My Garage
Cart
Make sure this part fits

Ford F81Z-4602-DGG
Drive Shaft

1999-2007 Ford F81Z4602DGG

Customer Questions & Expert Answers (11)
Ford F81Z-4602-DGG Drive Shaft
  • Part Description
    Shaft Assembly - Drive; Driveshaft
  • Base No.
    4602
  • Manufacturer
    Ford
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Ford
    Base No.4602
    Manufacturer Part NumberF81Z-4602-DGG
    Part DescriptionShaft Assembly - Drive; Driveshaft
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerFord
    SKUF81Z-4602-DGG
    WarrantyThis genuine Ford part is guaranteed by Ford's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    1999 Ford F-250Base8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
    1999-2007 Ford F-250 Super DutyKing Ranch, Lariat, XL, XLT8 Cyl 5.4 L GAS
    1999-2002 Ford F-350 Super DutyLariat, XL, XLT8 Cyl 5.4 L GAS
  • Customer Questions & Expert Answers

    Q:
    Can you verify if F81Z-4602-DGG is the right one for my car? Posted by FordPartsDeal Specialist
    A:
    Select Your Vehicle model to verify if part number F81Z-4602-DGG fits your car.
    Posted by FordPartsDeal Specialist
    Q:
    How do you secure the driveshaft for circular flange for the 2005 Ford F-250 Super Duty? Posted by Customer
    A:
    Position the driveshaft yoke on the rear axle pinion flange, loosely install the four new bolts, then tighten them evenly in a cross pattern to ensure proper seating.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Drive Shaft
    Q:
    What should be inspected on the driveshaft slip yoke boot for the 2005 Ford F-250 Super Duty? Posted by Customer
    A:
    Inspect the driveshaft slip yoke boot for rips or holes, replacing it if necessary.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Drive Shaft
    Q:
    What is the final step in the assembly process for the 2002 Ford F-350 Super Duty? Posted by Customer
    A:
    Reverse the disassembly steps and lubricate the stub shaft spline with Premium Long-Life Grease XG-1-C or an equivalent that meets Ford specification ESA-M1C75-B.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Drive Shaft
    Q:
    How do you disconnect the rear driveshaft from the rear axle for the 2000 Ford F-250 Super Duty? Posted by Customer
    A:
    Mark and remove the driveshaft to rear axle bolts, followed by removing the U-joint retainers.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Drive Shaft
    Q:
    What additional step is required for four-wheel drive or those with a manual transmission for the 2001 Ford F-350 Super Duty? Posted by Customer
    A:
    Index-mark the driveshaft to the transfer case or transmission flange and disconnect it, removing and discarding the bolts while supporting the driveshaft.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Drive Shaft
    Q:
    What should be examined on the center bearing rubber insulator for the 2007 Ford F-250 Super Duty? Posted by Customer
    A:
    Check for hardening, cracking, or deterioration and replace it if necessary.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Drive Shaft
    Q:
    What should be done to the front driveshaft before removal for the 2003 Ford F-250 Super Duty? Posted by Customer
    A:
    Index-mark the front driveshaft at both the front axle flange and the transfer case flange.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Drive Shaft
    Q:
    What is the first step to service and repair the rear two-piece drive/propeller shaft for the 2000 Ford F-350 Super Duty? Posted by Customer
    A:
    Raise and support the vehicle, then index mark the driveshaft at the axle flange.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Drive Shaft
    Q:
    What should be done during installation for manual transmission for the 2001 Ford F-250 Super Duty? Posted by Customer
    A:
    Align the index marks and position the driveshaft yoke on the transmission flange.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Drive Shaft
    Q:
    What should you do for a circular flange for the 2004 Ford F-250 Super Duty? Posted by Customer
    A:
    Remove the four bolts at the transmission and the four bolts at the rear axle pinion flange, noting that bolt direction varies by application.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Drive Shaft
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM Ford F81Z-4602-DGG, Excellent Performance and Perfect Fitment

To ensure reliability, purchase Ford part # F81Z-4602-DGG Drive Shaft. It is sometimes referred to as Ford Drive Shaft. For those Ford owners who aspire to maintain their vehicles in optimal shape, opting for OEM parts is a wise choice. Precisely engineered, these components adhere to stringent factory guidelines and are produced in state-of-the-art facilities using cutting-edge technologies. Moreover, they are subjected to thorough testing to certify their resilience and safety, thereby making them a dependable option for Ford owners.

FordPartsDeal.com is a leading supplier of genuine Ford parts such as Ford F81Z4602DGG Drive Shaft. A vast selection of genuine Ford parts is available on our website, all offered at discounted prices. Every OEM Ford part is covered by the manufacturer's warranty, which also applies to our hassle-free return policy. Enjoy fast delivery service, ensuring you get your parts when you need them. Your shopping experience here is guaranteed to be pleasurable. For detailed Ford parts information, click here.
Choose FordPartsDeal for discounted prices, exceptional service and fast delivery