Ford 6W1Z-5493-C
Stabilizer Bar Bushing, Rear

Vehicle elevating and supporting processes start the repair of the sway bar bushing. The sway bar bushings from both left and right sides get removed identically although the right side serves as the example. Secure the repair work by elevating the vehicle and start by unscrewing the bracket nuts to remove the sway bar bracket. As the next step, you should take out the sway bar bushing. Regular installation should follow the opposite steps used for removal.

The service of sway bar bushing starts with vehicle elevation and support. The mount removal process for left and right sway bar bushings is identical with the right-side bushing set as the example. Begin by uninstalling the bracket sway bar through the removal of its nuts followed by the bracket itself. Begin the next step by taking off the sway bar bushing. The installation process involves following the opposite steps of removal while using original or equivalent replacement parts for all suspension fasteners because poor quality or non-spec parts can cause both performance problems and heavy maintenance expenses. The correct torque must be followed during reassembly because it ensures the proper fixation of these components.

You should lift and stabilize the vehicle during sway bar bushing service operations. The procedure used to remove both left and right sway bar bushings matches exactly, yet this instruction will show the right side bushing removal. Begin the procedure by removing the sway bar bracket after unfastening the nuts, which enables the bracket to be completely removed. Remove the sway bar bushing after the bracket is uninstalled. Follow the reverse order of removal steps to install the sway bar bushing. The replacement of suspension fasteners must be done with original parts or with equivalent components because inferior materials create major service difficulties. Player should follow all specified torque values while reassembling to ensure these critical components stay tightly in position.

For installation, reverse the removal procedure.