How to service the coolant reservoir on Mercury Montego?

A proper service of coolant reservoir starts with emptying the cooling system. The first step involves disconnecting the upper degas bottle hose followed by setting it aside before removing and positioning aside the lower degas bottle hose. You should next disconnect the electrical connection from the degas bottle device. Extract the two degas bottle bolts before removing the degas bottle from its place. Proper installation of the new degas bottle requires tightening the bolts to 9 Nm while mirroring the removal steps. The service ends with filling and bleeding the cooling system.

OEM Mercury Montego Coolant Reservoir

Coolant Tank Reservoir

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Coolant Reservoir found

View related parts
Mercury Montego Reservoir
Part Number: 5F9Z-8A080-AB
Product Specifications
- Other Name: Tank Assembly - Radiator Overflow; Engine Coolant Reservoir; Coolant Reservoir
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Mercury Montego | Luxury, Premier | 6 Cyl 3.0 L GAS

Mercury Montego Coolant Reservoir

Welcome to our website where you can discover high-quality, genuine Mercury Montego Coolant Reservoir. We offer an extensive inventory of OEM Mercury Montego Coolant Reservoir at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.

Mercury Montego Coolant Reservoir Parts Questions & Experts Answers

Reservoir
5F9Z-8A080-AB
Q: How to service the coolant reservoir on Mercury Montego?
A: A proper service of coolant reservoir starts with emptying the cooling system. The first step involves disconnecting the upper degas bottle hose followed by setting it aside before removing and positioning aside the lower degas bottle hose. You should next disconnect the electrical connection from the degas bottle device. Extract the two degas bottle bolts before removing the degas bottle from its place. Proper installation of the new degas bottle requires tightening the bolts to 9 Nm while mirroring the removal steps. The service ends with filling and bleeding the cooling system.