How to Address Bumper Issues on a Mercury Villager?

The procedure for repairing or servicing the front bumper cover starts with upper pin-type retainers removal from the bumper cover followed by disconnecting two screws and two side marker lamps then setting them aside while disconnecting their electrical connectors. The two exterior bumper cover pin-type retainers must be detached from the assembly. The two mud flaps and two fender splash shields should first be removed through the process of pin-type retainer unscrewing followed by removal. Through the fender opening remove the bumper cover bolts which number two on each side. The final step of removing the bumper cover includes disconnecting fog lamp electrical connectors when they are present. Use the opposite order of steps to put on the new bumper cover.

How to service and repair the front bumper cover on Mercury Villager?

The front bumper cover maintenance process starts with the removal of its pin-type retainers positioned at the top of the cover. The two screws and the two side marker lamps must be removed at this stage before handling the electrical connectors to place the lamps separate from the mounting surfaces. Move forward to take off both external pin-type retainer elements attached to the bumper cover. Detach the two mud flaps as well as the two fender splash shields by taking out the screws and pin-type retainers. To reach the bolts access the opening in the fender you need to remove each bumper cover bolt which has two at every side. Your next step should be disconnecting the fog lamp electrical connectors when they exist before completing bumper cover removal. Replacement or installation of the new bumper cover requires the same steps to be executed in reverse order.

OEM Mercury Villager Bumper

Bumper Fascia

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

10 Bumpers found

View related parts
Mercury Villager Bumper Cover, Front Part Number: F3XY17D957A
$353.75 MSRP: $485.35
You Save: $131.60 (28%)
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Front
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1993-1995 Mercury Villager | GS, LS, Nautica | 6 Cyl 3.0 L GAS
View related parts
Mercury Villager Bumper Cover Part Number: F6XZ-17D957-EA
$332.57 MSRP: $456.29
You Save: $123.72 (28%)
ADD TO CART
Product Specifications
- Other Name: Cover
- Manufacturer Note: Primed , paint to match
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1996-1998 Mercury Villager | GS, LS, Nautica | 6 Cyl 3.0 L GAS
View related parts
Mercury Villager Bumper Cover Part Number: XF5Z-17K835-AAA
Product Specifications
- Other Name: Kit
- Manufacturer Note: Primed
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1999-2002 Mercury Villager | Base, Estate, Sport | 6 Cyl 3.3 L GAS
View related parts
Mercury Villager Bumper Cover Part Number: XF5Z-17D957-BBB
Product Specifications
- Other Name: Cover
- Manufacturer Note: Primed , paint to match
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1999-2000 Mercury Villager | Base, Estate, Sport | 6 Cyl 3.3 L GAS
View related parts
Mercury Villager Impact Bar, Rear Part Number: XF5Z-17906-AA
Product Specifications
- Other Name: Bumper Assembly - Rear
- Manufacturer Note: Bar w/o cover
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1999-2002 Mercury Villager | Base, Estate, Sport | 6 Cyl 3.3 L GAS
View related parts
Mercury Villager Reinforcement, Front Part Number: XF5Z-17757-AA
Product Specifications
- Other Name: Bumper Assembly - Front
- Manufacturer Note: Base bar asy. only
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1999-2002 Mercury Villager | Base, Estate, Sport | 6 Cyl 3.3 L GAS
View related parts
Mercury Villager Reinforcement, Rear Part Number: F7XZ-17906-AA
Product Specifications
- Other Name: Bumper Assembly - Rear
- Manufacturer Note: Bar w/o cover
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1993-1998 Mercury Villager | GS, LS, Nautica | 6 Cyl 3.0 L GAS
View related parts
Mercury Villager Bumper Cover Part Number: F6XZ-17K835-AA
Product Specifications
- Other Name: Kit
- Manufacturer Note: Primed
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1996-1998 Mercury Villager | GS, LS, Nautica | 6 Cyl 3.0 L GAS
View related parts
Mercury Villager Reinforcement, Front Part Number: F3XY-17757-A
Product Specifications
- Other Name: Bumper Assembly - Front
- Manufacturer Note: Base bar asy only
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1993-1998 Mercury Villager | GS, LS, Nautica | 6 Cyl 3.0 L GAS
View related parts
Mercury Villager Bumper Cover, Front Part Number: 1F5Z-17D957-AAA
Product Specifications
- Other Name: Bumper Assembly - Front
- Manufacturer Note: Primed , paint to match
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2001-2002 Mercury Villager | Base, Estate, Sport | 6 Cyl 3.3 L GAS

Mercury Villager Bumper

OEM Bumper boasts unmatched quality. Each part goes through full quality checks. They adhere to Mercury's official factory standards. These steps remove flaws and inconsistencies. So you can get Bumper with long life and a perfect fit. Come to our website and find genuine Mercury Villager parts. We keep a wide inventory of OEM Villager parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

Mercury Villager Bumper Parts and Q&A

Bumper Cover, Front
1F5Z-17D957-AAA
Q: How to Address Bumper Issues on a Mercury Villager?
A:
The procedure for repairing or servicing the front bumper cover starts with upper pin-type retainers removal from the bumper cover followed by disconnecting two screws and two side marker lamps then setting them aside while disconnecting their electrical connectors. The two exterior bumper cover pin-type retainers must be detached from the assembly. The two mud flaps and two fender splash shields should first be removed through the process of pin-type retainer unscrewing followed by removal. Through the fender opening remove the bumper cover bolts which number two on each side. The final step of removing the bumper cover includes disconnecting fog lamp electrical connectors when they are present. Use the opposite order of steps to put on the new bumper cover.
Bumper Cover
XF5Z-17K835-AAA
Q: How to service and repair the front bumper cover on Mercury Villager?
A:
The front bumper cover maintenance process starts with the removal of its pin-type retainers positioned at the top of the cover. The two screws and the two side marker lamps must be removed at this stage before handling the electrical connectors to place the lamps separate from the mounting surfaces. Move forward to take off both external pin-type retainer elements attached to the bumper cover. Detach the two mud flaps as well as the two fender splash shields by taking out the screws and pin-type retainers. To reach the bolts access the opening in the fender you need to remove each bumper cover bolt which has two at every side. Your next step should be disconnecting the fog lamp electrical connectors when they exist before completing bumper cover removal. Replacement or installation of the new bumper cover requires the same steps to be executed in reverse order.