How to service and repair the ignition switch on Mercury Monterey?

Depower the SRS, take off steering column cover and disassemble electrical connector to fix the ignition switch. Disassemble the two bolts, fit in the new switch and loosen the bolts to 6 Nm (53 inch lbs. ). Installation can be reversed by following the procedure of removal.

OEM Mercury Monterey Ignition Switch

Starter Ignition Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Ignition Switches found

View related parts
Mercury Monterey Ignition Switch Part Number: F4DZ-11572-B
$46.77 MSRP: $75.45
You Save: $28.68 (39%)
ADD TO CART
Product Specifications
- Other Name: Switch Assembly - Ignition
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2004 Mercury Monterey | Base, Premier | 6 Cyl 4.2 L GAS
View related parts
Mercury Monterey Ignition Switch Part Number: 5C3Z-11572-AA
$45.55 MSRP: $72.33
You Save: $26.78 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly - Ignition
- Manufacturer Note: SWITCH, IGNITION ASM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Mercury Monterey | Convenience, Luxury, Premier | 6 Cyl 4.2 L GAS

Mercury Monterey Ignition Switch

Welcome to our website where you can discover high-quality, genuine Mercury Monterey Ignition Switch. We offer an extensive inventory of OEM Mercury Monterey Ignition Switch at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.

Mercury Monterey Ignition Switch Parts and Q&A

Ignition Switch
5C3Z-11572-AA
Q: How to service and repair the ignition switch on Mercury Monterey?
A: Depower the SRS, take off Steering Column Cover and disassemble electrical connector to fix the ignition switch. Disassemble the two bolts, fit in the new switch and loosen the bolts to 6 Nm (53 inch lbs. ). Installation can be reversed by following the procedure of removal.