Other Name: Weatherstrip Assembly - Door Opening; Door Seal, Front Left Outer; Surround Weatherstrip; Weatherstrip Assembly - Door Window; Weatherstrip; Door Seal
Manufacturer Note: On Door
Position: Front Outer Driver Side
Replaces: 1L2Z-7820531-AA
Fits the following Mercury Models:
Mountaineer | 2002-2010 | Base, Convenience, Luxury, Premier | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
Q: How to Service and Repair the Rear Door Window Glass Weather Strip on Mercury Grand Marquis?
A: The service process for repairing the rear door window glass weather strip starts by studying the exploded view of rear door components showing the right-hand door design with the left-hand door being structurally similar. Detailed instructions for performing the task can be found in the procedures provided here.
Q: How to Service and Repair the Front Door Window Glass Weather Strip on Mercury Mountaineer?
A: The complete service and repair of the front door window glass weather strip starts with removing both the front door window glass and exterior moulding. The next step is to remove the front door glass top run channel assembly bolt while tightening it to 12 Nm (9 lb-ft) at installation time. Use the top opening of the front door to extract the front door glass top run channel assembly. The installation process will become complete by performing a reverse version of the removal tasks.
Q: How to Service and Repair the Front Door Window Glass Weather Strip on Mercury Mariner?
A: A proper service of the front door window glass weather strip requires first removing the front door window glass and the front door interior sail panel. The service and repair of front door window glass weather strip starts with removing all speaker electrical connectors from the vehicle. The installation procedure requires you to first remove and then supply a torque of 6 Nm (53 lb-in) to the two front door glass top run bolts. Follow the reverse order to install the front door glass top run after its removal.