How to Service and Repair the Power Steering Hose from Pump to Steering Gear on Mercury Sable?

The first step for servicing the power steering pump to steering gear pressure line includes protecting the system components from foreign materials while also blocking power steering fluid contact with the engine accessory drive belt to stop belt failure. The service begins with removing the power steering pump then proceeding with disassembling the power steering pressure line bracket-to-rear engine bolt and tightening it to 10 Nm (89 lb-inch) for reassembly. The process continues with power steering pressure switch electrical connector removal from power steering pressure line followed by removing power steering pressure line bracket-to-valve cover stud nut before tightening it to 10 Nm (89 lb-inch) at installation. The power steering pressure line bracket must be detached from the steering gear bolt before its reinstallation while applying torque to 25 Nm (18 lb-ft). Security requires removing the clamp plate bolt from power steering line and rotating the clamp plate while disconnecting the pressure line from the steering gear before reinstalling it with proper torque to 25 Nm (18 lb-ft). Eliminate the equipment according to installation protocols to finalize the work.

OEM Mercury Sable Power Steering Hose

Power Steering Pressure Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

34 Power Steering Hoses found

View related parts
Mercury Sable Power Steering Return Hose Part Number: 8G1Z-3A713-C
Product Specifications
- Other Name: Tube Assembly; Power Steering Hose; Return Hose; Lower Return Hose; Upper Return Hose
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2009 Mercury Sable | Base, Premier | 6 Cyl 3.5 L GAS
View related parts
Mercury Sable Power Steering Return Hose Part Number: YF1Z-3A713-CA
Product Specifications
- Other Name: Hose Assembly; Power Steering Hose; Upper Return Hose
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2000-2005 Mercury Sable | GS, LS | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Mercury Sable Connector Tube, Upper Part Number: 5F9Z-3A719-B
Product Specifications
- Other Name: Hose Assembly; Power Steering Return Line End Fitting; Power Steering Pressure Hose, Upper; Power Steering Hose; Upper Hose; Upper Pipe
- Position: Upper
- Replaces: 7F9Z-3A719-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2009 Mercury Sable | Base, Premier | 6 Cyl 3.5 L GAS
View related parts
Mercury Sable Lower Return Tube Part Number: 8G1Z-3A713-E
Product Specifications
- Other Name: Hose Assembly - Gear To Reservoir; Power Steering Return Hose
- Replaced by: AG1Z-3A713-D
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2009 Mercury Sable | Base, Premier | 6 Cyl 3.5 L GAS
View related parts
Mercury Sable Power Steering Return Hose Part Number: F4DZ3A713B
Product Specifications
- Other Name: Hose Assembly; Power Steering Hose
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1994-1995 Mercury Sable | GS, LS | 6 Cyl 3.8 L GAS
View related parts
Mercury Sable Power Steering Pressure Hose Part Number: 1F1Z-3A719-AB
Product Specifications
- Other Name: Hose Assembly; Power Steering Hose; Pressure Hose
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2001 Mercury Sable | GS, LS | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Mercury Sable Power Steering Return Hose Part Number: 3F1Z-3A713-AA
Product Specifications
- Other Name: Tube Assembly; Power Steering Hose; Lower Return Hose; Upper Return Hose
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2000-2005 Mercury Sable | GS, LS, LS Premium, Platinum Edition | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Mercury Sable Power Steering Return Hose Part Number: AG1Z-3A713-D
Product Specifications
- Other Name: Hose Assembly - Gear To Reservoir; Power Steering Hose; Lower Return Tube; Upper Return Hose
- Replaces: 9G1Z-3A713-B, 8G1Z-3A713-F, AG1Z-3A713-A, 8G1Z-3A713-E, PSH-285
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2009 Mercury Sable | Base, Premier | 6 Cyl 3.5 L GAS
View related parts
Mercury Sable Pressure Line Part Number: F3DZ-3A714-A
Product Specifications
- Other Name: Tube - Connecting; Power Steering Hose; Tube
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1993-1995 Mercury Sable | GS, LS, LTS | 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS
View related parts
Mercury Sable Pressure Line Part Number: F3DZ-3A717-A
Product Specifications
- Other Name: Hose Assembly; Power Steering Hose; Tube
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1993-1995 Mercury Sable | GS, LS, LTS | 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS
View related parts
Mercury Sable Pressure Hose Part Number: F3DZ3A719E
Product Specifications
- Other Name: Hose Assembly - Pump To Steering; Power Steering Hose; Hose Assembly - Pump To Steering Gear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1993 Mercury Sable | GS, LS | 6 Cyl 3.0 L GAS
View related parts
Mercury Sable Power Steering Return Hose Part Number: F4DZ3A713D
Product Specifications
- Other Name: Tube Assembly; Power Steering Hose; Return Hose
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1994-1995 Mercury Sable | GS, LS | 6 Cyl 3.8 L GAS
View related parts
Mercury Sable Power Steering Pressure Hose Part Number: F4DZ3A719A
Product Specifications
- Other Name: Hose Assembly; Power Steering Hose; Pressure Hose
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1994-1995 Mercury Sable | GS, LS, LTS | 6 Cyl 3.0 L GAS
View related parts
Mercury Sable Power Steering Return Hose Part Number: F6DZ-3A713-A
Product Specifications
- Other Name: Hose Assembly; Power Steering Hose; Upper Return Hose
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1996-1999 Mercury Sable | G, GS, LS, LS Premium | 6 Cyl 3.0 L GAS
View related parts
Mercury Sable Power Steering Pressure Hose Part Number: F6DZ-3A719-A
Product Specifications
- Other Name: Hose Assembly; Power Steering Hose; Pressure Hose
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1996-1998 Mercury Sable | G, GS, LS, LS Premium | 6 Cyl 3.0 L GAS
View related parts
Mercury Sable Upper Return Hose Part Number: F8DZ-3A713-BB
Product Specifications
- Other Name: Tube Assembly; Power Steering Hose
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1997-1999 Mercury Sable | GS, LS, LS Premium | 6 Cyl 3.0 L GAS
View related parts
Mercury Sable Power Steering Pressure Hose Part Number: FODZ-3A719-F
Product Specifications
- Other Name: Hose Assembly - Pump To Steering; Power Steering Hose; Pressure Hose; Hose Assembly - Pump To Steering Gear
- Manufacturer Note: Hose asy, pressure. Has the hole for the F3TZ-3N824-A pressure switch., without VAPS
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1991-1993 Mercury Sable | GS, LS | 6 Cyl 3.0 L GAS
View related parts
Mercury Sable Power Steering Pressure Hose Part Number: XF1Z-3A719-CA
Product Specifications
- Other Name: Hose Assembly; Power Steering Hose; Pressure Hose
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1999 Mercury Sable | GS, LS | 6 Cyl 3.0 L GAS
View related parts
Mercury Sable Power Steering Pressure Hose Part Number: YF1Z-3A719-DA
Product Specifications
- Other Name: Hose Assembly; Power Steering Hose; Pressure Hose
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1999-2000 Mercury Sable | GS, LS | 6 Cyl 3.0 L GAS
View related parts
Mercury Sable Power Steering Pressure Hose Part Number: 9G1Z-3A719-B
Product Specifications
- Other Name: Hose Assembly; Power Steering Hose; Pressure Hose
- Replaces: 8G1Z-3A719-B, 8G1Z-3A719-C, 8G1Z-3A719-AF, PSH-53
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2009 Mercury Sable | Base, Premier | 6 Cyl 3.5 L GAS

