How to service and repair the front seat cushion and frame on Mercury Grand Marquis?

Service and repair operations for the front seat cushion and frame begin with removing the seat and seat track in sequence. Begin by disconnecting and removing the lumbar motor then free all retainer components such as the J retainers and pin-type retainer. Begin by taking off the cover combined with retaining clip and pin after which you can remove the armrest and its cover trim. First remove the frame together with the bolts before pulling out the seat occupancy switch. Finish the procedure by taking out the seat trim cover. To assemble the seat follow the steps in reverse order of disassembly while testing that the restraint system functions correctly.

How to service and repair the front seat cushion on Mercury Cougar?

The front seat cushion service requires users to dismount the front seat followed by isolation of the safety belt warning indicator electrical connector before detaching the wiring harness from the seat base. Before proceeding you need to detach the retaining screws while releasing the retaining clip on the outer seat base side trim panel. The wiring harness needs disconnection from its seat base retention clips as well as electrical connector points. You must disconnect the drive cable connectors at the backrest motor on the seat base to detach the seat backrest drive cables. Disconnection of electrical connectors leads to termination of seat base wiring harness operations. Take the seat track assembly off and separate the cushion cover from the base of the backrest by untying all retaining strips from under the seat. The hog rings must be cut away from the seat underside to disconnect the cushion cover while lifting the cover and pad through the seat backrest from underneath. Creating the structure requires doing the opposite steps of what was needed for disassembly.

How to service the rear seat cushion on Mercury Mariner?

Service of the rear seat cushion begins by removing the full rear seat cushion. The J-strip must be freed up before unzipping both zippers situated near the cover's sides so the rear seat cushion cover can be removed. First remove the rear seat base cushion from the vehicle and then follow with removal of the rear seat base. The next step requires removing two bolts from the rear seat base bracket while tightening the bolts to 40 Nm (30 lb-ft) when reattaching them. Reassembly must start with the reverse procedures of the breakdown phase.

