My Garage
Cart
Make sure this part fits

Ford F8AZ-19980-AA
Temperature Control

1998-2011 Ford F8AZ19980AA

Customer Questions & Expert Answers (26)
Ford F8AZ-19980-AA Temperature Control
  • Part Description
    Panel Assembly - Control; HVAC Temperature Control Panel; Climate Control Module; Blower Control Switch
  • Base No.
    19980
  • Manufacturer
    Ford
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Ford
    Base No.19980
    Manufacturer Part NumberF8AZ-19980-AA
    Part DescriptionPanel Assembly - Control; HVAC Temperature Control Panel; Climate Control Module; Blower Control Switch
    Other NamesHeater Control; Dash Control Unit
    Item Dimensions4.6 x 3.0 x 10.6 inches
    Item Weight0.50 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerFord
    SKUF8AZ-19980-AA
    WarrantyThis genuine Ford part is guaranteed by Ford's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    1998-2011 Ford Crown VictoriaBase, LWB, LX, LX Sport, Police Interceptor, S, Special Edition8 Cyl 4.6 L CNG, 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS
    1998-2011 Mercury Grand MarquisGS, GSL, Limited Edition, LS, LSE, Ultimate Edition8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS
    2003-2004 Mercury MarauderBase8 Cyl 4.6 L GAS
  • Customer Questions & Expert Answers

