Other Name: Arm And Pivot Shaft Assembly; Windshield Wiper Linkage; Arm & Pivot Assembly; Wiper Linkage
Replaces: 8L8Z-17566-AA
Fits the following Mercury Models:
Mariner | 2007-2011 | Base, Convenience, Hybrid, Luxury, Premier | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
Other Name: Arm And Pivot Shaft; Windshield Wiper Linkage, Front Right, Right; Front Pivot & Arm Assembly; Arm & Pivot Assembly; Arm And Pivot Shaft Assembly; Wiper Linkage
Position: Front Passenger Side
Replaces: F77Z-17566-BA
Fits the following Mercury Models:
Mountaineer | 1997-2001 | Base | 6 Cyl 4.0 L GAS, 8 Cyl 5.0 L GAS
Q: How to service the Wiper Pivot and mounting arm on Mercury Milan?
A: To remove wiper mounting arm, pivot shaft To remove the wiper mounting arm and the pivot shaft, remove the top cowl panel grille and disconnect the electrical connector of the wiper motor. Next remove the assembly and the two bolts. To install, screw the bolts up to 5 Nm (44 lb-in) and undo the steps of removal.
Q: How to service the Wiper Pivot and mounting arm on Mercury Sable?
A: In order to service the wiper mounting arm and pivot shaft, remove the wiper pivot arms, cowl panel grille, disconnect the electrical connector, and remove three bolts. Install Re-Install the bolts to tighten them to 8 Nm (71 lb-in) and follow the steps of removal, fixing the position of the pivot arms on the wipers.