Expedition | 2018-2021 | King Ranch, Limited, Max King Ranch, Max Limited, Max Platinum, Max SSV, Max XL, Max XLT, Platinum, SSV, XL, XLT | 6 Cyl 3.5 L GAS
Expedition | 2018-2021 | King Ranch, Limited, Max King Ranch, Max Limited, Max Platinum, Max SSV, Max XL, Max XLT, Platinum, SSV, XL, XLT | 6 Cyl 3.5 L GAS
Expedition | 2022-2023 | King Ranch, Limited, Max King Ranch, Max Limited, Max Platinum, Max SSV, Max XL, Max XLT, Platinum, SSV, Timberline, XL, XL STX, XLT | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
Other Name: Control; HVAC Temperature Control Panel; Climate Control Module; Blower Control Switch; Dash Control Unit
Fits the following Ford Models:
Escape | 2022 | S, SE, SE Hybrid, SE Plug-In Hybrid, SEL, SEL Hybrid, SEL Plug-In Hybrid, Titanium, Titanium Hybrid, Titanium Plug-In Hybrid | 3 Cyl 1.5 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L PLUG-IN HYBRID EV-GAS (PHEV)
Other Name: Control; HVAC Temperature Control Panel; Climate Control Module; Blower Control Switch; Dash Control Unit
Replaces: CCM-433, LJ6Z-19980-K
Fits the following Ford Models:
Escape | 2020-2023 | Base, S, SE, SE Hybrid, SE Plug-In Hybrid, SE Sport Hybrid, SEL, SEL Hybrid, SEL Plug-In Hybrid, Titanium, Titanium Hybrid, Titanium Plug-In Hybrid | 3 Cyl 1.5 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L PLUG-IN HYBRID EV-GAS (PHEV)
Q: How to Service and Repair the HVAC Control Module on Ford Crown Victoria?
A: The first step before servicing or repairing the Heating Ventilation Air Conditioning (HVAC) module requires you to depower the supplemental restraint system (SRS). The service begins with removing the finish panel and disconnecting the electrical connector. Tear out the four screws which hold the HVAC module before pulling out the module from its place. You must detach the vacuum harness nuts then disconnect its harnesses followed by disconnecting all wire harness connectors to complete HVAC module removal. To install the component follow the reverse steps of removal.
Q: How to service the HVAC control module on Ford Expedition?
A: The first step to service the HVAC control module consists of eliminating stops then lowering the glove compartment door and finally taking out the kickpad. The aspirator hose needs to be disconnected from its bracket during the service operation. The part should be displayed out of vehicle position. Start by disconnecting the connectors from the instrument panel while disengaging the mounting bracket of the blower motor speed control. You should remove the blower motor speed control from the mounting bracket by letting go of the retaining tabs. To install the component follow the reverse order of removal steps.
Q: How to service and repair the HVAC Control Module on Ford Edge?
A: The service and repair process for the climate control module starts by taking off the center instrument panel finish panel first. You must first detach the four screws that keep the climate control module in place before gently taking out the module. Reinstall the climate control module after placing its spacers in the correct position. The reverse order of previous uninstallation steps should be used for final installation completion.