    Q:
    Can you verify if F8AZ-19980-AA is the right one for my car? Posted by FordPartsDeal Specialist
    A:
    Select Your Vehicle model to verify if part number F8AZ-19980-AA fits your car.
    Posted by FordPartsDeal Specialist
    Q:
    What should be done after depowering the SRS for the 2007 Ford Crown Victoria? Posted by Customer
    A:
    Detach the finish panel and disconnect the electrical connector.
    Posted by FordPartsDeal Specialist
    See expert answers on similar A/C Switch
    Q:
    What is the next step after draining the cooling system and disconnecting the heater hose for the 2000 Ford Crown Victoria? Posted by Customer
    A:
    Remove the screws to take out the blower motor speed control.
    Posted by FordPartsDeal Specialist
    See expert answers on similar HVAC Control Module
    Q:
    What should you do to install the components for the 2000 Ford Crown Victoria? Posted by Customer
    A:
    Reverse the removal procedure.
    Posted by FordPartsDeal Specialist
    See expert answers on similar A/C Switch
    Q:
    What is the first step to service and repair the manual A/C climate control assembly for the 2005 Ford Crown Victoria? Posted by Customer
    A:
    Depower the supplemental restraint system (SRS) by following the appropriate procedures for arming and disarming the air bag systems.
    Posted by FordPartsDeal Specialist
    See expert answers on similar A/C Switch
    Q:
    What is the procedure for installation for the 2008 Ford Crown Victoria? Posted by Customer
    A:
    Reverse the removal procedure.
    Posted by FordPartsDeal Specialist
    See expert answers on similar HVAC Control Module
    Q:
    What is the first step to service the blower motor switch for the 2007 Ford Crown Victoria? Posted by Customer
    A:
    Remove the climate control assembly.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Blower Control Switches
    Q:
    What should you do for installation for the 2002 Ford Crown Victoria? Posted by Customer
    A:
    Reverse the removal procedure.
    Posted by FordPartsDeal Specialist
    See expert answers on similar A/C Switch
    Q:
    What is the procedure to install the new assembly for the 2008 Ford Crown Victoria? Posted by Customer
    A:
    Reverse the removal procedure.
    Posted by FordPartsDeal Specialist
    See expert answers on similar A/C Switch
    Q:
    What is the next step after removing the screws for the 2006 Ford Crown Victoria? Posted by Customer
    A:
    Remove the climate control assembly itself.
    Posted by FordPartsDeal Specialist
    See expert answers on similar A/C Switch
    Q:
    What is the next step after removing the blower motor switch knob for the 2009 Mercury Grand Marquis? Posted by Customer
    A:
    Release the three tabs to remove the blower motor switch.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Blower Control Switches
    Q:
    What should be done after removing the climate control assembly for the 2004 Mercury Marauder? Posted by Customer
    A:
    Pull and remove the blower motor switch knob.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Blower Control Switches
    Q:
    What is the next step after disconnecting the wire harness connector for the 2001 Mercury Grand Marquis? Posted by Customer
    A:
    Remove the screws to take out the blower motor speed control.
    Posted by FordPartsDeal Specialist
    See expert answers on similar HVAC Control Module
    Q:
    What should you do for installation for the 2000 Mercury Grand Marquis? Posted by Customer
    A:
    Reverse the removal procedure.
    Posted by FordPartsDeal Specialist
    See expert answers on similar A/C Switch
    Q:
    What is the next step after removing the blower motor switch knob for the 2005 Mercury Grand Marquis? Posted by Customer
    A:
    Release the tabs and remove the blower motor switch.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Blower Control Switches
    Q:
    What is the first step to service and repair the climate control assembly for manual A/C for the 2004 Mercury Marauder? Posted by Customer
    A:
    Begin by removing the finish panel and disconnecting the connector.
    Posted by FordPartsDeal Specialist
    See expert answers on similar A/C Switch
    Q:
    What is the next step after removing the EATC module for the 2001 Mercury Grand Marquis? Posted by Customer
    A:
    Take out the nuts and the vacuum harness, then disconnect the wire harness connectors to fully remove the EATC module.
    Posted by FordPartsDeal Specialist
    See expert answers on similar A/C Switch
    Q:
    How do you remove the blower motor switch for the 2002 Mercury Grand Marquis? Posted by Customer
    A:
    Depress the snap tabs and take out the blower motor switch, again noting that the knob will drop off.
    Posted by FordPartsDeal Specialist
    See expert answers on similar A/C Switch
    Q:
    What should be done after removing the finish panel for the 2003 Mercury Marauder? Posted by Customer
    A:
    Remove the screws securing the EATC module to the instrument panel and carefully pull the module out.
    Posted by FordPartsDeal Specialist
    See expert answers on similar A/C Switch
    Q:
    What should you do after removing the screws from the climate control head for the 2003 Mercury Marauder? Posted by Customer
    A:
    Disconnect the climate control assembly by detaching the electrical connectors and the vacuum line connector.
    Posted by FordPartsDeal Specialist
    See expert answers on similar A/C Switch
    Q:
    What should be done after depowering the SRS for the 2009 Mercury Grand Marquis? Posted by Customer
    A:
    Detach the finish panel and disconnect the electrical connector.
    Posted by FordPartsDeal Specialist
    See expert answers on similar A/C Switch
    Q:
    What is the next step after removing the HVAC module for the 2009 Mercury Grand Marquis? Posted by Customer
    A:
    Remove the nuts and disconnect the vacuum harness.
    Posted by FordPartsDeal Specialist
    See expert answers on similar HVAC Control Module
    Q:
    What is the first step in servicing the EATC Climate Control Assembly for the 2005 Mercury Grand Marquis? Posted by Customer
    A:
    Depower the supplemental restraint system (SRS).
    Posted by FordPartsDeal Specialist
    See expert answers on similar A/C Switch
    Q:
    What is the first step to service the blower motor switch for the 2003 Mercury Marauder? Posted by Customer
    A:
    Remove the climate control assembly.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Blower Control Switches
    Q:
    What should be done for installation for the 2004 Mercury Marauder? Posted by Customer
    A:
    Reverse the removal procedure.
    Posted by FordPartsDeal Specialist
    See expert answers on similar A/C Switch
    Q:
    What is the first step to service the blower motor speed control for the 2004 Mercury Marauder? Posted by Customer
    A:
    Remove the nuts and set aside the vapor management valve (VMV).
    Posted by FordPartsDeal Specialist
    See expert answers on similar HVAC Control Module
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM Ford F8AZ-19980-AA, Excellent Performance and Perfect Fitment

To ensure reliability, purchase Ford part # F8AZ-19980-AA Temperature Control. It is sometimes referred to as Ford A/C Switch, Ford Blower Control Switches, Ford HVAC Control Module. For those Ford owners who aspire to maintain their vehicles in optimal shape, opting for OEM parts is a wise choice. Precisely engineered, these components adhere to stringent factory guidelines and are produced in state-of-the-art facilities using cutting-edge technologies. Moreover, they are subjected to thorough testing to certify their resilience and safety, thereby making them a dependable option for Ford owners.

FordPartsDeal.com is a leading supplier of genuine Ford parts such as Ford F8AZ19980AA Temperature Control. A vast selection of genuine Ford parts is available on our website, all offered at discounted prices. Every OEM Ford part is covered by the manufacturer's warranty, which also applies to our hassle-free return policy. Enjoy fast delivery service, ensuring you get your parts when you need them. Your shopping experience here is guaranteed to be pleasurable. For detailed Ford parts information, click here.
Choose FordPartsDeal for discounted prices, exceptional service and fast delivery