Other Name: Switch Assembly - Front Door; Door Lock Switch, Front, Front Left, Front Right, Rear, Rear Left, Rear Right; Switch Assembly - Front Door - Central; Door Lock Switch
Position: Driver Side
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
Fits the following Vehicles:
2000-2005 Mercury Sable | GS, LS, LS Premium, Platinum Edition | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
Fits the following Vehicles:
2000-2005 Mercury Sable | GS, LS, LS Premium | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
Mercury Sable Door Jamb Switch
Welcome to our website where you can discover high-quality, genuine Mercury Sable Door Jamb Switch. We offer an extensive inventory of OEM Mercury Sable Door Jamb Switch at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.
Q: How to service the front door jamb switch on Mercury Sable?
A: In order to service the front door ajar switch, take out the door trim panel and watershield. Unplug the interior handle cable, window glass run channel bolt and exterior handle rod. Eliminate door latch bolts and electrical connectors. Loosen the locking tab, turn the switch counterclockwise and put it back by reversing the directions.
Q: How to Service the Door Jamb Switch for the Alarm on Mercury Sable?
A: In order to service the door disarm switch, you must disconnect the battery, the door trim panel and watershield and disconnect the latch lever. Before taking off the switch, mark its position. Once the electrical connector has been pulled off, install the new switch with reference marks and then undo the steps that you have done.