Expedition | 2007-2014 | Eddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL XL, EL XLT, Funkmaster Flex Edition, King Ranch, Limited, XL, XLT | 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
Expedition | 2018-2021 | King Ranch, Limited, Max King Ranch, Max Limited, Max Platinum, Max SSV, Max XL, Max XLT, Platinum, SSV, XL, XLT | 6 Cyl 3.5 L GAS
Expedition | 2018-2021 | King Ranch, Limited, Max King Ranch, Max Limited, Max Platinum, Max SSV, Max XL, Max XLT, Platinum, SSV, XL, XLT | 6 Cyl 3.5 L GAS
Expedition | 2022-2023 | King Ranch, Limited, Max King Ranch, Max Limited, Max Platinum, Max SSV, Max XL, Max XLT, Platinum, SSV, Timberline, XL, XL STX, XLT | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
Other Name: Control; HVAC Temperature Control Panel; Climate Control Module; Blower Control Switch; Dash Control Unit
Fits the following Ford Models:
Escape | 2022 | S, SE, SE Hybrid, SE Plug-In Hybrid, SEL, SEL Hybrid, SEL Plug-In Hybrid, Titanium, Titanium Hybrid, Titanium Plug-In Hybrid | 3 Cyl 1.5 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L PLUG-IN HYBRID EV-GAS (PHEV)
Q: How to Service and Repair the A/C Switch in the Auxiliary Climate Control Assembly on Ford Explorer?
A: Start the auxiliary climate control assembly service and repair process by removing the overhead console through its two screws and detaching the bezel. When the removed components are detached you should tackle the auxiliary climate control assembly. The installation of the new assembly requires you to execute the opposite steps of removal.
Q: How to Service and Repair the A/C Switch Control Assembly on Ford Mustang?
A: Service and repair operations on the control assembly start with unmounting the climate control assembly. Next, take off the knob. The removal of all three switches follows the same operating process. First remove the screw after which you should turn the switch before separating it from the control head assembly. Perform the installation by reversing all steps used for removal.
Q: How to service and repair the A/C Switch in the climate control assembly on Ford Ranger?
A: The first step to work on the climate control assembly requires the temperature control knob to reach full COOL. You should begin by disconnecting the audio unit and center instrument panel finish panel through screw removal followed by spring clip disengagement. The electrical connectors need disconnecting before removing screws to remove the climate control assembly. You must disconnect all electrical connectors together with the vacuum connector before you remove the temperature control knob. Release the temperature control switch from the climate control head by unscrewing it yet maintaining contact between the temperature blend door control cable. The installation process starts with steps in reverse order from removal where new climate control assemblies need to have their function selector switch along with blower motor switch brought directly from the original unit.