How to Service the Heated Oxygen Sensor on Mercury Sable?

Start the service of Heated Oxygen Sensor (HO2S) by first securing the vehicle on a hoist using neutral gear position. The electrical connector of the HO2S must be disconnected. Penetrating and lock lubricant serves to minimize resistance when removing the sensor by applying it to its threads. The Exhaust Gas Oxygen Sensor Socket enables you to remove the HO2S while following torque calculations for the specified torque level. Work through the following steps for new HO2S installation while applying light anti-seize lubrication to its threads then tight the sensor to 48 Nm (35 lb-ft). Continue by performing the removal steps in opposite order to finish the installation.

OEM Mercury Sable Oxygen Sensor

Oxygen O2 Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Oxygen Sensors found

View related parts
Mercury Sable Oxygen Sensor, Rear Driver Side Part Number: GU2Z-9G444-A
$57.57 MSRP: $94.73
You Save: $37.16 (40%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Sensor - Exhaust Gas - Oxygen; Oxygen Sensor, Front, Front Left, Front Right, Rear, Rear Left, Rear Right
- Position: Rear Driver Side
- Replaces: F1TZ-9F472-A, F85Z-9G444-AA, F88Z-9F472-AA, 1R3Z-9G444-AA, 1R3Z-9G444-BA, DY-1081, F4DZ-9F472-A, 5C5Z-9F472-AA, 5C5Z-9F472-BA, 5F9Z-9G444-BA, 5W6Z-9G444-BA, 6E5Z-9G444-AA, F85Z-9G444-AB, F85Z-9G444-E, F88Z-9F472-AB, 6L7Z-9F472-BA, 5W6Z-9G444-AA, DY-1091, DY-1086, DY-1087, DY-1053, DY-1060, DY-800, DY-831, DY-832, DY-1034, DY-661, DY-731, DY-1040, F4SZ-9F472-A, DY-1057, DY-1104, DY-1039, F1SZ-9F472-B, DY-1038, DY-1089, DY-1093, DY-649, DY-1063, DY-1005, DY-761, F1SZ-9F472-A, DY-703, F3UZ-9F472-A, F4ZZ-9F472-C, F5AZ-9G444-B, F4SZ-9F472-D, F6DZ-9G444-B, F4UZ-9F472-A, F5UZ-9F472-A, F4DZ-9F472-B, F78Z-9F472-AA, F7RZ-9G444-BA, F75Z-9G444-AA, F5WZ-9F472-BA, F6DZ-9G444-AA, F88Z-9F472-BA, F75Z-9G444-BA, F77Z-9F472-BA, F8RZ-9G444-BB, F5MZ-9F472-AA, F78Z-9F472-BA, DY-1058, F6DZ-9G444-EA, FOTZ-9F472-A, XR3Z-9G444-EA, XC2Z-9F472-BA, XR3Z-9G444-JA, XR3Z-9G444-HA, XR3Z-9G444-BB, XC2Z-9F472-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1990-2005 Mercury Sable | G, GS, LS, LS Premium, LTS, Platinum Edition | 3.0L V6, 3.8L V6, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS
View related parts
Mercury Sable Oxygen Sensor, Rear Driver Side Part Number: 5F9Z-9G444-AB
$66.85 MSRP: $110.00
You Save: $43.15 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Exhaust Gas - Oxygen; Oxygen Sensor, Rear, Rear Left; Rear Oxygen Sensor; Lower Oxygen Sensor
- Position: Rear Driver Side
- Replaces: 5F9Z-9G444-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2009 Mercury Sable | Base, Premier | 6 Cyl 3.5 L GAS
View related parts
Mercury Sable Oxygen Sensor, Front Part Number: 8F9Z-9F472-A
$88.51 MSRP: $145.64
You Save: $57.13 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Hego; Oxygen Sensor, Front; Wideband Air/Fuel Sensor; Air/Fuel Sensor; Front Oxygen Sensor; Upper Oxygen Sensor
- Manufacturer Note: Front Or Rear
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2009 Mercury Sable | Base, Premier | 6 Cyl 3.5 L GAS
View related parts
Mercury Sable Oxygen Sensor, Front Part Number: 7T4Z-9F472-A
$48.19 MSRP: $78.73
You Save: $30.54 (39%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Hego; Oxygen Sensor, Front; Front Oxygen Sensor; Upper Oxygen Sensor
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2009 Mercury Sable | Base, Premier | 6 Cyl 3.5 L GAS
View related parts
Mercury Sable Oxygen Sensor Part Number: F5MZ-9F472-B
$58.92 MSRP: $98.73
You Save: $39.81 (41%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Hego
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1996-1999 Mercury Sable | G, GS, LS, LS Premium | 6 Cyl 3.0 L GAS
View related parts
Mercury Sable Oxygen Sensor Part Number: XC2Z-9F472-BB
$61.73 MSRP: $103.64
You Save: $41.91 (41%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Hego
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1999 Mercury Sable | GS, LS | 6 Cyl 3.0 L GAS
View related parts
Mercury Sable Oxygen Sensor Part Number: FOTZ-9F472-E
Product Specifications
- Other Name: Sensor - Hego
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1986 Mercury Sable | GS | 4 Cyl 2.5 L GAS

Mercury Sable Oxygen Sensor

OEM Oxygen Sensor boasts unmatched quality. Each part goes through full quality checks. They adhere to Mercury's official factory standards. These steps remove flaws and inconsistencies. So you can get Oxygen Sensor with long life and a perfect fit. Come to our website and find genuine Mercury Sable parts. We keep a wide inventory of OEM Sable parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

Mercury Sable Oxygen Sensor Parts and Q&A

Oxygen Sensor, Front
8F9Z-9F472-A
Q: How to Service the Heated Oxygen Sensor on Mercury Sable?
A:
Start the service of Heated Oxygen Sensor (HO2S) by first securing the vehicle on a hoist using neutral gear position. The electrical connector of the HO2S must be disconnected. Penetrating and lock lubricant serves to minimize resistance when removing the sensor by applying it to its threads. The Exhaust Gas Oxygen Sensor Socket enables you to remove the HO2S while following torque calculations for the specified torque level. Work through the following steps for new HO2S installation while applying light anti-seize lubrication to its threads then tight the sensor to 48 Nm (35 lb-ft). Continue by performing the removal steps in opposite order to finish the installation.