My Garage
Cart
Make sure this part fits

Ford 5C3Z-4R602-A
Drive Shaft

2002-2007 Ford 5C3Z4R602A

Customer Questions & Expert Answers (11)
Ford 5C3Z-4R602-A Drive Shaft
  • Part Description
    Shaft Assembly - Drive; Driveshaft
  • Base No.
    4R602
  • Replaces
    2C3Z-4R602-FZ
  • Manufacturer
    Ford
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Ford
    Base No.4R602
    Manufacturer Part Number5C3Z-4R602-A
    Part DescriptionShaft Assembly - Drive; Driveshaft
    Item Dimensions25.9 x 6.0 x 15.2 inches
    Item Weight73.20 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces2C3Z-4R602-FZ
    ManufacturerFord
    SKU5C3Z-4R602-A
    WarrantyThis genuine Ford part is guaranteed by Ford's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2002-2007 Ford F-250 Super DutyHarley-Davidson Edition, King Ranch, Lariat, XL, XLT10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS
    2002-2007 Ford F-350 Super DutyHarley-Davidson Edition, King Ranch, Lariat, XL, XLT10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS
  • Customer Questions & Expert Answers

    Q:
    Do you think this 5C3Z-4R602-A will fit my car? Posted by FordPartsDeal Specialist
    A:
    Select Your Vehicle model to verify if part number 5C3Z-4R602-A fits your car.
    Posted by FordPartsDeal Specialist
    Q:
    What should you do to prevent the bearing cups from falling off for the 2005 Ford F-250 Super Duty? Posted by Customer
    A:
    Tape the bearing cups to the spider.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Drive Shaft
    Q:
    How do you disconnect the driveshaft from the axle flange for the 2005 Ford F-350 Super Duty? Posted by Customer
    A:
    Remove and discard the bolts and U-Joint retainers.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Drive Shaft
    Q:
    What is the procedure for a split pin yoke for the 2007 Ford F-350 Super Duty? Posted by Customer
    A:
    Index-mark the driveshaft to the rear axle pinion flange.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Drive Shaft
    Q:
    What is the first step to remove the rear two-piece driveshaft for the 2007 Ford F-250 Super Duty? Posted by Customer
    A:
    Ensure the vehicle is in NEUTRAL and positioned on a hoist.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Drive Shaft
    Q:
    What is the final step in the assembly process for the 2002 Ford F-350 Super Duty? Posted by Customer
    A:
    Reverse the disassembly steps and lubricate the stub shaft spline with Premium Long-Life Grease XG-1-C or an equivalent that meets Ford specification ESA-M1C75-B.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Drive Shaft
    Q:
    What is the next step after disconnecting the driveshaft from the axle flange for the 2005 Ford F-250 Super Duty? Posted by Customer
    A:
    Index-mark the driveshaft at the transmission flange, remove and discard the bolts, and disconnect the driveshaft from the transmission, again using mechanic's wire for support.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Drive Shaft
    Q:
    What is the next step after wrapping the bearing cups for the 2003 Ford F-250 Super Duty? Posted by Customer
    A:
    Compress and separate the front driveshaft from the front axle, then detach it from the transfer case.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Drive Shaft
    Q:
    What is the next step after indexing the slip yoke for the 2003 Ford F-350 Super Duty? Posted by Customer
    A:
    Remove the center bearing support bolts and the driveshaft assembly.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Drive Shaft
    Q:
    What should be done after positioning the driveshaft for the 2004 Ford F-250 Super Duty? Posted by Customer
    A:
    Loosely install four new bolts for vehicles with circular flanges and install two new retainers and four new bolts for those with split pin yokes.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Drive Shaft
    Q:
    What is the next step after wrapping the bearing cups for the 2004 Ford F-350 Super Duty? Posted by Customer
    A:
    Compress and separate the front driveshaft from the front axle, then detach it from the transfer case.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Drive Shaft
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM Ford 5C3Z-4R602-A, Excellent Performance and Perfect Fitment

To ensure reliability, purchase Ford part # 5C3Z-4R602-A Drive Shaft. It is sometimes referred to as Ford Drive Shaft. For those Ford owners who aspire to maintain their vehicles in optimal shape, opting for OEM parts is a wise choice. Precisely engineered, these components adhere to stringent factory guidelines and are produced in state-of-the-art facilities using cutting-edge technologies. Moreover, they are subjected to thorough testing to certify their resilience and safety, thereby making them a dependable option for Ford owners.

FordPartsDeal.com is a leading supplier of genuine Ford parts such as Ford 5C3Z4R602A Drive Shaft. A vast selection of genuine Ford parts is available on our website, all offered at discounted prices. Every OEM Ford part is covered by the manufacturer's warranty, which also applies to our hassle-free return policy. Enjoy fast delivery service, ensuring you get your parts when you need them. Your shopping experience here is guaranteed to be pleasurable. For detailed Ford parts information, click here.
Choose FordPartsDeal for discounted prices, exceptional service and fast delivery