My Garage
Cart
Make sure this part fits

Ford F7UZ-15218A42-A
Lock Actuator, Front

1992-2003 Ford F7UZ15218A42A

Customer Questions & Expert Answers (15)
Ford F7UZ-15218A42-A Lock Actuator, Front
  • Part Description
    Actuator Assembly; Door Lock Actuator Motor, Front Left/Right
  • Base No.
    218A42
  • Position
    Front
  • Replaces
    F5UZ-15218A42-A
  • Manufacturer
    Ford
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2003 Ford E-150Base6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
    2003 Ford E-150 Club WagonChateau, XL, XLT6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
    1992-2002 Ford E-150 EconolineBase, XL6 Cyl 4.2 L GAS, 6 Cyl 4.9 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L GAS, 8 Cyl 5.8 L GAS
    1992-2002 Ford E-150 Econoline Club WagonChateau, Custom, XL, XLT6 Cyl 4.2 L GAS, 6 Cyl 4.9 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L GAS, 8 Cyl 5.8 L GAS
    2003 Ford E-250Base6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
    1992-2002 Ford E-250 EconolineBase, XL6 Cyl 4.2 L GAS, 6 Cyl 4.9 L BI-FUEL, 6 Cyl 4.9 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS, 8 Cyl 5.8 L GAS
    2003 Ford E-350 Club WagonChateau, XL, XLT10 Cyl 6.8 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS, 8 Cyl 7.3 L DIESEL
    1992-1998 Ford E-350 EconolineBase, XL10 Cyl 6.8 L GAS, 6 Cyl 4.9 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS, 8 Cyl 5.8 L GAS, 8 Cyl 7.3 L DIESEL, 8 Cyl 7.5 L GAS
    1992-2002 Ford E-350 Econoline Club WagonChateau, Chateau HD, Custom, Custom HD, XL, XL HD, XLT, XLT HD10 Cyl 6.8 L GAS, 6 Cyl 4.9 L BI-FUEL, 6 Cyl 4.9 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS, 8 Cyl 5.8 L GAS, 8 Cyl 7.3 L DIESEL, 8 Cyl 7.5 L GAS
    1999-2003 Ford E-350 Super DutyBase, XL10 Cyl 6.8 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS, 8 Cyl 7.3 L DIESEL
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Can you verify if F7UZ-15218A42-A is the right one for my car? Posted by FordPartsDeal Specialist
    A:
    Select Your Vehicle model to verify if part number F7UZ-15218A42-A fits your car.
    Posted by FordPartsDeal Specialist
    Q:
    What is the final step for installation for the 2003 Ford E-150? Posted by Customer
    A:
    Reverse the removal procedure to complete the process.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Door Lock Actuators
    Q:
    What should be disconnected after removing the door trim panel for the 2000 Ford E-150 Econoline? Posted by Customer
    A:
    Disconnect the door handle rod and the lock cylinder rod.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What is the procedure for the rear door for the 2001 Ford E-250 Econoline? Posted by Customer
    A:
    Remove the license plate housing screws, pull the housing away from the door, then disconnect the handle-to-latch cable at the door handle and the lock cylinder rod at the lock cylinder.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What should be removed next after the door trim panel for the 2003 Ford E-250? Posted by Customer
    A:
    Take out the door latch for hinged doors or the latch remote control for sliding doors.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Door Lock Actuators
    Q:
    How do you disconnect the lock cylinder rod for front and side hinged doors for the 2003 Ford E-150? Posted by Customer
    A:
    Disconnect the lock cylinder rod from the lock cylinder lever.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    How do you install the new components for the 2003 Ford E-250? Posted by Customer
    A:
    Reverse the removal procedure.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What is the procedure for the rear door for the 2000 Ford E-250 Econoline? Posted by Customer
    A:
    Remove the license plate housing screws, pull the housing away from the door, then disconnect the handle-to-latch cable at the door handle and the lock cylinder rod at the lock cylinder.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What components should be removed as an assembly for the front door for the 2002 Ford E-250 Econoline? Posted by Customer
    A:
    Remove the door latch, latch remote control cable, lock cylinder rod, push-button rod, and power door lock actuator.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What is the final step after removing the actuator for the 2001 Ford E-250 Econoline? Posted by Customer
    A:
    For installation, reverse the removal procedure to complete the process.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Door Lock Actuators
    Q:
    What needs to be disconnected for front and side hinged doors for the 2000 Ford E-150 Econoline? Posted by Customer
    A:
    Disconnect the lock cylinder rod from the lock cylinder lever and the outside door handle-to-latch rod at the door latch.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What is the first step to service and repair the rear door latch for the 2001 Ford E-150 Econoline? Posted by Customer
    A:
    Begin by removing the door trim panel and watershield.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What should be removed next after the door trim panel for the 2000 Ford E-150 Econoline? Posted by Customer
    A:
    Take out the door latch on hinged doors or the latch remote control on a sliding door.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Door Lock Actuators
    Q:
    How do you disconnect the lock cylinder rod for front and side hinged doors for the 2002 Ford E-150 Econoline? Posted by Customer
    A:
    Disconnect the lock cylinder rod from the lock cylinder lever and the outside door handle-to-latch rod at the door latch.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What is the first step to service and repair the sliding door latch for the 2001 Ford E-250 Econoline? Posted by Customer
    A:
    Begin by removing the door trim panel and watershield.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Door Latch Assembly
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM Ford Lock Actuator, Front F7UZ-15218A42-A Designed for Proper Fit and Performance

The Ford part F7UZ-15218A42-A Lock Actuator, Front as a genuine Ford Door Lock Actuators, Door Lock Actuator Motor, Door Latch Assembly component delivers both authenticity and reliability. This item carries a warranty from the manufacturer which guarantees 12-month, 12,000-mile of use. The Ford F7UZ-15218A42-A Lock Actuator, Front is used with Ford E-150 Econoline, E-150, E-150 Club Wagon models. The original Ford part will bear the manufacturer part number: F7UZ-15218A42-A and where it is made at Ford. It has been specifically developed to fit the Front and has the code: 218A42.
This component has dimensions of 12.6 x 2.5 x 4.6 inches and its weight is approximately 0.70 Pounds. The part F7UZ15218A42A is available in New condition while meeting the standards of the product rating. The Actuator Assembly; Door Lock Actuator Motor, Front Left/Right belongs to the Direct Replacement category to guarantee it is suitable for its specific vehicle applications. This part F7UZ-15218A42-A can be known as Actuator, and it replaces F5UZ-15218A42-A. The inventory reference for this item is SKU: F7UZ-15218A42-A. The Ford manufacturer issues a factory warranty for this component which ensures dependable operation and peak performance. You can find delivery and returns information on our Shipping Policy and Return Policy pages.
Original equipment manufacturer parts are of the top standards and their performance is outstanding and top notch. This is explained by the fact that they follow the official manufacturing techniques of Ford, use of premium material and meets high standards of quality. Our site is worth visiting, in case you need high-quality and affordable OEM Ford components. We promise the optimal priced Ford parts on a wide range. You can relax that all OEM products you buy from us include a manufacturer warranty and will be covered by our simple and easy-to-use return policy, so you will not worry about buying a part.