My Garage
Cart
Make sure this part fits

Ford 6C3Z-19712-AB
Condenser

1999-2007 Ford 6C3Z19712AB

Customer Questions & Expert Answers (7)
Ford 6C3Z-19712-AB Condenser
Ford 6C3Z-19712-AB Condenser
  • Part Description
    Kit - Air Conditioning Condenser; A/C Condenser
  • Base No.
    19712
  • Replaces
    F81Z-19712-AA, 6C3Z-19712-AA, YJ-472
  • Manufacturer
    Ford
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2000-2005 Ford ExcursionEddie Bauer, Limited, XLS, XLT10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 7.3 L DIESEL
    1999 Ford F-250Base, Lariat, XL, XLT8 Cyl 4.6 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
    1999-2007 Ford F-250 Super DutyHarley-Davidson Edition, King Ranch, Lariat, XL, XLT10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 7.3 L DIESEL
    1999-2007 Ford F-350 Super DutyHarley-Davidson Edition, King Ranch, Lariat, XL, XLT10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 7.3 L DIESEL
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is 6C3Z-19712-AB the part I need for my vehicle? Posted by FordPartsDeal Specialist
    A:
    Select Your Vehicle model to verify if part number 6C3Z-19712-AB fits your car.
    Posted by FordPartsDeal Specialist
    Q:
    How to service the A/C condenser core for 5.4L, 6.8L, and 7.3L engines on Ford Excursion? Posted by Customer
    A:
    Service on the A/C condenser core for the 5.4L, 6.8L and 7.3L engines requires disconnection of the ground cable from the battery followed by performing the Refrigerant Discharging and Recovery Procedure. Take off the sight shield by removing its 8 pushpins to disconnect both the A/C condenser core inlet and outlet lines. First detach both grille supports with their right-hand and left-hand screws and afterward replace the hood latch while marking its position for alignment in the final assembly phase. The necessary next step is to remove the right-hand and left-hand A/C condenser core mounting brackets through their screws before lifting out the A/C condenser core. Reinstall the A/C condenser by working in reverse order but service the new component with proper amounts of PAG Refrigerant Compressor Oil (R-132a Systems) F7AZ-19589-DA (Motorcraft YN-12-C) or equivalent oil that follows Ford specification WSH-M1C231-B. Also apply PAG Refrigerant Compressor Oil (R-134a Systems) F7AZ-19589-DA (Motorcraft YN-12-C) or equivalent oil which satisfies the same Ford specification on O-ring seals.
    Posted by FordPartsDeal Specialist
    Q:
    What components need to be removed after recovering the refrigerant for the 2003 Ford Excursion? Posted by Customer
    A:
    Remove the 9 pin-type retainers, the sight shield, and the air deflector.
    Posted by FordPartsDeal Specialist
    See expert answers on similar A/C Condenser
    Q:
    What should be done if a leak is suspected for the 2005 Ford Excursion? Posted by Customer
    A:
    Conduct a leak test before removal.
    Posted by FordPartsDeal Specialist
    See expert answers on similar A/C Condenser
    Q:
    What is the first step to service and repair the A/C condenser for the 2001 Ford Excursion? Posted by Customer
    A:
    Disconnect the battery ground cable.
    Posted by FordPartsDeal Specialist
    See expert answers on similar A/C Condenser
    Q:
    What should be done with the O-ring seals when disconnecting the A/C condenser core inlet and outlet lines for the 2004 Ford F-350 Super Duty? Posted by Customer
    A:
    Discard the O-ring seals.
    Posted by FordPartsDeal Specialist
    See expert answers on similar A/C Condenser
    Q:
    What are the final steps after installing the A/C condenser core for the 2006 Ford F-250 Super Duty? Posted by Customer
    A:
    Evacuate, leak test, and charge the refrigerant system.
    Posted by FordPartsDeal Specialist
    See expert answers on similar A/C Condenser
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM Ford Condenser 6C3Z-19712-AB Designed for Proper Fit and Performance

The Ford part 6C3Z-19712-AB Condenser as a genuine Ford A/C Condenser component delivers both authenticity and reliability. This item carries a warranty from the manufacturer which guarantees 12-month, 12,000-mile of use. The Ford 6C3Z-19712-AB Condenser is used with Ford Excursion, F-250, F-350 Super Duty models. The original Ford part will bear the manufacturer part number: 6C3Z-19712-AB and where it is made at Ford. It has the code: 19712.
This component has dimensions of 27.5 x 6.2 x 38.5 inches and its weight is approximately 13.30 Pounds. The part 6C3Z19712AB is available in New condition while meeting the standards of the product rating. The Kit - Air Conditioning Condenser; A/C Condenser belongs to the Direct Replacement category to guarantee it is suitable for its specific vehicle applications. This part 6C3Z-19712-AB replaces F81Z-19712-AA, 6C3Z-19712-AA, YJ-472. The inventory reference for this item is SKU: 6C3Z-19712-AB. The Ford manufacturer issues a factory warranty for this component which ensures dependable operation and peak performance. You can find delivery and returns information on our Shipping Policy and Return Policy pages.
Original equipment manufacturer parts are of the top standards and their performance is outstanding and top notch. This is explained by the fact that they follow the official manufacturing techniques of Ford, use of premium material and meets high standards of quality. Our site is worth visiting, in case you need high-quality and affordable OEM Ford components. We promise the optimal priced Ford parts on a wide range. You can relax that all OEM products you buy from us include a manufacturer warranty and will be covered by our simple and easy-to-use return policy, so you will not worry about buying a part.