OEM Mercury Seat Cushion

Seat Pad Cushion

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

127 Seat Cushions found

View related parts
Mercury Seat Back Pad, Driver Side
Part Number: 6T2Z-7864811-AC
$60.94 MSRP: $84.30
You Save: $23.36 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad - Seat Back
- Position: Driver Side
- Replaces: 5T2Z-7864811-DA
Fits the following Mercury Models:
- Mariner | 2009-2010 | Base, Premier | 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Mercury Seat Back Pad, Passenger Side
Part Number: 6T2Z-7864810-AB
$40.95 MSRP: $56.64
You Save: $15.69 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad
- Position: Passenger Side
- Replaces: 5T2Z-7864810-CA
Fits the following Mercury Models:
- Mariner | 2005-2008 | Base, Convenience, Hybrid, Luxury, Premier | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
Mercury Seat Cushion, Rear Center Passenger Side
Part Number: 4L2Z-7863840-AA
$22.45 MSRP: $31.06
You Save: $8.61 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad - Rear Seat Cushion; Seat Cushion Foam, Center Right
- Position: Rear Center Passenger Side
Fits the following Mercury Models:
- Mountaineer | 2004-2005 | Base, Convenience, Luxury, Premier | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
Mercury Seat Back Pad, Driver Side
Part Number: 6T2Z-7864811-AB
$40.95 MSRP: $56.64
You Save: $15.69 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad - Seat Back
- Position: Driver Side
- Replaces: 5T2Z-7864811-CA
Fits the following Mercury Models:
- Mariner | 2005-2008 | Base, Convenience, Hybrid, Luxury, Premier | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
Mercury Seat Cushion Pad, Rear Passenger Side
Part Number: BT2Z-7863840-A
$54.47 MSRP: $75.35
You Save: $20.88 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad - Rear Seat Cushion; Seat Cushion
- Manufacturer Note: 40% Seat
- Position: Rear Passenger Side
- Replaces: 5T2Z-7863840-AA, AT2Z-7863840-A
Fits the following Mercury Models:
- Mariner | 2005-2011 | Base, Convenience, Hybrid, Luxury, Premier | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Mercury Seat Back Pad, Driver Side
Part Number: AE6Z-7864811-A
$59.45 MSRP: $82.25
You Save: $22.80 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad - Seat Back
- Position: Driver Side
Fits the following Mercury Models:
- Mariner | 2010-2011 | Base, Hybrid, Premier | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX
View related parts
Mercury Seat Cushion Pad, Rear Driver Side
Part Number: BT2Z-7863841-A
$65.34 MSRP: $90.38
You Save: $25.04 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad - Rear Seat Cushion; Seat Cushion
- Manufacturer Note: 60% Seat
- Position: Rear Driver Side
- Replaces: 5T2Z-7863841-BA, 7T2Z-7863841-A, AT2Z-7863841-A
Fits the following Mercury Models:
- Mariner | 2005-2011 | Base, Convenience, Hybrid, Luxury, Premier | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Mercury Seat Back Pad
Part Number: 6T2Z-7864810-AA
$61.25 MSRP: $84.73
You Save: $23.48 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad
- Manufacturer Note: RH/LH
Fits the following Mercury Models:
- Mariner | 2007 | Hybrid | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV)
View related parts
Mercury Seat Cushion, Rear
Part Number: 3L9Z-7863840-BA
$22.76 MSRP: $31.49
You Save: $8.73 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad - Rear Seat Cushion
- Position: Rear
Fits the following Mercury Models:
- Mountaineer | 2003-2005 | Base, Convenience, Luxury, Premier | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
Mercury Seat Back Pad, Passenger Side
Part Number: AE6Z-7864810-A
$51.06 MSRP: $70.63
You Save: $19.57 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad
- Position: Passenger Side
Fits the following Mercury Models:
- Mariner | 2010-2011 | Base, Hybrid, Premier | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX
View related parts
Mercury Seat Cushion, Rear Passenger Side
Part Number: 6L2Z-7863840-BA
$21.51 MSRP: $29.76
You Save: $8.25 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad - Rear Seat Cushion; Seat Cushion Foam, Rear Right; Seat Cushion Pad, Rear Right; Seat Cushion Pad
- Manufacturer Note: 60% Seat
- Position: Rear Passenger Side
Fits the following Mercury Models:
- Mountaineer | 2006-2010 | Base, Convenience, Luxury, Premier | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
Mercury Seat Back Pad, Driver Side
Part Number: 6T2Z-7864811-B
$51.90 MSRP: $71.80
You Save: $19.90 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad - Seat Back
- Manufacturer Note: Heat Element Included
- Position: Driver Side
Fits the following Mercury Models:
- Mariner | 2008 | Base, Hybrid, Premier | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
Mercury Seat Back Pad, Driver Side
Part Number: 9T2Z-7864811-B
$34.79 MSRP: $48.13
You Save: $13.34 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad - Seat Back
- Manufacturer Note: Heat Element Included
- Position: Driver Side
Fits the following Mercury Models:
- Mariner | 2009-2011 | Base, Hybrid, Premier | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Mercury Seat Back Pad, Driver Side
Part Number: BW7Z-5464811-A
$134.03 MSRP: $185.42
You Save: $51.39 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad - Seat Back
- Position: Driver Side
Fits the following Mercury Models:
- Grand Marquis | 2011 | LS | 8 Cyl 4.6 L FLEX
View related parts
Mercury Seat Back Pad, Passenger Side
Part Number: 6T2Z-7864810-B
$51.61 MSRP: $71.40
You Save: $19.79 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad
- Manufacturer Note: Heat Element Included
- Position: Passenger Side
Fits the following Mercury Models:
- Mariner | 2008 | Base, Hybrid, Premier | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
Mercury Seat Cushion Pad, Passenger Side
Part Number: 8E6Z-78632A22-C
Product Specifications
- Other Name: Pad - Seat Cushion; Seat Cushion
- Manufacturer Note: With Passenger Weight Sensor
- Position: Passenger Side
- Replaces: 8E6Z-78632A22-A
Fits the following Mercury Models:
- Mariner | 2008-2009 | Base, Premier | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS
View related parts
Mercury Seat Cushion, Rear
Part Number: 1L2Z-7863840-AA
Product Specifications
- Other Name: Pad - Rear Seat Cushion; Seat Cushion Foam, Rear
- Position: Rear
Fits the following Mercury Models:
- Mountaineer | 2002-2005 | Base, Convenience, Luxury, Premier | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
Mercury Seat Cushion Pad, Driver Side
Part Number: AT2Z-78632A23-A
Product Specifications
- Other Name: Pad - Seat Cushion; Seat Cushion
- Manufacturer Note: Heat Element Included
- Position: Driver Side
- Replaces: 9T2Z-78632A23-A
Fits the following Mercury Models:
- Mariner | 2009-2011 | Base, Hybrid, Premier | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Mercury Seat Cushion Pad, Driver Side
Part Number: 9E6Z-78632A23-A
Product Specifications
- Other Name: Pad - Seat Cushion; Seat Cushion
- Position: Driver Side
Fits the following Mercury Models:
- Mariner | 2009-2011 | Base, Hybrid, Premier | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS
View related parts
Mercury Seat Cushion, Rear Driver Side
Part Number: 6L2Z-7863841-DA
Product Specifications
- Other Name: Pad - Rear Seat Cushion; Seat Cushion Foam, Rear Left; Seat Cushion Pad
- Position: Rear Driver Side
Fits the following Mercury Models:
- Mountaineer | 2006-2010 | Base, Convenience, Luxury, Premier | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS

