. Each part goes through full quality checks. They adhere to Mercury's official factory standards. These steps remove flaws and inconsistencies. So you can get Shift Cable with long life and a perfect fit. Come to our website and find genuine Mercury Milan parts. We keep a wide inventory of OEM Milan parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

Mercury Milan Shift Cable Parts and Q&A

Shift Control Cable
AE5Z-7E395-G
Q: How to Service and Repair a Shift Cable on Mercury Milan?
A:
The repair process for gearshift cables requires the removal of Heater Core and evaporator core housing along with battery and battery tray. Clear the spring clip from the cables without damaging it before you remove the gearshift cables from the shift mechanism so you can pull the spring clip out while rotating it 90 degrees upward. The process demands gentle prying of the shift cable retainer while the cables must be disengaged from the transaxle bracket. First remove the clamp nut and gearshift cable clamp then extract the restraint control module (RCM) before positioning the insulation blanket to the side. Releasing the floor from the two gearshift cable nuts allows the cables to become free. The cable nuts need to be tightened to 8 Nm (71 inch lbs.) during reinstallation. Caution must be taken during cable removal from the shift lever assembly to protect retainer hardware before extracting the shift cables through the bulkhead to reach the interior. Put the grommet in with the arrow facing upward when placing cables through the dash panel for installation and follow the removal steps backwards when performing gearshift cable adjustments.