Other Name: Hose Assembly; Power Steering Hose; Pressure Hose
Manufacturer Note: Pump to gear (pressure)- Part is longer than original to reduce a noise concern. Part is correct replacement. - Refer to TSB 98-21-1, SOHC
Replaces: F87Z-3A719-HA
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
Fits the following Vehicles:
1998-2001 Mercury Mountaineer | Base | 6 Cyl 4.0 L GAS
Other Name: Tube Assembly; Power Steering Hose; Return Hose; Lower Return Hose
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
Fits the following Vehicles:
1998-2000 Mercury Mountaineer | Base | 6 Cyl 4.0 L GAS
Mercury Mountaineer Power Steering Hose
Welcome to our website where you can discover high-quality, genuine Mercury Mountaineer Power Steering Hose. We offer an extensive inventory of OEM Mercury Mountaineer Power Steering Hose at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.
Mercury Mountaineer Power Steering Hose Parts and Q&A
Q: How to Service and Repair a Power Steering Hose from the Fluid Cooler to the Reservoir on Mercury Mountaineer?
A: In order to repair the power steering line, place the vehicle in neutral onto a hoist and empty the reservoir. Unscrew the hoses that are connected to fluid cooler and reservoir. Undo the procedure to install and refill the system using the right fluid and also care not to have any contaminants in the system to prevent component failure.
Q: How to Service and Repair a Power Steering Hose from the Steering Gear to the Fluid Cooler on Mercury Mountaineer?
A: Repair of steering gear to fluid cooler return hose To empty power steering fluid, hoist the vehicle in neutral. Take off the steering line clamp plate nut and make sure it is tightened up to 25 Nm. Install new O-rings, strip away the return hose and repeat the process to re-install and re-fill the system.