| Page 1 of 7 |Next >

1-20 of 127 Results

Mercury Seat Cushion Parts Questions & Experts Answers

Seat Cushion Pad, Front Driver Side
F6AZ-54632A23-CA
Q: How to service and repair the front seat cushion and frame on Mercury Grand Marquis?
A: Service and repair operations for the front seat cushion and frame begin with removing the seat and seat track in sequence. Begin by disconnecting and removing the lumbar motor then free all retainer components such as the J retainers and pin-type retainer. Begin by taking off the cover combined with retaining clip and pin after which you can remove the armrest and its cover trim. First remove the frame together with the bolts before pulling out the seat occupancy switch. Finish the procedure by taking out the seat trim cover. To assemble the seat follow the steps in reverse order of disassembly while testing that the restraint system functions correctly.
Seat Cushion Pad
1S8Z63632A22AA
Q: How to service and repair the front seat cushion on Mercury Cougar?
A: The front seat cushion service requires users to dismount the front seat followed by isolation of the safety belt warning indicator electrical connector before detaching the wiring harness from the seat base. Before proceeding you need to detach the retaining screws while releasing the retaining clip on the outer seat base side trim panel. The wiring harness needs disconnection from its seat base retention clips as well as electrical connector points. You must disconnect the drive cable connectors at the backrest motor on the seat base to detach the seat backrest drive cables. Disconnection of electrical connectors leads to termination of seat base wiring harness operations. Take the seat track assembly off and separate the cushion cover from the base of the backrest by untying all retaining strips from under the seat. The hog rings must be cut away from the seat underside to disconnect the cushion cover while lifting the cover and pad through the seat backrest from underneath. Creating the structure requires doing the opposite steps of what was needed for disassembly.
Seat Cushion Pad, Driver Side
5E6Z-78632A23-AA
Q: How to service the rear seat cushion on Mercury Mariner?
A: Service of the rear seat cushion begins by removing the full rear seat cushion. The J-strip must be freed up before unzipping both zippers situated near the cover's sides so the rear seat cushion cover can be removed. First remove the rear seat base cushion from the vehicle and then follow with removal of the rear seat base. The next step requires removing two bolts from the rear seat base bracket while tightening the bolts to 40 Nm (30 lb-ft) when reattaching them. Reassembly must start with the reverse procedures of the breakdown phase.