How to Service the Camshaft Position Sensor on Mercury Sable?

Start the process of servicing the Camshaft Position (CMP) Sensor by eliminating the battery ground cable from service. The first step requires users to remove the accelerator cable snow shield through pin-type retainer detachment. Remove the spark plugs wire retainer and the wiring harness from the position where it attaches to the intake manifold support. The absence of the upper intake manifold for clearness requires you to drop the fuel charging wiring harness from the valve cover studs before placing it outside the CMP sensor area. Reposition the sensor by removing its electrical connector followed by untightening its screw. When reinstalling the valve cover stud fuel charging wiring harness make sure it is fastened securely in place during the process. The CMP sensor installation procedure is the reverse of its removal steps.

OEM Mercury Sable Camshaft Position Sensor

Cam Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Camshaft Position Sensors found

View related parts
Mercury Sable Camshaft Position Sensor Part Number: AT4Z-6B288-A
$33.09 MSRP: $52.55
You Save: $19.46 (38%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly; Engine Camshaft Position Sensor; Camshaft Sensor
- Replaces: 7T4Z-6B288-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2009 Mercury Sable | Base, Premier | 6 Cyl 3.5 L GAS
View related parts
Mercury Sable Camshaft Position Sensor Part Number: 1W7Z-6B288-AB
$31.26 MSRP: $49.64
You Save: $18.38 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly; Engine Camshaft Position Sensor; Camshaft Sensor; Position Sensor; Camshaft Position Sen
- Replaces: 1W7Z-6B288-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1996-1999 Mercury Sable | GS, LS, LS Premium | 6 Cyl 3.0 L GAS
View related parts
Mercury Sable Camshaft Position Sensor Part Number: 1F1Z-6B288-AB
$24.27 MSRP: $38.55
You Save: $14.28 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly; Engine Camshaft Position Sensor; Camshaft Sensor
- Replaces: 1F1Z-6B288-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1996-2005 Mercury Sable | G, GS, LS, LS Premium, Platinum Edition | 6 Cyl 3.0 L GAS
View related parts
Mercury Sable Camshaft Position Sensor Part Number: 1F1Z-6B288-BA
$30.39 MSRP: $49.33
You Save: $18.94 (39%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly; Engine Camshaft Position Sensor; Camshaft Sensor
- Replaces: XF1Z-12A112-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1999-2005 Mercury Sable | GS, LS, LS Premium, Platinum Edition | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS

Mercury Sable Camshaft Position Sensor

OEM Camshaft Position Sensor boasts unmatched quality. Each part goes through full quality checks. They adhere to Mercury's official factory standards. These steps remove flaws and inconsistencies. So you can get Camshaft Position Sensor with long life and a perfect fit. Come to our website and find genuine Mercury Sable parts. We keep a wide inventory of OEM Sable parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

The Mercury Sable part named as 'Camshaft Position Sensor' is an important and one of the most reliable part having compatibility with a number of Sable models. This sensor pays close attention to the position and the speed of the camshaft; it then feeds the ECM with important info as regards to fuel injection and ignition phases. By making certain that the camshaft and crankshaft are positioned correctly, the Camshaft Position Sensor is instrumental in improving the vehicle's performance, as well as ensuring the car's safety especially the models with the variable valve timing. It is usually positioned at a convenient location above the camshaft or near the engine block, to give accurate readings which are crucial in ensuring that the car gives optimal performance. The Mercury Sable which is a mid-size sedance manufactured by Mercury, a Ford division has gone through five generations due to technological and design improvements of which the Camshaft Position Sensor was added. The efficiency and sturdiness of this sensor afford the Sable brand the reputation of a reliable car. Out of all the automotive products in the industry, the Camshaft Position Sensor emerges as a top product because with its compatibility which enables it to work well in almost all the Sable models out there; hereby guaranteeing Sable drivers a better performance and reliability. Therefore, it is significant to maintain and perform services on the Camshaft Position Sensor because any failure will result to a decline in the performance of the car and thus is vital in the operation of the Mercury Sable.

Mercury Sable Camshaft Position Sensor Parts and Q&A

Camshaft Position Sensor
1F1Z-6B288-AB
Q: How to Service the Camshaft Position Sensor on Mercury Sable?
A:
Start the process of servicing the Camshaft Position (CMP) Sensor by eliminating the battery ground cable from service. The first step requires users to remove the accelerator cable snow shield through pin-type retainer detachment. Remove the spark plugs wire retainer and the wiring harness from the position where it attaches to the intake manifold support. The absence of the upper intake manifold for clearness requires you to drop the fuel charging wiring harness from the valve cover studs before placing it outside the CMP sensor area. Reposition the sensor by removing its electrical connector followed by untightening its screw. When reinstalling the valve cover stud fuel charging wiring harness make sure it is fastened securely in place during the process. The CMP sensor installation procedure is the reverse of its removal steps.