Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

Ford H2MZ-18476-L
Heater Core, Front

1999-2004 Ford H2MZ18476L

Customer Questions & Expert Answers (7)
Ford H2MZ-18476-L Heater Core, Front
Ford H2MZ-18476-L Heater Core, Front
Ford H2MZ-18476-L Heater Core, Front
  • Part Description
    Heater Assembly - Less Radiator; HVAC Heater Core, Front; HVAC Heater Core
  • Position
    Front
  • Replaces
    F81Z-18476-AA, HC-21
  • Manufacturer
    Ford
Make sure this part fits
$74.65 MSRP: $118.55
You Save: $43.90 (38%)
Currently Unavailable

Due to manufacturer supply shortage, this item isn't currently available for ordering.

  • H2MZ-18476-L Heater Core, Front is Ref No. 14 in the diagram below

    2004 Ford Excursion Heater Core, Front Diagram for H2MZ-18476-L
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for H2MZ-18476-L

  • Vehicle Fitment

    Year Make Model Trim Engine
    2000-2004 Ford ExcursionEddie Bauer, Limited, XLS, XLT10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 7.3 L DIESEL
    1999 Ford F-250Base, Lariat, XL, XLT8 Cyl 4.6 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
    1999-2004 Ford F-250 Super DutyHarley-Davidson Edition, King Ranch, Lariat, XL, XLT10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 7.3 L DIESEL
    1999-2004 Ford F-350 Super DutyHarley-Davidson Edition, King Ranch, Lariat, XL, XLT10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 7.3 L DIESEL
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Is this H2MZ-18476-L compatible with my car? Posted by FordPartsDeal Specialist
    A:
    Select Your Vehicle model to verify if part number H2MZ-18476-L fits your car.
    Posted by FordPartsDeal Specialist
    Q:
    How to service and repair the heater core for the auxiliary climate control on Ford Excursion? Posted by Customer
    A:
    The service procedure for the auxiliary climate control heater core begins by removing the third row seat while positioning aside the right-hand rear quarter trim panel. Introduce the heater core service by first unscrewing its eight cover fasteners then adsorb its housing from the compartment. The first step to disconnect the heater core requires clamping off the hoses then placing constant tension clamps before detaching the hoses from the heater core. Removal installation needs a reversal of initial steps with application of MERPOL(R) Ford specification ESE-M99B144-B or plain water as necessary coolant hose lubrication. The proper assembly along with correct sealing of the air conditioning and heater assembly remains necessary to achieve efficient operation by the auxiliary climate control system. Complete engine cooling system filling will finish the process.
    Posted by FordPartsDeal Specialist
    Q:
    How to Remove and Install a Heater Core for Auxiliary Climate Control on Ford F-350 Super Duty? Posted by Customer
    A:
    One should start by removing the third row seat and setting the right-hand rear quarter trim panel to the side. Start the process by removing the eight screws that secure the heater core cover and afterwards separate the heater core from its housing. Disconnect the heater core from heater inlet and outlet hoses until the constant tension clamps can secure and release the hoses from the heater core. The correct assembly together with sealing of the air conditioning and heater assembly will ensure efficient operation of the auxiliary climate control system during installation. Follow these installation steps while lubricating coolant hoses by using plain water if needed and complete the engine cooling system refill.
    Posted by FordPartsDeal Specialist
    Q:
    What is the next step after removing the actuator assembly for the 2000 Ford Excursion? Posted by Customer
    A:
    Remove the screws securing the heater core cover and raise the cover vertically to avoid damaging the heater core housing.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Heater Core
    Q:
    How do you remove the panel/floor door vacuum control motor for the 2001 Ford Excursion? Posted by Customer
    A:
    Disconnect the vacuum line, remove the screws, and rotate the motor to disengage the lever.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Heater Core
    Q:
    What should you be cautious about when handling the panel/floor door lever for the 2003 Ford Excursion? Posted by Customer
    A:
    Avoid bending the brittle panel/floor door lever.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Heater Core
    Q:
    What is the next step after removing the vacuum control motor for the 2004 Ford F-350 Super Duty? Posted by Customer
    A:
    Remove the electronic blend door actuator and bracket assembly by disconnecting the electrical connector, removing the screws, and rotating the assembly.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Heater Core
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM Ford Heater Core, Front H2MZ-18476-L Designed for Proper Fit and Performance

The Ford part H2MZ-18476-L Heater Core, Front as a genuine Ford Heater Core component delivers both authenticity and reliability. This item carries a warranty from the manufacturer which guarantees 12-month, 12,000-mile of use. The Ford H2MZ-18476-L Heater Core, Front is used with Ford Excursion, F-250, F-350 Super Duty models. The original Ford part will bear the manufacturer part number: H2MZ-18476-L and where it is made at Ford. It has been specifically developed to fit the Front.
This component has dimensions of 6.7 x 10.6 x 17.4 inches and its weight is approximately 2.80 Pounds. The part H2MZ18476L is available in New condition while meeting the standards of the product rating. The Heater Assembly - Less Radiator; HVAC Heater Core, Front; HVAC Heater Core belongs to the Direct Replacement category to guarantee it is suitable for its specific vehicle applications. This part H2MZ-18476-L replaces F81Z-18476-AA, HC-21. The inventory reference for this item is SKU: H2MZ-18476-L. The Ford manufacturer issues a factory warranty for this component which ensures dependable operation and peak performance. You can find delivery and returns information on our Shipping Policy and Return Policy pages.
Original equipment manufacturer parts are of the top standards and their performance is outstanding and top notch. This is explained by the fact that they follow the official manufacturing techniques of Ford, use of premium material and meets high standards of quality. Our site is worth visiting, in case you need high-quality and affordable OEM Ford components. We promise the optimal priced Ford parts on a wide range. You can relax that all OEM products you buy from us include a manufacturer warranty and will be covered by our simple and easy-to-use return policy, so you will not worry about buying a part.