| Page 1 of 2 |Next >

1-20 of 34 Results

Mercury Sable Power Steering Hose

OEM Power Steering Hose boasts unmatched quality. Each part goes through full quality checks. They adhere to Mercury's official factory standards. These steps remove flaws and inconsistencies. So you can get Power Steering Hose with long life and a perfect fit. Come to our website and find genuine Mercury Sable parts. We keep a wide inventory of OEM Sable parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

The Mercury Sable Power Steering Hose is essential a component that boosts the reliability and performance of the Mercury Sable's power steering. This hose is responsible for connecting the power steering pump with the steering gear so that the hydraulic fluid that enables easy steering can be channeled. Manufactured to be long lasting the Mercury Sable Power Steering Hose has extremely high pressure and the ability to stand up to the most challenging environments thus providing the much needed control on the road. Manufactured to be suitable for installation on many Mercury Sable vehicles, this High-Performance Power Steering Hose embraces the peculiarities of all the generations, ranging from the initial 1986 model to the final 2009 model. This gives it a strong structure that reduces the dangers of developing leaks, and reduces the wear of the seals which may cause increased steering effort as well as safety complications. In addition, Mercury Sable Power Steering Hose uses high pressure fitment for the connections to be well secured and the design gives way for proper positioning of the hose inorder not to hinder the other parts of the car. Thus, this carving and design of the space not only effectively improves the functionality of the steering system, but also raises the question of driving experience to higher level. Mercury Sable Power Steering Hose is one of the most reliable and powerful auto parts in the market which of course ensures that the Mercury Sable - a mid-size sedan car - continues to deliver its promise of efficiency and sturdiness in the market.

Mercury Sable Power Steering Hose Parts and Q&A

Reservoir Hose
9G1Z-3691-A
Q: How to Service and Repair the Power Steering Hose from Pump to Steering Gear on Mercury Sable?
A:
The first step for servicing the Power Steering Pump to steering gear pressure line includes protecting the system components from foreign materials while also blocking power steering fluid contact with the engine accessory drive belt to stop belt failure. The service begins with removing the power steering pump then proceeding with disassembling the power steering pressure line bracket-to-rear engine bolt and tightening it to 10 Nm (89 lb-inch) for reassembly. The process continues with power steering pressure switch electrical connector removal from power steering pressure line followed by removing power steering pressure line bracket-to-valve cover stud nut before tightening it to 10 Nm (89 lb-inch) at installation. The power steering pressure line bracket must be detached from the steering gear bolt before its reinstallation while applying torque to 25 Nm (18 lb-ft). Security requires removing the clamp plate bolt from power steering line and rotating the clamp plate while disconnecting the pressure line from the steering gear before reinstalling it with proper torque to 25 Nm (18 lb-ft). Eliminate the equipment according to installation protocols to finalize the work.